1 / 41

CCNA2

CCNA2

guest105298
Télécharger la présentation

CCNA2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to Routing and Packet Forwarding Routing Protocols and Concepts – Chapter 1

  2. Objectives • Identify a router as a computer with an OS and hardware designed for the routing process. • Demonstrate the ability to configure devices and apply addresses. • Describe the structure of a routing table. • Describe how a router determines a path and switches packets

  3. Router as a Computer • Describe the basic purpose of a router • -Computers that specialize in sending packets over the data network. They are responsible for interconnecting networks by selecting the best path for a packet to travel and forwarding packets to their destination • Routers are the network center • -Routers generally have 2 connections: • -WAN connection (Connection to ISP) • -LAN connection

  4. Router as a Computer • Data is sent in form of packets between 2 end devices • Routers are used to direct packet to its destination

  5. Router as a Computer • Routers examine a packet’s destination IP address and determine the best path by enlisting the aid of a routing table

  6. Router as a Computer • Router components and their functions” • CPU - Executes operating system instructions • Random access memory (RAM) - Contains the running copy of configuration file. Stores routing table. RAM contents lost when power is off • Read-only memory (ROM) - Holds diagnostic software used when router is powered up. Stores the router’s bootstrap program. • Non-volatile RAM (NVRAM) - Stores startup configuration. This may include IP addresses (Routing protocol, Hostname of router) • Flash memory - Contains the operating system (Cisco IOS) • Interfaces - There exist multiple physical interfaces that are used to connect network. Examples of interface types: • -Ethernet / fast Ethernet interfaces • -Serial interfaces • -Management interfaces

  7. Router as a Computer • Router components

  8. Router as a Computer • Major phases to the router boot-up process • Test router hardware • Power-On Self Test (POST) • Execute bootstrap loader • Locate & load Cisco IOS software • -Locate IOS • -Load IOS • Locate & load startup configuration file or enter setup mode • -Bootstrap program looks for configuration file

  9. Router as a Computer • Verify the router boot-up process: • -The show version command is used to view information about the router during the bootup process. Information includes: • Platform model number • Image name & IOS version • Bootstrap version stored in ROM • Image file name & where it was loaded from • Number & type of interfaces • Amount of NVRAM • Amount of flash • Configuration register

  10. Router as a Computer

  11. Router as a Computer • Router Interface is a physical connector that enables a router to send or receive packets • Each interface connects to a separate network • Consist of socket or jack found on the outside of a router • Types of router interfaces: • -Ethernet • -Fastethernet • -Serial • -DSL • -ISDN • -Cable

  12. Router as a Computer • Two major groups of Router Interfaces • LAN Interfaces: • Are used to connect router to LAN network • Has a layer 2 MAC address • Can be assigned a Layer 3 IP address • Usually consist of an RJ-45 jack • WAN Interfaces • Are used to connect routers to external networks that interconnect LANs. • Depending on the WAN technology, a layer 2 address may be used. • Uses a layer 3 IP address

  13. Router as a Computer • Routers and the Network Layer • Routers use destination IP address to forward packets • The path a packet takes is determined after a router consults information in the routing table. • After router determines the best path • Packet is encapsulated into a frame • Frame is then placed on network medium in form of Bits

  14. Router as a Computer • Routers Operate at Layers 1, 2 & 3 • Router receives a stream of encoded bits • Bits are decoded and passed to layer 2 • Router de-encapsulates the frame • Remaining packet passed up to layer 3 -Routing decision made at this layer by examining destination IP address • Packet is then re-encapsulated & sent out outbound interface

  15. Configure Devices and Apply Addresses • Implementing Basic Addressing Schemes • When designing a new network or mapping an existing network you must provide the following information in the form of a document: • -Topology drawing that Illustrates physical connectivity • Address table that provides the following information: • Device name • Interfaces used • IP addresses • Default gateway

