1 / 15

Test and Characterization of a Variable-Capacity Multilevel DRAM

Test and Characterization of a Variable-Capacity Multilevel DRAM. VLSI Test Symposium May 1 - 5, 2005 John Koob , S. Ung, A. Rao, D. Leder, C. Joly, K. Breen, T. Brandon, M. Hume, B. Cockburn, D. Elliott VLSI Design Laboratory University of Alberta Edmonton, Canada. 17/2/2005 v3.2.

dyre
Télécharger la présentation

Test and Characterization of a Variable-Capacity Multilevel DRAM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Test and Characterization of a Variable-Capacity Multilevel DRAM VLSI Test Symposium May 1 - 5, 2005 John Koob,S. Ung, A. Rao, D. Leder, C. Joly, K. Breen, T. Brandon, M. Hume, B. Cockburn, D. Elliott VLSI Design Laboratory University of Alberta Edmonton, Canada 17/2/2005 v3.2

  2. Outline • Motivation • MLDRAM Overview • MLDRAM Fault Model • Basic Functional Test • Cell Voltage Drift Test • Multilevel March Test • Bitline Coupling Test • Cell Plate Bump Test

  3. Motivation Source: Computer Architecture: A Quantitative Approach, Hennessy and Patterson, 2003

  4. DRAM vs. MLDRAM

  5. Possible Storage Encoding Scheme • 6 signal levels • 5 binary bits are encoded from 2 cells • 2.5 bits/cell on average

  6. Read Operation in 4-Level MLDRAM Reference Generation (1) Reference Generation (2) Access Data & Reference Cells Copy Signal and Parallel Sense Restore Accessed Data Cells

  7. Multilevel DRAM Fault Model • Fault types: • SAF0/SAF1 - involves single code bit • SAF-random - several causes • SCF - interdependence among code bits • data retention fault • degraded noise margins Source: Redeker, et al, “Fault Modeling and Pattern-Sensitivity Testing for a Multilevel DRAM,” MTDT, July 2002, pp. 117-122.

  8. Basic Functional Test Results 1. Write data level to base cell B 2. Write contrasting levels to N1 & N2 3. Read cell B and verify

  9. Cell Voltage Drift Test 1. Write highest signal level to a set of cells 2. Wait for a predefined drift time 3. Test drift using page-mode read Graphical analysis using drift bitmaps: • new way to monitor cell drift • detects stuck bits, bitlines and wordlines • detects sense amplifier offsets

  10. Cell Drift Test Results Predominant Thermometer Code

  11. Multilevel March Test • A 12n march test for six-level MLDRAM (using 5-digit thermometer codes):  {w00000}  {r00000, w00001}  {r00001, w00011}  {r00011, w00111}  {r00111, w01111}  {r01111, w11111}  {r11111} • 100% cell yields (four-level, 55-fF cell)

  12. Inter-Bitline Coupling Test

  13. Bump Test • Nominal curve is centered between two references • DUT circuit to control back-bias

  14. Multilevel Bump Test • Curves are from bump tests for each level • Nominal references: 0.3V, 0.9V, 1.5V • Lowest noise margin: sensing 111

  15. Conclusions • MLDRAM success depends on effective characterization and testing • 100% cell yield for 55-fF cells in 4-level mode • Future test chips need a DRAM process • Industrial partners are welcome • Could fix the DRAM-disk access time gap by: • Increasing capacity vs. DRAMs • Sacrificing performance to improve cost per bit • Revisiting theextended storagehierarchy stage

More Related