1 / 15

Patient specific QC in Aarhus

Patient specific QC in Aarhus. Lone Hoffmann Ulrik Vindelev Elstrøm, Mai-Britt Kyed Jørgensen. VMAT introduction. Introduced in May 2009 First patient: June the 17th, 2009 Treated approx. 800 patients Primarily pelvic cancers Prostate, cervix, bladder, anal, rectum,.. Other types:

gelsey
Télécharger la présentation

Patient specific QC in Aarhus

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Patient specific QC in Aarhus Lone Hoffmann Ulrik Vindelev Elstrøm, Mai-Britt Kyed Jørgensen

  2. VMAT introduction • Introduced in May 2009 • First patient: June the 17th, 2009 • Treated approx. 800 patients • Primarily pelvic cancers • Prostate, cervix, bladder, anal, rectum,.. • Other types: • Brain, sarcomas, abdominal

  3. Patient specific QA • Perform Delta4 verification for all patients • Normalization to daily output • Gamma(3,3) > 95 % • Most patients: G(3,3) > 97 %

  4. Test/learning plans • 10 prostate plans (15MV)were created with: • 250MU, 500MU, 750Mu, 1000MU, 2000MU • In 1 or 2 arcs • 10 H&N plans (6MV) were created with: • 250MU, 500MU, 750Mu, 1000MU, 2000MU • In 1 or 2 arcs • 2 Gy/fx

  5. G(3,3) vs. #MUs • G(3,3) decreases as a function of MUs • Planning criteria: MU < 400 for 1/2 arcs

  6. G(3,3) vs. accelerator • Differences between accelerators

  7. Test plans used for QA • 6 of the test plans are use for QA 4 times a year each acc. • Plans with high G(3,3) are very stable (within 2-4%) Low/moderate modulation High modulation

  8. Test plans used for QA • Some accelerators are more stable than others • Acc1 performs bad in autumn 2011 – no problems with mashine QC

  9. Acc QC vs. Patient spec QC • Problems with acc QC on acc 5 (spring 2011) • Not seen for patient specific QC Low dose rate DRMLC test

  10. Real patient plans • Reproducibility for each acc • Difference between acc – not seen with acc QC acc3

  11. True beam • 5 patients treated at Clinac and True beam • G(3,3) does not depend on Clinac/True beam? • MeanG(Clinac)=98.4% • MeanG(TrueBeam)=99.0%

  12. Portal dosimetry • Use EPID/MVD for patient specific QC • Fast measurement • Ideal for routine measurements

  13. Delta4 vs. PDI • Perform Delta4 and PDI measurement consecutively at same accelerator • Preliminary results, Oct-Dec 2011: • 68 plans (1,2, ..6 arcs) • 127 single arcs • Single arcs • G(3,3)D4: • 1.7% higher than G(3,3)PDI • Plans • G(3,3)D4: • 1.0% higher than G(3,3)PDI • Pass criteria: • G(3,3)D4: 95% G(3,3)PDI: 94%

  14. Work in Progress • Measurement of D4 and PDI for same plan at different accelerators • Analysis of data (approx 100 plans and 10 new plans pr week) • Workflow today: • Daily PDI; used for accept/reject • Weekly D4; used for check • Future: • Only PDI • New/additional machine QC program

  15. Machine QC program • MV imager: • Test of ”clinical” dose rates • Test of reverse gantry direction • Test of gantry position • Delta4 • Still of measurement of 6 test plans 4xyear each accelerator

More Related