  16. Configure Devices and Apply Addresses • Basic Router Configuration • A basic router configuration should contain the following: • -Router name - Host name should be unique • -Banner - At a minimum, banner should warn against unauthorized use • -Passwords - Use strong passwords • -Interface configurations - Specify interface type, IP address and subnet mask. Describe purpose of interface. Issue no shutdown command. If DCE serial interface issue clock rate command. • After entering in the basic configuration the following tasks should be completed • -Verify basic configuration and router operations. • -Save the changes on a router

  17. Configure Devices and Apply Addresses

  18. Configure Devices and Apply Addresses • Verify Basic Router Configuration • -Issue the show running-config command • -Save the basic router configuration by Issuing the copy running-config startup-config command • -Additional commands that will enable you to further verify router configuration are: • Show running-config - Displays configuration currently in RAM • Show startup-config - Displays configuration file NVRAM • Show IP route - Displays routing table • Show interfaces - Displays all interface configurations • Show IP int brief - Displays abbreviated interface configuration information

  19. Routing Table Structure • Routing Table is stored in ram and contains information about: • Directly connected networks - this occurs when a device is connected to another router interface • Remotely connected networks - this is a network that is not directly connected to a particular router • Detailed information about the networks include source of information, network address & subnet mask, and Ip address of next-hop router • Show ip route command is used to view a routing table

  20. Routing Table Structure • Adding a connected network to the routing table • -Router interfaces • Each router interface is a member of a differentnetwork • Activated using the no shutdown command • In order for static and dynamic routes to exist in routing table you must have directly connected networks

  21. Routing Table Structure • Static routes in the routing table • -Includes: network address and subnet mask and IP address of next hop router or exit interface • -Denoted with the code Sin the routing table • -Routing tables must contain directly connected networks used to connect remote networks before static or dynamic routing can be used • When to use static routes • -When network only consists of a few routers • -Network is connected to internet only through one ISP • -Hub & spoke topology is used on a large network

  22. Routing Table Structure • Connected and Static routes

  23. Routing Table Structure • Dynamic routing protocols • -Used to add remote networks to a routing table • -Are used to discover networks • -Are used to update and maintain routing tables • Automatic network discovery • -Routers are able discover new networks by sharing routing table information

  24. Routing Table Structure • Maintaining routing tables • -Dynamic routing protocols are used to share routing information with other router & to maintain and up date their own routing table. • IP routing protocols. Example of routing protocols include: • -RIP • -IGRP • -EIGRP • -OSPF

  25. Routing Table Structure • Routing Table Principles • -3 principles regarding routing tables: • Every router makes its decisions alone, based on the information it has in its routing table. • Different routing table may contain different information • A routing table can tell how to get to a destination but not how to get back

  26. Routing Table Structure • Effects of the 3 Routing Table Principles • -Packets are forwarded through the network from one router to another, on a hop by hop basis. • -Packets can take path “X” to a destination but return via path “Y” (Asymmetric routing).

  27. Router Paths and Packet Switching • Internet Protocol (IP) packet format contains fields that provide information about the packet and the sending and receiving hosts • Fields that are importance for CCNA students: • -Destination IP address • -Source IP address • -Version & TTL • -IP header length • -Precedence & type of service • -Packet length

  28. Router Paths and Packet Switching • MAC Layer Frame Format • MAC Frames are also divided into fields. They include: • -Preamble • -Start of frame delimiter • -Destination MAC address • -Source MAC address • -Type/length • -Data and pad • -Frame check sequence

  29. Router Paths and Packet Switching • A Metric is a numerical value used by routing protocols help determine the best path to a destination • The smaller the metric value the better the path • 2 types of metrics used by routing protocols are: • -Hop count - this is the number of routers a packet must travel through to get to its destination • -Bandwidth - this is the “speed” of a link also known as the data capacity of a link

  30. Router Paths and Packet Switching • Equal cost metric is a condition where a router has multiple paths to the same destination that all have the same metric • To solve this dilemma, a router will useEqual Cost Load Balancing. This means the router sends packets over the multiple exit interfaces listed in the routing table.

