1 / 16

國立台灣海洋大學

National Taiwan Ocean University. 國立台灣海洋大學. 5/9 進度報告. 指導教授:曾慶耀 老師 李信德 老師 學生:李康維 學號: 10067036 日期: 2013/5/9. NTOU-SMCL Ship Maneuvering and Control Laboratory. 1. 小船 實驗 2 . 論文進度. NTOU-SMCL Ship Maneuvering and Control Laboratory. 經由實驗得證: θ LM = (1-r) × θ CR. θ LM.

gavril
Télécharger la présentation

國立台灣海洋大學

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. National Taiwan Ocean University 國立台灣海洋大學 5/9 進度報告 指導教授:曾慶耀 老師 李信德 老師 學生:李康維 學號:10067036 日期:2013/5/9 NTOU-SMCL Ship Maneuvering and Control Laboratory

  2. 1.小船實驗 2.論文進度 NTOU-SMCL Ship Maneuvering and Control Laboratory

  3. 經由實驗得證:θLM=(1-r) × θCR θLM θCR NTOU-SMCL Ship Maneuvering and Control Laboratory

  4. θLM& θVCR NTOU-SMCL Ship Maneuvering and Control Laboratory

  5. θLM & θCR& θVCR NTOU-SMCL Ship Maneuvering and Control Laboratory

  6. θLM+CR & θVCR NTOU-SMCL Ship Maneuvering and Control Laboratory

  7. θLM & θCR& θVCR θLM+CR & θVCR θLM& θVCR NTOU-SMCL Ship Maneuvering and Control Laboratory

  8. θLM & θCR& θVCR θLM+CR & θVCR θLM& θCR NTOU-SMCL Ship Maneuvering and Control Laboratory

  9. Thank youfor your attention. NTOU-SMCL Ship Maneuvering and Control Laboratory

  10. 以 LQR+PI控制法則實現倒單擺之直立定位模擬 NTOU-SMCL Ship Maneuvering and Control Laboratory

  11. 以 LQR+PI控制法則實現倒單擺之直立定位模擬 台車位置 單擺角度 NTOU-SMCL Ship Maneuvering and Control Laboratory

  12. 船隻航向線性二次控制器 未含控制器步階 含控制器步階 NTOU-SMCL Ship Maneuvering and Control Laboratory

  13. Set-point control Often one does not want to make z as small as possible, but instead make it converge asfast as possible to a given constant set-point value r. This can be achieved by making the state x and the input u of the process (2.1) converge to values x and u for which. 回授結構 狀態空間 NTOU-SMCL Ship Maneuvering and Control Laboratory

  14. Set-point control Given the desired set-point r for x, computing x and u is straightforward because (4.1) NTOU-SMCL Ship Maneuvering and Control Laboratory

  15. Set-point control When one wants z to converge to a given set-point value r, the state-feedback controller the closed-loop system is given by NTOU-SMCL Ship Maneuvering and Control Laboratory

  16. Set-point control Set-point NTOU-SMCL Ship Maneuvering and Control Laboratory

More Related