1 / 26

2014: Securing External/International Research Grants

2014: Securing External/International Research Grants. Lee Chew Tin UTM International ctlee@utm.my. Inspiring Creative & Innovative Minds. www.utm.my. 2014: The Challenge. Reduced RUG allocation Where does the budget gone to? Likely to MOE External grants: ERGS, PRGS, KTP, …

fauna
Télécharger la présentation

2014: Securing External/International Research Grants

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2014: Securing External/International Research Grants Lee Chew Tin UTM International ctlee@utm.my Inspiring Creative & Innovative Minds www.utm.my

  2. 2014: The Challenge • Reduced RUG allocation • Where does the budget gone to? • Likely to MOE External grants: ERGS, PRGS, KTP, … • Requirement for External Grant: must involve external stakeholders • Eg. Science Fund (MOSTI): must involve RIs • Eg. KTP-Industry: must involve SMEs/industry • Eg. KTP-Community: must involve community/Gov Agency/NGOs • Many International Grants also engage SMEs, industry..

  3. Engaging External Stakeholders • Relevance • Contribution to Nation economy generation • Impact to society

  4. TPU KFA-Securing International Grant : The Issue at Hand:

  5. Project Objective:

  6. Balance Score Card & KAI (overall project):

  7. Strengthening UTM Capacity Building for Raising External & International Funds THE NEEDS World Ranking- THE, WUR

  8. UTM Capacity Building • Following TNCPI KFA Taskforce Project: Securing International Grant • Each RA to nominate 1-2 committee members • Priority: Staff with PhD graduated from EU countries (Germany/France/..)

  9. EU Fund 2014-2020 NEW HOT Horizon 2020 Erasmus+

  10. Strategy #1. Find Connections and Proposal Call via Linkedin for Horizon2020 Example of post obtained from Linkedin: • LOOKING FOR PARTNERS AND CONSORTIUMS FOR WASTE-2-2014 callJakub JohnCEO & Chairman of the management board of VIA ALTA a.s.We are looking for partners and/or consortiums to join in the WASTE-2-2014 call. We are Czech SME specialized of biowaste and food waste treatment and technology. Please contact through LinkedIn or on john@via-alta.cz.

  11. Start yourself • Join Linkedin – many groups available for Erasmus + and Horizon2020

(1) For horizon2020, Click the link below:

http://www.linkedin.com/groups?gid=3731775&trk=my_groups-b-grp-v

(2) Then, click the yellow "JOIN GROUP" button • Deadlines http:bit.ly/H2020Deadlines

  12. More Proposal calls… • LOOKING FOR PARTNERS FOR A H2020 FUNDING CALL (WASTE-3-2014) ON RECYCLING OF RAW MATERIALS FROM PRODUCTS AND BUILDINGS OR (NMP-18-2014) ON MATERIALS SOLUTIONS FOR USE IN THE CREATIVE INDUSTRY SECTORMihalis Iraklis PanagiotidisProfessor of Nutrition & Toxicology and Department Head of Human Health, Heriot Watt University, School of Life SciencesTop ContributorWe are a multidisciplinary team of academics based at Heriot Watt University aiming to develop a proposal in the area of “Sustainable eco-innovation towards zero waste economy in the built environment”. In general, the construction and demolition (C&D) sector is the largest contributor of waste globally and, in the UK alone, as it is responsible for generating 120 million tonnes of waste every year. In addition, given the global resource constraints, recovery and re-use of raw C&D waste materials (minerals, metals and organic materials) are increasingly emerging as factors of utmost importance in providing the best overall environmental, economic and societal outcomes. The vision of this project will be to foster economically and environmentally sustainable solutions for the re-use of raw materials in the built environment. The strategies we will bring to fore underpin cost-effectiveness and eco-friendliness by minimising the need for bulk waste/material shipment and promoting near-zero waste in the C&D sector. This is achieved by delivering eco-innovation for the on-site closed-loop re-processing of C&D waste into new building materials. For these reasons, a range of R&D and international co-operation activities pertaining to the theme of re-using mineral resources from C&D waste in the built environment will be planned and structured around a case study involving earth construction. Thus, we would like to bring together a cross-disciplinary consortium that will address the proposed eco-technology in its entirety, including: (1) resolving engineering challenges, (2) ensuring public and on-site health and safety issues, (3) investigating societal, psychological and marketing aspects and (4) delivering viable construction management, business and regulatory models. Ultimately, our proposal will aim to (i) assimilate best practices and disseminate latest advances in C&D waste re-use to academic industrial and governmental/regulatory bodies, (ii) act as a point of reference in promoting the establishment of standards and legislation for the re-use of recycled C&D waste into new building materials and processes and (iii) establish an international pool of cross-trained pioneers with the necessary interdisciplinary expertise and global perspective required to lead the adoption of sustainable eco-innovation in the built environment globally. If such opportunity is of interest to you, I would greatly appreciate letting me know as to how would your group and/or Company be able to contributing in this project. You can contact me directly at M.Panagiotidis@hw.ac.uk

  13. Getting Started“Registration onto ECAS & Expert ProFILE” Dr. Nadia Adrus, FKK

  14. ECAS European Commission Authentication Service

  15. ECAS Registration http://ec.europa.eu/europeaid/work/onlineservices/pador/register_en.htm Click continue

  16. Fill in your particular Click sign up

  17. Successful Login

  18. ECAS EXPERT Click LOGIN 4. http://ec.europa.eu/research/participants/portal4/desktop/en/experts/index.html

  19. Register as EXPERT Click

  20. Fill in your particular

  21. (Cont.)

  22. (Cont.) Complete your profile in each tab below: Once completed, your status is now valid

  23. Login to PADOR • "Potential Applicant Data Online Registration” (Online Registration for grant's applicants) http://ec.europa.eu/europeaid/work/onlineservices/pador/index_en.htm UTM PIC NO: 953932242 VAT No. PU(A)86/1972

  24. Manual • ECAS Expert http://ec.europa.eu/research/participants/help/display/empp/1.Accessing+the+Registration+Service • Horizon 2020 http://ec.europa.eu/research/participants/docs/h2020-funding-guide/index_en.htm

  25. Securing International Grants Taskforce More are welcomed for Capacity Building Preferbly every RA/CoE send 1-2 representative Contact: ctlee@utm.my

  26. Thank you

More Related