1 / 33

Shallow Foundations Bearing Capacity

Shallow Foundations Bearing Capacity. The problems of soil mechanics can be divided into two principal groups - stability problems and elasticity problems - Karl Terzaghi, 1943. Karl Terzaghi (1883-1963). Father of modern soil mechanics Born in Prague, Czechoslovakia

hansel
Télécharger la présentation

Shallow Foundations Bearing Capacity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Shallow Foundations Bearing Capacity • The problems of soil mechanics can be divided into two principal groups - stability problems and elasticity problems - Karl Terzaghi, 1943

  2. Karl Terzaghi (1883-1963) • Father of modern soil mechanics • Born in Prague, Czechoslovakia • Wrote “Erdbaumechanick” in 1925 • Taught at MIT (1925-1929) • Taught at Harvard (1938 and after)

  3. Karl Terzaghi at Harvard, 1940

  4. Bearing Capacity Failure

  5. Transcosna Grain Elevator Canada (Oct. 18, 1913) West side of foundation sank 24-ft

  6. Stability ProblemBearing Capacity Failure • Chapter 6. Bearing Capacity Analysis • How do we estimate the maximum bearing pressure that the soil can withstand before failure occurs?

  7. Bearing Capacity Failures Types/Modes of Failure • general shear failure • local shear failure • punching shear failure

  8. General Shear Failure

  9. Punching Shear Failure

  10. Model Tests by Vesic (1973)

  11. General Guidelines • Footings in clays - general shear • Footings in Dense sands ( > 67%) -general shear • Footings in Loose to Medium dense (30%< < 67%) - Local Shear • Footings in Very Loose Sand ( < 30%)- punching shear

  12. Bearing Capacity Formulas

  13. Terzaghi Bearing Capacity Formulas

  14. Terzaghi Bearing Capacity Formulas For Continuous foundations: For Square foundations: For Circular foundations:

  15. Terzaghi Bearing Capacity Factors

  16. Bearing Capacity Factors

  17. Terzaghi Bearing Capacity Formulas • D  B • No sliding between footing and soil • soil: a homogeneous semi-infinite mass • general shear failure • footing is very rigid compared to soil

  18. See Extra Handout Further Developments • Skempton (1951) • Meyerhof (1953) • Brinch Hanson (1961) • De Beer and Ladanyi (1961) • Meyerhof (1963) • Brinch Hanson (1970) • Vesic (1973, 1975)

  19. Vesic (1973, 1975) Formulas Shape factors….… Eq. 6.14, 6.15 and 6.16 Depth Factors ……. Eq. 6.17, 6.18 and 6.19 Load Inclination Factors …. Eq. 6.20, 6.21 and 6.22 Base Inclinations factors .. Eq. 6.25 and 6.26 Ground Inclination Factors…. Eq. 6.27 and 6.28 Bearing Capacity Factors …. Eq. 6.29, 6.30 and 6.31

  20. Vesic Formula Shape Factors

  21. Vesic Formula Depth Factors

  22. Bearing Capacity of Shallow Foundations • 6.3 Groundwater Effects • 6.4 Allowable Bearing Capacity • 6.5 Selection of Soil Strength Parameters • 6.6 Local & Punching Shear Cases • 6.7 Bearing Capacity on Layered Soils • 6.8 Accuracy of Bearing Capacity Analyses • 6.9 Bearing Capacity Spreadsheet

  23. Groundwater Table Effect

  24. Groundwater Table Effect; Case I • Modify′zD • Calculate ′ as follows:

  25. Groundwater Table Effect; Case II • No change in′zD • Calculate ′ as follows:

  26. Groundwater Table Effect; Case III • No change in′zD • No change in ′

  27. Allowable Bearing Capacity • ….. Allowable Bearing Capacity • F…. Factor of safety

  28. Factor of Safety Depends on: • Type of soil • Level of Uncertainty in Soil Strength • Importance of structure and consequences of failure • Likelihood of design load occurrence

  29. Minimum Factor of Safety

  30. Selection of Soil Strength Parameters • Use Saturated Strength Parameters • Use Undrained Strength in clays (Su) • Use Drained Strength in sands, • Intermediate soils that where partially drained conditions exist, engineers have varying opinions; Undrained Strength can be used but it will be conservative!

  31. Accuracy of Bearing Capacity Analysis • In Clays …..Within 10% of true value (Bishop and Bjerrum, 1960) • Smaller footings in Sands…. Bearing capacity calculated were too conservative – but conservatism did not affect construction cost much • Large footings in Sands … Bearing capacity estimates were reasonable but design was controlled by settlement

  32. Accuracy; Bearing Capacity Analysis

  33. Bearing Capacity Spreadsheet • Can be downloaded from http://www.prenhall.com/coduto • See Appendix B (page 848) for further instructions

More Related