1 / 16

FRAMES AND MACHINES

Today’s Objectives : Students will be able to: a) Draw the free body diagram of a frame or machine and its members. b) Determine the forces acting at the joints and supports of a frame or machine. FRAMES AND MACHINES. In-Class Activities : Check Homework, if any Reading Quiz

gavan
Télécharger la présentation

FRAMES AND MACHINES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Today’s Objectives: Students will be able to: a) Draw the free body diagram of a frame or machine and its members. b) Determine the forces acting at the joints and supports of a frame or machine. FRAMES AND MACHINES • In-Class Activities: • Check Homework, if any • Reading Quiz • Applications • Analysis of a Frame/Machine • Concept Quiz • Group Problem Solving • Attention Quiz

  2. READING QUIZ • 1. Frames and machines are different as compared to trusses since they have ___________. • A) Only two-force members B) Only multiforce members • C) At least one multiforce member D) At least one two-force member • 2. Forces common to any two contacting members act with _______ on the other member. • A) Equal magnitudes but opposite sense • B) Equal magnitudes and the same sense • C) Different magnitudes but opposite sense • D) Different magnitudes but the same sense

  3. Frames are commonly used to support various external loads. APPLICATIONS How is a frame different than a truss? To be able to design a frame, you need to determine the forces at the joints and supports.

  4. “Machines,” like those above, are used in a variety of applications. How are they different from trusses and frames? APPLICATIONS (continued) How can you determine the loads at the joints and supports? These forces and moments are required when designing the machine members.

  5. Frames and machines are two common types of structures that have at least one multi-force member. (Recall that trusses have nothing but two-force members). FRAMES AND MACHINES: DEFINITIONS Frame Machine Frames are generally stationary and support external loads. Machines contain moving parts and are designed to alter the effect of forces.

  6. STEPS FOR ANALYZING A FRAME OR MACHINE 1. Draw a FBD of the frame or machine and its members, as necessary. Hints:a) Identify any two-force members, b) forces on contacting surfaces (usually between a pin and a member) are equal and opposite, and, c) for a joint with more than two members or an external force, it is advisable to draw a FBD of the pin. FAB 2. Develop a strategy to apply the equations of equilibrium to solve for the unknowns. Problems are going to be challenging since there are usually several unknowns. A lot of practice is needed to develop good strategies.

  7. Given: The frame supports an external load and moment as shown. Find: The horizontal and vertical components of the pin reactions at C and the magnitude of reaction at B. Plan: EXAMPLE a) Draw FBDs of the frame member BC. Why pick this part of the frame? b) Apply the equations of equilibrium and solve for the unknowns at C and B.

  8. +  MC = FAB sin45° (1) – FAB cos45° (3) + 800 N m + 400 (2) = 0 FAB = 1131 N EXAMPLE 800 N m 400 N CX CY 1 m 1 m 2 m FBD of member BC B 45° FAB Please note that member AB is a two-force member. Equations of Equilibrium:

  9. Now use the x and y direction Equations of Equilibrium: • +  FX = – CX+ 1131 sin 45° = 0 CX = 800 N • +  FY = – CY+ 1131 cos 45° – 400 = 0 • CY = 400 N EXAMPLE 800 N m 400 N CX CY 1 m 1 m 2 m FBD of member BC B 45° FAB

  10. 1. The figures show a frame and its FBDs. If an additional couple moment is applied at C, then how will you change the FBD of member BC at B? A) No change, still just one force (FAB) at B.B) Will have two forces, BX and BY, at B.C) Will have two forces and a moment at B.D) Will add one moment at B. CONCEPT QUIZ

  11. CONCEPT QUIZ (continued)  D 2. The figures show a frame and its FBDs. If an additional force is applied at D, then how will you change the FBD of member BC at B? A) No change, still just one force (FAB) at B.B) Will have two forces, BX and BY, at B.C) Will have two forces and a moment at B.D) Will add one moment at B.

  12. Given: A frame supports a 50-kg cylinder. Find: The reactions that the pins exert on the frame at A and D. Plan: GROUP PROBLEM SOLVING a) Draw a FBD of member ABC and another one for CD. b) Apply the equations of equilibrium to each FBD to solve for the six unknowns. Think about a strategy to easily solve for the unknowns.

  13. +  MA = CY (1.6) – 50 (9.81) (0.7) – 50 (9.81) (1.7) = 0 ; CY = 735.8 N Applying E-of-E to member ABC: GROUP PROBLEM SOLVING (continued) FBDs of members ABC and CD CY CX 50(9.81) N 0.7 m 1.2 m 1.6 m DX DY • +  FY = AY– 735.8 – 50 (9.81) – 50 (9.81) = 0 ; AY = 245 N • +  FX = CX– AX = 0 ; CX = AX

  14. +  MD = CX (1.2) + 50 (9.81) (0.7) – 735.8(1.6) = 0 ; CX = 695 N Applying E-of-E to member CD: GROUP PROBLEM SOLVING (continued) FBDs of members ABC and CD CY CX 50(9.81) N 0.7 m 1.2 m 1.6 m DX DY • +  FY = DY– 735.8 + 50 (9.81) = 0 ; DY = 245 N • +  FX = DX– 695 = 0 ; DX = 695 N AX = CX = 695 N

  15. 1. When determining the reactions at joints A, B, and C, what is the minimum number of unknowns for solving this problem? A) 3 B) 4 C) 5 D) 6 ATTENTION QUIZ 2. For the above problem, imagine that you have drawn a FBD of member AB. What will be the easiest way to write an equation involving unknowns at B? A)  MC = 0 B)  MB = 0 C)  MA = 0 D)  FX = 0

  16. End of the Lecture Let Learning Continue

More Related