1 / 4

MIT Self-Compensating Hydrostatic Bearings

MIT Self-Compensating Hydrostatic Bearings. 26 February 2010 Professor Alex Slocum Gerald Rothenhofer Matt Angle. A Quick Primer on Hydrostatic Bearings. High-Pressure Lubricant. Are Used to Support the Crankshaft in Automotive Engines

ganesa
Télécharger la présentation

MIT Self-Compensating Hydrostatic Bearings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MIT Self-Compensating Hydrostatic Bearings 26 February 2010 Professor Alex Slocum Gerald Rothenhofer Matt Angle

  2. A Quick Primer on Hydrostatic Bearings High-Pressure Lubricant • Are Used to Support the Crankshaft in Automotive Engines • Pump Forces Fluid Into a Channel and then Between a Shaft and Journal • Shaft Rides on Thin Film of Fluid • Metal-to-Metal Contact and Friction are Reduced Bearing Journal Shaft

  3. Issues with Non-Self Compensating Hydrostatic Bearings • Small Orifices • Used to Create Constant-Pressure Fluid Supply • Are Easily Clogged by Contaminants in Fluid (Especially Sea Water) • Control Loops • ?? • Water Hammer • High Flow Rates Cause Turbulence in Fluid Exit • Shaft Can Oscillate in Unsteady Flow

  4. Why ours is cool • Supply Grooves • Oriented on Inside of Bearing Assembly (Made of Two of These Pieces) • Extend ~180° to Pocket on Opposite Side of Bearing • Function as Orifices in Non-Compensating Bearings • Are Self-Cleaning and Difficult to Clog • Pockets • Bear Load of Shaft • Fed by Supply Channels • How it Works • When Shaft is Displaced, Supply Grooves are Blocked, Pressure Reduced in Pockets on Opposite Side of Shaft • Produces Restoring force

More Related