1 / 16

Andrew Hay Aerospace Engineering with German

Experimental investigations of the flow during the stage separation of a space transportation system. Andrew Hay Aerospace Engineering with German. Project Brief. The ELAC 1 and EOS configuration is a two-stage-to-orbit space transportation system

greg
Télécharger la présentation

Andrew Hay Aerospace Engineering with German

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Experimental investigations of the flow during the stage separation of a space transportation system Andrew Hay Aerospace Engineering with German

  2. Project Brief • The ELAC 1 and EOS configuration is a two-stage-to-orbit space transportation system • Stage separation occurs at Mach number Ma = 6.8 and at an altitude of 31 km • Flow visualisation - Oil flow pattern and colour Schlieren photography • Static wall pressure measurement • Identify aerodynamic interaction effects

  3. Experimental Set-Up • 40cm x 40cm “Trisonic” Wind Tunnel • 1:150 scale EOS upper stage model and flat plate to simulate ELAC 1 lower stage • Test Parameters: • Freestream Mach number (Ma = 2.0 to 2.2) • Relative angle of attack (Δα = -5° to +10 °)

  4. Test Geometry • Relative separation distance also planned but not possible

  5. Flow Visualisation • Oil flow pattern - to visualise the near surface flow.Emulsion of oil and pigments move along wall shear stress flow lines. • Colour Schlieren photography - to visualise the shock system. Density gradients are made visible, because refraction index changes with density. Pressure Measurement • Pressure coefficient Cp calculated from difference between static wall pressure p and ambient pressure p0.

  6. Oil Flow Pattern • EOS bow shock impingement line on flat plate is visible • No shock induced boundary layer separation is visible • Reflected shock impingement line is not visible on EOS model

  7. Colour Schlieren • Observed shock system very weak • Shock geometry used with shock theory to calculate flow conditions • Disturbances from flat plate very visible

  8. Pressure Measurement • Shock impingement points visible (pressure increase) • Overall trend is a decrease in pressure downstream • Reason - 3D effects of the closed wind tunnel test section

  9. Results Discussion • No boundary layer separation observed - confirmed by Schlieren and comparison with experimental data. • Shock systems very weak - shock intensities very close to 1 • 3D effects of test section have a stronger influence on the pressure results than the shock system • Comparison of testing methods:All test methods consistent in providing location of shock impingement points. Schlieren is best for visualising system.

  10. Conclusions • Shock systems visible, but very weak at tested Mach numbers • No shock induced boundary layer separation observed • 3D effects of the closed test section had a significant influence on the results • Improved test set-up is required to enable testing at more parameter variables

  11. Experimental investigations of the flow during the stage separation of a space transportation system Andrew Hay Aerospace Engineering with German

  12. Shock Theory

  13. Shock induced BL Separation

  14. Shock Reflection

  15. Colour Schlierem Photo Ma = 2.0  = +5° h = 40mm

  16. Static Wall Pressure Measurement Ma = 2.0  = +5° h = 40mm

More Related