1 / 14

Setting up GridGain-1.5.1

Agya Adueni. Setting up GridGain-1.5.1. Hardware. The machine featured in this tutorial is a Dell Dimension 8200 with 512mb of RAM and a P4 1.8GHz processor. It ran Fedora Core 6. Prerequisites. Java 1.5 or later should be installed. It can be obtained from http://java.sun.com/javase/6/

errin
Télécharger la présentation

Setting up GridGain-1.5.1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Agya Adueni Setting up GridGain-1.5.1

  2. Hardware • The machine featured in this tutorial is a Dell Dimension 8200 with 512mb of RAM and a P4 1.8GHz processor. • It ran Fedora Core 6

  3. Prerequisites • Java 1.5 or later should be installed. It can be obtained from http://java.sun.com/javase/6/ • Download a copy of the gridgain installation. It can be found at http://www.gridgain.com/past_downloads.html • For this presentation, the gridgain installation is located in /opt.

  4. Getting Started • Change directory into the /opt folder • Add execute permissions to the GridGain installation

  5. Run the GridGain installation • GridGain welcome screen. Click Next

  6. Accept the agreement • Choose installation folder

  7. Installing … • Done!! Well, not quite yet

  8. Point to the location of the internet browser executable on your system

  9. Running GridGain node • Change directories to the installed GridGain application • Go into the bin folder

  10. Environment Variables • GridGain needs two environment variables to be set. GRIDGAIN_HOME and JAVA_HOME. Open up an editor to the file /etc/profile • Add the highlighted lines (these must match the locations of your java installation and gridgain installation) to the file.

  11. Run GridGain • Run GridGain • Oops! This was caused by the local firewall

  12. Disable Firewall • Run the highlighted command to disable the firewall • Results

  13. Run Gridgain… again • Try running the node again

  14. Success!!! • You have successfully installed GridGain-1.5.1 • Congratulations!!!

More Related