1 / 41

Bruno Scrosati

Lithium batteries: a look into the future. Bruno Scrosati. Department of Chemistry, University of Rome “Sapienza”. To fight the global warming a large diffusion in the road of low emission vehicles (HEVs) or no emission vehicles (EVs) is now mandatory.

hei
Télécharger la présentation

Bruno Scrosati

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lithium batteries: a look into the future. Bruno Scrosati Department of Chemistry, University of Rome “Sapienza”

  2. To fight the global warming a large diffusion in the road of low emission vehicles (HEVs) or no emission vehicles (EVs) is now mandatory

  3. Electrified Vehicle sales forecastfor Asia Pacific countries Source: The Korean Times

  4. Source: http://aspoitalia.blogspot.com/2011/02/gli-scenari-dellagenzia-internazionale.html

  5. Will it be a tank of lithium to drive our next car? Key requisite: availability of suitable energy storage, power sources Best candidates: lithium batteries

  6. Courtesy of Dr. Jürgen DeberitzCHEMETALL GmbH Where lithium is taking us?

  7. Li-ionbattery system: a scheme of operation Electrochemical Reactions • Cathode • Anode • Overall The present Li-ion batteries rely on intercalation chemistry! 7 (From: K. Xu, Encyclopedia of Power Sources, Elsevier, 2010)

  8. Lithium Batteries Although lithium batteries are established commercial products Further R&D is still required to improve their performance especially in terms of energy density to meet the HEV, PHEV, EV requirement Jumps in performance require the renewal of the present lithium ion battery chemistry, this involving all the components, i.e., anode, cathode and electrolyte

  9. THE ENERGY ISSUE Energy Density (Wh/kg)  EV driving range (km) Middle size car (about 1,100 kg)  using presently available lithium batteries (150 Wh/kg)  driving 250 km with a single charge   200 kg batteries Enhancement of about 2-3 times in energy density is needed!

  10. Electric Vehicle Applications- The energy issue Estimated progress of the conventional Lithium-Ion Technology in terms of battery weight in EVs 200 Wh/kg* 170 Wh/kg* 200kg 140 kg 140 Wh/kg* Li-ion Batteries Near future Present Modified by courtesy of Dr. Stefano Passerini, Munster University, Germany

  11. Midterm evolution of the lithium ion battery technology Some examples of new-concept batteries developed our laboratory.

  12. Main goal: complete the development of the battery starting from a further optimization of the electrode and electrolyte materials, to continue with their scaling up to large quantities and then on their utilization for the fabrication and test of high capacity battery cells, to end with the definition and application of their recycling process. Collaborative participation of nine partners. Consorzio Sapienza Innovazione (CSI), Italy, managing coordinator HydroEco Center at Sapienza including Dept Chemistry (scientific coordinator) , Dept Physics, Universities Camerino and Chieti; Chalmers University of Technology Chemetall Ente Nazionale Idrocarburi ENI SpA Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW) SAES Getters SpA ETC Battery and Fuel Cells Sweden AB Stena Metall AB.

  13. TheAPPLESSnC/ GPE / LiNi0.5Mn1.5O4 lithium ion polymer battery anode GPE cathode http://www.applesproject.eu

  14. 1 μm The Li[Ni0.45Co0.1Mn1.45]O4 / SnC lithium ion cell J.Hassoun, K-S. Lee, Y-K.Sun,B.Scrosati, JACS 133 (2011)3139

  15. The Li[Ni0.45Co0.1Mn1.45]O4 / SnC lithium ion battery Li[Ni0.45Co0.1Mn1.45]O4 + SnC  Li (1-x)[Ni0.45Co0.1Mn1.45]O4 + LixSnC Projected energy density: 170 Wh/kg

  16. Li4Ti5O12 / Li[Ni0.45Co0.1Mn1.45]O4 lithium ion battery H-Gi Jung, M. W. Jang, J. Hassoun, Y-K. Sun, B. Scrosati, Nature Communications, 2 (2011) 516

  17. Li4Ti5O12 / Li[Ni0.45Co0.1Mn1.45]O4 lithium ion battery Li4Ti5O12 + Li[Ni0.45Co0.1Mn1.45]O4 Li4+xTi5O12 + Li (1-x) [Ni0.45Co0.1Mn1.45]O4 Projected energy density: 200 Wh/kg

  18. Electric Vehicle Applications- The energy issue Revolutionary Technology-Change Super- Battery < 100kg >500 Wh/kg 200 Wh/kg* Estimated limit of Lithium-Ion Technology 170 Wh/kg* 250 kg 140 kg 140 Wh/kg* Li-ion Batteries Present 2012 2017 Modified by courtesy of Dr. Stefano Passerini, Munster University, Germany Year

  19. Cathode side: Li Metal Chemistries Where should we go ? 6 Li-Ion Oxide Cathodes F2 Lithium-Element Battery Cathodes 5 Potential vs. Li/Li+ "4V" 4 O2 (Li2O2) O2 (Li2O) 3 Intercalation chemistry S 2 Carbon anodes Li metal 1 0 4000 0 3750 1250 250 500 1000 1500 1750 750 Modified by courtesy of Dr. Stefano Passerini, Munster University, Germany Capacity / Ah kg-1