  31. Router Paths and Packet Switching • Path determination is a process used by a router to pick the best path to a destination • One of 3 path determinations results from searching for the best path • Directly connected network • Remote network • No route determined

  32. Router Paths and Packet Switching • Switching Function of Router is the process used by a router to switch a packet from an incoming interface to an outgoing interface on the same router. • -A packet received by a router will do the following: • Strips off layer 2 headers. • Examines destination IP address located in Layer 3 header to find best route to destination. • Re-encapsulates layer 3 packet into layer 2 frame. • Forwards frame out exit interface.

  33. Router Paths and Packet Switching • As a packet travels from one networking device to another • -The Source and Destination IP addressesNEVER change • -The Source & Destination MAC addresses CHANGE as packet is forwarded from one router to the next. • -TTL field decrement by one until a value of zero is reached at which point router discards packet (prevents packets from endlessly traversing the network)

  34. Router Paths and Packet Switching • Path determination and switching function details. PC1 Wants to send something to PC 2 here is part of what happens • Step 1 - PC1 encapsulates packet into a frame. Frame contains R1’s destination MAC address

  35. Router Paths and Packet Switching • Step 2 - R1 receives Ethernet frame. • R1 sees that destination MAC address matches its own MAC. • R1 then strips off Ethernet frame. • R1 Examines destination IP. • R1 consults routing table looking for destination IP. • After finding destination IP in routing table, R1 now looks up next hop IP address. • R1 re-encapsulates IP packet with a new Ethernet frame. • R1 forwards Ethernet packet out Fa0/1 interface.

  36. Router Paths and Packet Switching

  37. Router Paths and Packet Switching • Path determination and switching function details. PC1 Wants to send something to PC 2 here is part of what happens • Step 3 - Packet arrives at R2 • R2 receives Ethernet frame • R2 sees that destination MAC address matches its own MAC • R2 then strips off Ethernet frame • R2 Examines destination IP • R2 consults routing table looking for destination IP • After finding destination IP in routing table, R2 now looks up next hop IP address • R2 re-encapsulates IP packet with a new data link frame • R2 forwards Ethernet packet out S0/0 interface

  38. Router Paths and Packet Switching • Path determination and switching function details. PC1 Wants to send something to PC 2 here is part of what happens • Step 4 - Packet arrives at R3 • R3 receives PPP frame • R3 then strips off PPP frame • R3 Examines destination IP • R3 consults routing table looking for destination IP • After finding destination IP in routing table, R3 is directly connected to destination via its fast Ethernet interface • R3 re-encapsulates IP packet with a new Ethernet frame • R3 forwards Ethernet packet out Fa0/0 interface • Step 5 - IP packet arrives at PC2. Frame is decapsulated & processed by upper layer protocols.

  39. Summary • Routers are computers that specialize in sending data over a network. • Routers are composed of: • -Hardware i.e. CPU, Memory, System bus, Interfaces • -Software used to direct the routing process • IOS • Configuration file • Routers need to be configured. Basic configuration consists of: • -Router name • -Router banner • -Password(s) • -Interface configurations i.e. IP address and subnet mask • Routing tables contain the following information • -Directly connected networks • -Remotely connected networks • -Network addresses and subnet masks • -IP address of next hop address

  40. Summary • Routers determine a packets path to its destination by doing the following • Receiving an encapsulated frame & examining destination MAC address. • If the MAC address matches then Frame is de-encapsulated so that router can examine the destination IP address. • If destination IP address is in routing table or there is a static route then Router determines next hop IP address. Router will re-encapsulate packet with appropriate layer 2 frame and send it out to next destination. • Process continues until packet reaches destination. • Note - only the MAC addresses will change the source and destination IP addresses do not change.

More Related