Remove Insta-DE2 air bubbles

1. How to Flatten Air Bubbles on Elite Screens’ Insta-DE2 (Dry-Erase Screen) Series (Instruction apply only for Insta-DE2 w/ Zinsser® Sure Grip Adhesive Glue) For bubbles located in the center of the screen: 1.You will need one small syringe with a needle. (suggest 3ml, W/27G x 1 ¼” ) 2.Fill the syringe with 3ml. of water. 3.Inject the bubble with water using the syringe. The water will dissolve the glue. 4.With a smooth, non-abrasive scraping tool, squeeze the water out through the injected hole. 5.Dry the excess water with a lint-free towel. Inject water Squeeze water out through hole Finished Look For bubbles located near an edge of the screen: 1.You will need one small syringe with a needle. (suggest 3ml, W/27G x 1 ¼” ) 2.Fill the syringe with 3ml. of water. 3.Inject the bubble through the edge nearest to it with water using the syringe. The water will dissolve the glue. 4.With a smooth, non-abrasive scraping tool, squeeze the water out through that same edge. 5.Dry the excess water with a lint-free towel. *If the bubbles do not smooth away, refer to steps 3-5 from instructions for bubbles located in the center of the screen. www.elitescreens.com 1