1 / 25

9.1

9.1. Sampling Distributions. Parameter. A number that describes the population Symbols we will use for parameters include m - mean s – standard deviation p – proportion (p) a – y-intercept of LSRL b – slope of LSRL. Statistic.

gage
Télécharger la présentation

9.1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 9.1 Sampling Distributions

  2. Parameter • A number that describes the population • Symbols we will use for parameters include m - mean s – standard deviation p – proportion (p) a – y-intercept of LSRL b – slope of LSRL

  3. Statistic • A number that that can be computed from sample data without making use of any unknown parameter • Symbols we will use for statistics include x – mean s– standard deviation p– proportion a– y-intercept of LSRL b– slope of LSRL

  4. Identify the boldface values as parameter or statistic. A carload lot of ball bearings has mean diameter 2.5003 cm. This is within the specifications for acceptance of the lot by the purchaser. By chance, an inspector chooses 100 bearings from the lot that have mean diameter2.5009cm. Because this is outside the specified limits, the lot is mistakenly rejected.

  5. Why do we take samples instead of taking a census? • A census is not always accurate. • Census are difficult or impossible to do. • Census are very expensive to do.

  6. A distribution is all the values that a variable can be.

  7. The sampling distribution of a statistic is the distribution of values taken by the statistic in all possible samples of the same size from the same population.

  8. Consider the population – the length of fish (in inches) in my pond - consisting of the values 2, 7, 10, 11, 14 What is the mean and standard deviation of this population? mx = 8.8 sx = 4.0694

  9. Let’s take samples of size 2 (n = 2) from this population: How many samples of size 2 are possible? 5C2 = 10 mx = 8.8 Find all 10 of these samples and record the sample means. What is the mean and standard deviation of the sample means? sx = 2.4919

  10. Repeat this procedure with sample size n = 3 How many samples of size 3 are possible? 5C3 = 10 mx = 8.8 What is the mean and standard deviation of the sample means? Find all of these samples and record the sample means. sx = 1.66132

  11. mx= m sx What do you notice? • The mean of the sampling distribution EQUALS the mean of the population. • As the sample size increases, the standard deviation of the sampling distribution decreases. as n

  12. A statistic used to estimate a parameter is unbiased if the mean of its sampling distribution is equal to the true value of the parameter being estimated.

  13. The spread of the sampling distribution depends on the sample size, not the size of the population!

  14. Properly chosen statistics computed from random samples of sufficient size will have low bias and low variability.

  15. 9.3 Sampling Distributions of Means

  16. mx= m s sx = n General Properties Rule 1: Rule 2: This rule is approximately correct as long as no more than 10% of the population is included in the sample

  17. General Properties Rule 3: When the population distribution is normal, the sampling distribution of x is also normalfor any sample size n.

  18. General Properties Rule 4: Central Limit Theorem When n is sufficiently large, the sampling distribution of x is well approximated by a normal curve, even when the population distribution is not itself normal. CLT can safely be applied if n exceeds 30.

  19. ARMY HELMETS EX) The army reports that the distribution of head circumference among soldiers is approximately normal with mean 22.8 inches and standard deviation of 1.1 inches. a) What is the probability that a randomly selected soldier’s head will have a circumference that is greater than 23.5 inches? P(X > 23.5) = .2623

  20. P(X > 23.5) = b) What is the probability that a random sample of five soldiers will have an average head circumference that is greater than 23.5 inches? Do you expect the probability to be more or less than the answer to part (a)? Explain What normal curve are you now working with? .0774

  21. If n is largeor the population distribution is normal, then has approximately a standard normal distribution.

  22. Suppose a team of biologists has been studying the Pinedale children’s fishing pond. Let x represent the length of a single trout taken at random from the pond. This group of biologists has determined that the length has a normal distribution with mean of 10.2 inches and standard deviation of 1.4 inches. What is the probability that a single trout taken at random from the pond is between 8 and 12 inches long? P(8 < X < 12) = .8427

  23. P(8< x <12) = .9978 x = 11.23 inches What is the probability that the mean length of five trout taken at random is between 8 and 12 inches long? What sample mean would be at the 95th percentile? (Assume n = 5) Do you expect the probability to be more or less than the answer to part (a)? Explain

  24. P(x >12.1) = .0062 A soft-drink bottler claims that, on average, cans contain 12 oz of soda. Let x denote the actual volume of soda in a randomly selected can. Suppose that x is normally distributed with s = .16 oz. Sixteen cans are to selected with a mean of 12.1 oz. What is the probability that the average of 16 cans will exceed 12.1 oz? Do you think the bottler’s claim is correct? No, since it is not likely to happen by chance alone & the sample did have this mean, I do not think the claim that the average is 12 oz. is correct.

  25. A hot dog manufacturer asserts that one of its brands of hot dogs has a average fat content of 18 grams per hot dog with standard deviation of 1 gram. Consumers of this brand would probably not be disturbed if the mean was less than 18 grams, but would be unhappy if it exceeded 18 grams. An independent testing organization is asked to analyze a random sample of 36 hot dogs. Suppose the resulting sample mean is 18.4 grams. Does this result indicate that the manufacturer’s claim is incorrect? What if the sample mean was 18.2 grams, would you think the claim was incorrect? Yes, not likely to happen by chance alone. No

More Related