1 / 17

2-1 The Multipurpose Bed

2-1 The Multipurpose Bed. BED-SATIONS Brett McNeill Marianne LeBlanc Alex Hinchey. Our Project. Development. Updated Website New Materials New Costs Finalized Building Plans Calculations Regulations AutoCADs. Materials. Sliding Telescopic Rails Cold-Finished (Rolled) Steel C-1018

grant
Télécharger la présentation

2-1 The Multipurpose Bed

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2-1 The Multipurpose Bed BED-SATIONS Brett McNeillMarianne LeBlancAlex Hinchey

  2. Our Project

  3. Development Updated Website New Materials New Costs Finalized Building Plans Calculations Regulations AutoCADs

  4. Materials Sliding Telescopic Rails Cold-Finished (Rolled) Steel C-1018 Joints Lumber Mattresses Bolts/Screws/Misc

  5. Materials: DTS-50 Telescopic GENERATOR SLIDE • - Made from cold rolled steel C45E+C • - Maximum load capacity: 150-410 kg • Desired distance: 2ft = 609.6mm • $69/kit http://gsfslides.com/en/products/slide-selector-results-details.asp?productid=120&productname=15.5030+DTS-50+Telescopic+GENERATOR+SLIDE Dimensions in mm

  6. Materials: Cold Rolled Steel C-1018 • Cold rolling increases the strength and hardness- Carbon steel with 0.18% carbon • Tensile Strength: 64,000 psi- Yield Point: 54,000 psi • Using Circular bars, 1” diameter- $10.62/ft- Need four bars of 67” in length http://www.metalsupermarkets.com/STEEL-COLDROLLED-GUIDE

  7. Materials: Joints &90 Degree Swivel - For the joints connected to the rails. Connects to the rail Steel bars - 90 degree swivel - For the fixed rotating joints that are not connected to the rails.- Made out on E-Nickel

  8. Materials: Lumber - Variety of soft woods to chose from- Need 250ft http://www.fpl.fs.fed.us/documnts/pdf1994/winan94a.pdf

  9. Materials: Twin Spring Mattresses • Springs provide support for the body • Springs allow air to flow through the mattress increasing its life span- Reversible, use both sides for long-lasting- $99/ea http://www.ikea.com/ca/en/catalog/products/30156599/

  10. Costs Price to manufacture would be cheaper as would be in mass quantities

  11. Regulations: Guardrails & Ladder http://www.cpsc.gov/businfo/regsumbunkbed.pdf Bunk beds must have two upper bunk rails The gap for the ladder cannot be greater than 15 inches. Top guardrails must be no less than 5 inches above the top of the mattress A 9 inch diameter rigid sphere cannot pass through any openings

  12. Guardrails & Ladder Our guardrails and ladder are detachable from our upper bunk bed for when the beds are in their double form.

  13. Design

  14. Design: Sliding Out

  15. Design: Sliding Out

  16. Force Analysis: C1018 Bars Maximum load = 300kg = 662 lbs Maximum normal stress = 842 psi Material yield point = 54,000 psi Allowable load before buckling = 981 lbs Allowable normal stress before buckling = 1500 psi

  17. Thank-You

More Related