1 / 6

Turning processes.

Turning processes. CGLI 2800 – 705. Turning processes. Turning tapers – Off-setting the tail stock Using the compound slide Using a taper turning attachment Using a form tool. Turning processes. Fixed steady – supports work piece when protruding from chuck.

gay
Télécharger la présentation

Turning processes.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Turning processes. CGLI 2800 – 705.

  2. Turning processes. Turning tapers – • Off-setting the tail stock • Using the compound slide • Using a taper turning attachment • Using a form tool

  3. Turning processes. Fixed steady – supports work piece when protruding from chuck. Taper turning attachment - used in conjunction with feed mechanism. Taper turning. Image:http://www.astronomiainumbria.org

  4. Turning processes. Tailstock off set – by adjusting tailstock the work piece is deflected from the centre lathe axis to permit tapers to be turned. Headstock end – chuck replaced with dead centre and carrier. Work piece is aligned off set. www.tpub.com/.../Od1645/Od16450071im.jpg Off setting the tailstock.

  5. Turning processes. Using travelling steadies. http://www.proxxon-direct.com/acatalog/24406_lrg.jpg

  6. Turning processes. Screw cutting – www.avocetconsulting.com.au

More Related