1 / 4

Effect of Rotation on L-H Threshold Approved 2008

Effect of Rotation on L-H Threshold Approved 2008. Effect of Rotation on L-H Threshold (NBI-based) Use n=3 braking to change rotation and study effect on L-H threshold power Mimics, to some extent, effect of ripple on threshold High priority ITER topic NHTX-, CTF-relevant

freira
Télécharger la présentation

Effect of Rotation on L-H Threshold Approved 2008

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Effect of Rotation on L-H ThresholdApproved 2008 Effect of Rotation on L-H Threshold (NBI-based) Use n=3 braking to change rotation and study effect on L-H threshold power Mimics, to some extent, effect of ripple on threshold High priority ITER topic NHTX-, CTF-relevant Attempted last year, but found L-H in OH phase (want in auxiliary heated phase to test different beam torques) Establish baseline discharge (double-null) Establish power threshold with no braking (Ip=800 kA, BT=4.5 kG) Vary voltage of source A (add B or C if necessary) Apply n=3 braking (starting at 500 A and increase to level where rotation affected) Establish threshold at new value of rotation Repeat for ~3 levels of rotation Li not necessary, but important to establish reproducible front end

  2. Baseline Discharge (no Li)

  3. Establish Parametric Dependence of PL-H With No Braking • Ip scan • Establish threshold for three values of Ip • 700, 900, 1100 kA at 5.0 kG • BT scan • Establish threshold for three values of BT • 3.5, 4.5, 5.5 kG @ 1.0 MA • Use same baseline as for rotation scan (no applied fields, no OH H-mode) • Li not necessary

  4. Degradation of Confinement with BetaApproved 2008 • Idea is to hold collisionality fixed and perform beta (power) scan to assess degradation of confinement with beta • ITPA joint experiment TC-1 • XP approved and partially run • Little or no degradation observed in strongly shaped plasmas (kappa~2.1, delta~0.65), consistent with DIII-D, JET • This part was completed in plasmas having Type V ELMs • Second part is to redo in weakly shaped plasmas (kappa~1.8, delta~0.45) • Did this as well, but found large variation in ELMs from low to high powers • Observed very strong degradation, but could have been due to different ELMs • Want to redo scan in plasmas with ELMs suppressed by Lithium • Need to establish plasma that will allow > 4 MW power without hitting beta limit (an issue last year) for baseline • Can be conducted early in the run, as long as proper shot is identified • ½ day experiment

More Related