1 / 17

Electronic Engineering Department Universitat Politècnica de Catalunya

Fast Electrical Impedance Spectroscopy measurement techniques for dynamic bioimpedance characterization. Ph.D. Student: B.Sánchez Thesis Advisor: R.Bragós. Electronic Engineering Department Universitat Politècnica de Catalunya. Contents. 1.- Introduction 2.- Motivation

gwendolyn-hoffman
Télécharger la présentation

Electronic Engineering Department Universitat Politècnica de Catalunya

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fast Electrical Impedance Spectroscopy measurement techniques for dynamicbioimpedance characterization.Ph.D. Student: B.SánchezThesis Advisor: R.Bragós Electronic Engineering Department Universitat Politècnica de Catalunya

  2. Contents 1.- Introduction 2.- Motivation 3.- Multitone Burst Signal 4.- Results 5.- Conclusions

  3. Introduction Linear Time Invariant system: Impedance Transfer Function Laplace/Fourier Transform 1

  4. Ro |Z| R 8 f fc Introduction Biologicalsystems: Bioimpedance EquivalentCircuit Cellmembrane Extracellularmatrix LF HF 2

  5. Introduction Ex-vivo tissuecharacterization: 3

  6. Introduction In-vitro staticcellculturegrowthcharacterization: 4

  7. Motivation Challenge (I): In-vitro myocites cell culture growing characterization for tissue engineering applications Link video 5

  8. Motivation Challenge (II): In-vivo myocitespatchmonitoring and characterization: 6

  9. Multitone Burst Signals Time domain: 7

  10. Multitone Burst Signals Frequency domain: 8

  11. Multitone Burst Signals Crest Factor: Schroeder: Newman: Genetic Algorithm: 9

  12. Multitone Burst Signals Frequency Plan: Avoid intermodulation products: shift original tones for BW guard. 10

  13. Multitone Burst Signals Multitone bursts with Bilateral Quasi Logarithmic Frequency Distribution: 11

  14. Results Measurement Hardware Setup: • Custom FPGA based arbitrary signal generator. • DAC 12bits, 16Msamples, 40Ms/s, 1st order hold. • Ethernet capable controller. • PXI solution • PXI-5422: AWG, 200Ms/s, 32MB,16 bits. • PXIe-5122: AD 2channels, 100Ms/s, 64MB/channel, 14bits. • PXI-2530: multiplexation matrix, 128 channels. 12

  15. Results Yeast cell suspension settlement characterization: Estimation of the Growth Cell Curve 13

  16. Conclusions • Non invasive and non destructive technique for passive electrical properties charaterization of biological materials. • Valid measurement method for cell growth estimator and suitable for dynamic biological materials and systems characterization. • Wide application areas: electroporation, tomography, cell counting in microfludic, biosensors, tissue engineering,.. • The final application field is the cardiac tissue characterization in regenerative medicine applications. 14

  17. Fast Electrical Impedance Spectroscopy measurement techniques for dynamicbioimpedance characterization.Ph.D. Student: B.SánchezThesis Advisor: R.Bragós Electronic Engineering Department Universitat Politècnica de Catalunya

More Related