html5-img
1 / 28

Vehicle Versatility: An Olympic Tradition

Vehicle Versatility: An Olympic Tradition . By: Kevin Uyleman , Tiffany Ng, and Sandy Dos Sanjos. Vehicle Versatility: An Olympic Tradition Group #7 Kevin Uyleman , Sandy dos Anjos , Tiffany Ng Marlborough High School STEM ECHS October 25, 2013. Step 1 Define the Problem.

gareth
Télécharger la présentation

Vehicle Versatility: An Olympic Tradition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Vehicle Versatility: An Olympic Tradition By: Kevin Uyleman, Tiffany Ng, and Sandy Dos Sanjos

  2. Vehicle Versatility: An Olympic Tradition Group #7 Kevin Uyleman, Sandy dos Anjos, Tiffany Ng Marlborough High School STEM ECHS October 25, 2013

  3. Step 1Define the Problem The goals of the project are: • To make an egg-carrying device • Make it cost efficient • Make it safe for the egg • Make it float in water • Make it fast when it falls • Make it accurate when it falls • Make it be able to withstand the power of a medicine ball

  4. Step 2 Research the Problem The parachute had several designs made by different kinds of people such as Leonardo da Vinci (who used the weight of the jumper) or Jean-Pierre Blanchard (who focused on the safety limits). Designed by FaustoVeranzio Fact: The word parachute was made by combining the two words para- and chute Para means “Defense against” while chute was French for “Fall.”

  5. Step 2Research the problem The Wright Brothers came up with the designs of many planes and gliders and made many improvements. This led from wooden airplanes to high-powered biplanes.

  6. Step 3develop possible solutions The egg could be held in a carton cell and placed in a Styrofoam cup. A Styrofoam bowl could act as a roof to prevent the egg from falling out, it would taped from the inside of the bowl to the inside of the cup. Also, a trash bag parachute to slow it down during the air challenge.

  7. Step 3develop possible solutions Rubber bands can take a large amount of force. So we could cut out the bottom of the cup and glue 5-6 rubber bands both sides of the bottom of the cup.

  8. Step 3develop possible solutions The egg could be held in place buy string on all sides. Also, a wooden base could protect the egg from the air challenge and water challenge; it will also help the device float.

  9. Step 4pick the best possible solution We decided to go with these design ideas: • Styrofoam Cup with a Styrofoam Bowl over it • Trash bag parachute • Wooden base • Rubber bands to cushion the blow in the air challenge

  10. Step 5Create A prototype

  11. Step 5Create A prototype Procedure: • Place an egg carton cell inside of a cup. (on the bottom) • Tape the egg carton cell to the cup from the indie of the cup with duct tape. • Place a Styrofoam cup on top of a Styrofoam bowl. • Tape the Styrofoam cup to the Styrofoam bowl from the inside of the cup with duct tape. • Cut out a hole out of the bottom of the cup. • Stretch a rubber band tightly and on both sides of the cup and glue both sides of the rubber bands tot the cup.

  12. Step 5Create a PROTOTYPE Procedure (cont.): • Repeat step 6 four more times and cover the entire bottom of the cup with stretched rubber bands. • Stretch another rubber band tightly and hold it down to the cup the opposite two directions you did with the first 3 rubber bands • Cut 2 pieces of the wooden plank and make the length of them be 3 ½ inches. • Tape the 2 pieces of 3 ½ inch wood together at the center of both wooden planks. Tape them all of the way around. • Cut two more pieces of wood and make the length of them be 1 inch. • Cut two more pieces of wood and make the length of them ½ inches.

  13. Step 5Create a prototype Procedure (cont.): • Glue the 2 1 ½ inch wooden planks to the two wooden planks that are taped. Glue them right next to where you taped the wooden planks. Do this on both sides of the tape. • Glue the two ½ inch wooden planks onto the two 1 ½ inch wooden planks. Glue the two ½ inch wooden planks on the inside of the two 1 ½ wooden planks. (The inside is the closest to the tape) • Glue the two ½ inch wooden planks to the bottom of the cup. • Tape the trash bag to the cup by placing tape on opposite sides of the cup and opposite sides of the trash bag

  14. Isometric Drawing

  15. Step 6test and evaluate Water Challenge Goals: • Make the vehicle float for 2 minutes • Keep the egg safe

  16. Step 6Test and Evaluate Water Challenge Results: • Sank • Floated for 1.60 seconds

  17. Step 6Test and evaluate Air Challenge Goals: • Make the vehicle land as close to a target as possible • Make the vehicle as fast a possible • Prevent the egg from cracking

  18. Step 6Test and evaluate Air Challenge Results: • Landed 0.51 meters from the target • Fell to the ground in 1.59 seconds (avg. speed-15.66m/s) • Egg cracked

  19. Step 6Test and evaluate Land Challenge Goals: • Keep the egg from cracking • Prevent the device from breaking

  20. Step 6Test and Evaluate Land Challenge Results: • Egg did not crack • Device broke

  21. Water Challenge

  22. Air Challenge

  23. Land Challenge

  24. Step 8redesign Ideas that could have made our design better: • Building a wooden plank platform to help the device float • Cutting the trash bag • Add a wooden barrier to protect the device from the medicine ball

  25. Any QUESTIONS?

  26. reference • Acceleration. (n.d.). Retrieved September 17, 2013, from http://hyperphysics.phy-astr.gsu.edu/hbase/acca.html • B. (2011, December 10). Stretching Out For Effectiveness [Stretching a rubber band]. Retrieved from http://www.cells-church.com/tag/john-maxwell/ • History of aviation - Wikipedia, the free encyclopedia. (2013, August 29). Retrieved September 17, 2013, from http://en.wikipedia.org/wiki/History_of_aviation#Modern_flight • History of the Airplane. (2010). Retrieved September 16, 2013, from http://www.wright-brothers.org/History_Wing/History_of_the_Airplane/History_of_the_Airplane_Intro/History_of_the_Airplane_Intro.htm • History of the First Airplane. (2009). Retrieved September 16, 2013, from http://www.firstflightcentennial.org/history-of-the-first-airplane/ • Ritter, L. (2010, May). Pack Man | History of Flight | Air & Space Magazine. Retrieved September 30, 2013, from http://www.airspacemag.com/history-of-flight/Pack-Man-.html • [SPAD XIII biplane at Hicks Field]. Retrieved from http://www.cells-church.com/tag/john-maxwell/ • Spangler, S. (n.d.). Amazing Egg Experiments | Experiments | Steve Spangler Science. Retrieved September 30, 2013, from http://www.stevespanglerscience.com/lab/experiments/amazing-egg

  27. Reference (cont.) • The first trace of parachute in 1470 [First Trace of the parachute]. (n.d.). Retrieved from http://www.321chutelibre.fr/fr/content/96-parachute-1 • What is Weight? (n.d.). Retrieved September 17, 2013, from http://www.grc.nasa.gov/WWW/k-12/airplane/weight1.htm

  28. Thank You

More Related