1 / 25

Concept V2.5

Concept V2.5. Lesson 11 Objectives: After completing this lesson, the learner will be able to: Define the configuration rules associated with the Quantum Controller. Perform the configuration using Concept software. Create an I/O map using the appropriate configuration software.

genica
Télécharger la présentation

Concept V2.5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Concept V2.5 • Lesson 11 Objectives: • After completing this lesson, the learner will be able to: • Define the configuration rules associated with the Quantum Controller. • Perform the configuration using Concept software. • Create an I/O map using the appropriate configuration software. • Establish special drop characteristics and I/O module setup • Connect to a Quantum controller. • Download a configuration and I/O map to a Quantum controller.

  2. Concept V2.5

  3. Concept V2.5

  4. HW State-RAM DDI ... 1:1 - 1:32 1:1 1x DDO ... 0:1 - 0:32 0x 0:1 AVI ... 3:1 - 3:8 3x 3:1 AVO ... 4:1 - 4:4 4x 4:1 I/O Map Ranges Concept V2.5 • I/O Mapping to State Ram FieldDevices UserLogic

  5. Concept V2.5 • I/O Map Overview Screen

  6. Concept V2.5

  7. Concept V2.5 • Select the required Module

  8. Concept V2.5 • Module Addressing

  9. Concept V2.5 • Module Parameters

  10. Concept V2.5 • Module Parameters (Analog Input Module) • Select required ranges

  11. Concept V2.5 • Module Parameters Help Screen

  12. Concept V2.5 • Module Parameters (Analog Output Module) • Select required output behavior on Timeout

  13. Concept V2.5 • Module Parameters (Discrete Output Module) • Enter required output behavior on Timeout

  14. Concept V2.5 • Connecting to a Quantum PLC

  15. Concept V2.5 • Download and Start a Program

  16. Concept V2.5 • PLC Simulation • Two PLC simulators • Used for online testing of the IEC user program (FBD, SFC, LD, IL, and ST) without any hardware. • SIM (16 Bit) • Simulates a Quantum PLC connected via Modbus Plus. • This simulator is available under Windows 3.1, Windows for Workgroups 3.11, Windows 95 and Windows NT. • Concept PLCSIM32 (32 Bit) • Simulates a PLC connected via TCP/IP, includes simulation of signal states in I/O modules. • Up to 5 programming units can be connected to the simulated Quantum at the same time (via a TCP/IP Ethernet connection). • This simulator is only available under Windows 95/98 and Windows NT.

  17. Concept V2.5 • The 16 Bit Simulator File Location

  18. Concept V2.5 • The 32 Bit Simulator File Location

  19. Concept V2.5 • The 16 Bit Simulator

  20. Simulators • Starting the 32 Bit Simulator

  21. Concept V2.5 • 32 Bit Simulator Initial Quantum Startup • Nothing in Memory

  22. Concept V2.5 • Connect to IEC Simulator(32 Bit) • From IEC Simulator: Select required CPU type • Download configuration and program Select CPU Type

  23. Concept V2.5 • Components of PLCSIM32 CPU Status Select CPU Type Left Mouse Button: Select 16 bit input group Left Mouse Button: Select 16 bit output group Left Mouse Button: Change values of Input, Output, Register addresses Left Mouse Button: Select register address Right Mouse Button: Select value range, format

  24. Concept V2.5 • More Components of PLCSIM32 Left Mouse Button: Change values Right Mouse Button: Change format

  25. Configuration Demonstration and Lab

More Related