1 / 29

EXI 450 Main Frame

EXI 450 Main Frame. Presented By: Team LiquidWorks Members Copeland Felts Matt Darley Rufus Meyers Owen Bryan. Project Proposal Design Process Parts Created Project Assembly/Bill of Materials Exploded Assembly 2D Multiviews of Parts and Dimensions Modifications

fagan
Télécharger la présentation

EXI 450 Main Frame

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EXI 450 Main Frame Presented By: Team LiquidWorks Members Copeland Felts Matt Darley Rufus Meyers Owen Bryan

  2. Project Proposal • Design Process • Parts Created • Project Assembly/Bill of Materials • Exploded Assembly • 2D Multiviews of Parts and Dimensions • Modifications • Group Member Responsibilities • Design Challenges • Conclusion • References Overview

  3. Design and modify the EXI 450 main frame using SolidWorks to better suit the needs of modern hobbyists Total Parts=60 Project Proposal

  4. Each team member of Team LiquidWorks was given at least two parts to create using SolidWorks. The Design Tree to the left shows the steps used in order to create the part shown above. LiquidWorks Design Process

  5. As we can see, first the basic sketch is created followed by the revolve feature to create the part. Then another sketch is created and the cut-extrude feature is the used to complete the part. …Design Process Continued

  6. Parts Created By: Team LiquidWorks Upper Frame

  7. Lower Frame

  8. Bottom Frame

  9. Main Frame Spacer

  10. Lower Frame Spacer

  11. Tail Boom Block

  12. Tail Boom

  13. Battery Tray

  14. Small Screw .075in X .22in

  15. Large Screw .55in x .22in

  16. Large Screw with Small Head.55in x .22in

  17. EXI 450 Main Frame Project Assembly

  18. EXI 450 Main Frame Project Assembly

  19. Bill of Materials

  20. Exploded View

  21. 2D Multiviews of Parts with Dimensions Upper Frame

  22. Lower Frame

  23. Lithium Battery-Used in RC Helicopters Dimensions-138.93mm * 36.08mm * 38.00mm Battery Tray-Used to support the battery on the EXI 450 Dimensions-54.66mm * 25.85mm * 6.00mm Modifications Implemented by Team LiquidWorks

  24. Battery Tray is too short to hold most conventional lithium batteries used in RC products. Allows for batteries to be strapped on more securely New Battery Tray that is nearly double in length Battery Tray Modification

  25. .48 in * .15in Access slots were created to make mounting hardware on the inside of the model easier Screws extremely hard to reach on the inside when mounting hardware Upper Frame Modifications

  26. Group Member Responsibilities

  27. Difficulties • Extremely small components • Precision cut parts • Built to be a precise flying model • Some parts were no more than .03 inches thick • Parts are made to be compatible (lots of holes) Solution= Hours of staring at a computer screen and Calipers Design Challenges

  28. LiquidWorks • Created a 3D Model of the EXI 450 • Created a set of working drawings- (Assembly, Exploded Assembly, 2D Drawings) • Modified the Upper Frame and Battery Tray • End Result Provides Adequate Representation and Successfully Displays the Efforts and Ideas of Team LiquidWorks • Things to do Differently-Pick a More Simple Project Conclusions

  29. Pictures http://www.gagewebsite.com/2011/04/09/calipers-2/ http://sclick.net/new-gadgets-2/funny-gadgets-for-kids-exi-450zl-mini-heli-fun-gadgets-toys-gadgets-for-boys.html http://i1.ytimg.com/vi/Qnnlf7vaCqA/0.jpg http://www.wayneschools.org/images/pages/N422//Solidworks-Logo.png http://www.hpiracing.com/graphics/parts/101942/101942_000p.jpg Photos Courtesy of Mr. Matt Darley and Mr. Copeland Felts References

More Related