1 / 7

INDEX

Wind Mill Side Cutter. INDEX. 1. Features of Wind Mill. 2. Code System. 3. Recommended condition. 4. Machining example. Wind Mill Slotting workpieces with corner radii. Wind Mill. CONVENTIONAL TOOL. VARIOUS CORNER RADIUS.

estelleanderson
Télécharger la présentation

INDEX

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wind Mill Side Cutter INDEX 1. Features of Wind Mill 2. Code System 3. Recommended condition 4. Machining example

  2. Wind MillSlotting workpieces with corner radii • Wind Mill • CONVENTIONAL TOOL VARIOUS CORNER RADIUS IDEAL GEOMETRY for SUPERIOR SURFACE SNHT 11 □ □ R/L-WX SNHT 12 □ □ R/L-WX • Corner Radius - Various nose R (R0.2~R2.0) • Perpendicular slot - Right Angle(90˚) Slotting - 4.0~14.0mm Slot Width Range

  3. Wind MillSlotting workpieces with corner radii • Features • Foolproof design • Ideal Geometry • Perpendicular slot Radius Flat Conventional WIND MILL - 90 ˚ Right angle slotting - Superior surface roughness • A unique recess design on • the minor cutting edge • reduces cutting load and • improves tool life. • - Grooving and parting off • machining with high • accuracy. - Special clamping system prevents fracture by incorrect clamping of R/L type.

  4. Wind MillSlotting workpieces with corner radii • Features • Various Corner Radius - Machining work pieces with corner radii of varying size and width. - Nonstandard sizes not on the above list can be supplied in 2~3 weeks.

  5. Wind MillSlotting workpieces with corner radii • Code System • Designation (Cutter) • Designation (Insert)

  6. Wind MillSlotting workpieces with corner radii • Recommended cutting conditions

  7. Wind MillSlotting workpieces with corner radii • Field test example KSF140R-T14-HM-2 18% UP 45set (45*4=180ea) 38set (38*4=152ea) KORLOY WINDMILL S-Maker .

More Related