  20. The lithium-sulfur battery < Theoretical capacity of lithium polysulfides > Anode Cathode Anodic rxn.: 2Li → 2Li+ + 2e- Cathodic rxn.: S + 2e - → S2- Overall rxn.: 2Li + S → Li2S, ΔG = - 439.084kJ/mol OCV: 2.23V Theoretical capacity : 1675mAh/g-sulfur e- e- Li2S8 : 209 mAh/g-S, Li2S4 : 418 mAh/g-S Li2S2 : 840 mAh/g-S, Li2S : 1675 mAh/g-S Cobalt: 42,000 US$/ton Sulfur: 30 US$/ton Li+ + S Li+ Li+ Li+ • Electrolyte • (polymer or liquid) Li2S Li S8 Li2S8 Charge process Li2S6 Discharge process Li2S4 Li2S2 Li2S Lithium Sulfur B. Scrosati, J. Hassoun, Y-K Sun, Energy & Environmental Science, 2011

  21. The lithium-sulfur battery Major Issues: solubility of the polysulphides LixSy in the electrolyte (loss of active mass  low utilization of the sulphur cathode and in severe capacity decay upon cycling) low electronic conductivity of S , Li2S and intermediate Li-S products (low rate capability, isolated active material)  Reactivity of the lithium metal anode (dendrite deposition, cell shorting, safety)

  22. The lithium-sulfur battery Sleeping for long time……. booming in the most recent years………… Ji, X., Lee, K.T., Nazar, L.F., Nat. Mater 8, 500 (2009) Lai, C. Gao, X.P., Zhang, B., Yan, T.Y., Zhou, Z J. Phys. Chem. C 113, 4712 (2009). Ji, X., L.F. Nazar, J. Mat. Chem, ., 20, 9821 (2010) Ji, X., S. Ever, R. Black, L.F. Nazar, Nat. Comm., 2, 325 (2011) N. Jayprakash,J. Shen, S.S. Morganty, A. Corona, L.A. Archer, Angew. Chemie Intern. Ed. 50, 5904 (2011) E.J. Cairns et al, JACS, doi.org/10.1021/ja206955k and others ……. however mainly focused on the optimization of the sulfur cathode still keeping Li metal anode

  23. Our approach: SnC nanocomposite / gel electrolyte/ Li2S-C cathodesulfur lithium-ion polymer battery ANODE Conventional :Li metal  our work : Sn-C nanocomposite (gain in reliability and in cycle life) ELECTROLYTE Conventional : liquid organic  our work : gel-polymer membrane (gain in safety and cell fabrication) CATHODE Conventional : sulfur-carbon  our work : C- Li2S composite Conventional : liquid organic (Li-metal-free battery ) (Li metal battery) Jusef Hassoun and Bruno Scrosati, Angew. Chem. Int. Ed. 2010, 49, 2371

  24. SnC/ Li2S lithium ion battery J. Hassoun & B. Scrosati, Angew. Chem. Int. Ed. 2010, 49, 2371

  25. THE CATHODE In situ XRD analysis run on a Li/CGPE/Li2S cell at various stages of the Li2S → S+ 2Li charge process. Potentiodynamic Cycling with Galvanostatic Acceleration, PGCA, response in the CPGE. Li counter and reference electrode. Room temperature. Anode peak area = cathode peak area (integration) Reversibility of the overall electrochemical reaction! Jusef Hassoun, Yang-Kook Sun and Bruno Scrosati, J. Power Sources, 196 (2011) 343

  26. SnC/ Li2S lithium ion polymer battery SnC+ 2.2Li2S  Li4.4SnC+ 2.2S Projected energy density: 400 Wh/kg Safety

  27. The kinetics issue Capacity decay upon rate increase. Slow kinetics! Some Li2S particles remain uncoated by carbon Optimization of the cathode material morphology is needed. Work in progress in our laboratories

  28. Improved sulfur-based cathode morphology Hard carbon spherule-sulfur (HCS-S) electrode morphology, showing the homogeneous dispersion of the sulfur particles in the bulk and over the surface of the HCS particles. The top right image illustrates the sample morphology as derived from the SEM image (top left) and the EDX image (bottom right) in which the green spots represent the sulfur J.Hassoun, J. Kim, D-J. Lee, H.-Gi.Jung,S-M.Lee,Y-K.Sun, B. Scrosati, J.Power Sources, Doi:10.1016/jpowsour.2011.11.60 

  29. Improved sulfur-based cathode morphology Rate capability Cycling response room temperature 0  C J.Hassoun, J. Kim, D-J. Lee, H.-Gi.Jung,S-M.Lee,Y-K.Sun, B. Scrosati, J.Power Sources, Doi:10.1016/jpowsour.2011.11.60 

  30. LiSiC/ S-C lithium ion battery J.Hassoun, J. Kim, D-J. Lee, H.-Gi.Jung,S-M.Lee,Y-K.Sun, B. Scrosati, J.Power Sources, Doi:10.1016/jpowsour.2011.11.60 

  31. LiSiC/ S-C lithium ion battery Projected energy density: 400 Wh/kg

  32. The lithium-air battery. The ultimate dream Potential store 5-10 times more energy than today best systems Two battery versions under investigation Lithium-air battery with protected lithium metal anode and/or protected cathode (aqueous electrolyte) 2Li + ½ O2 + H2O 2LiOH Theor. energy density : 5,800 Wh/kg Lithium-air battery with unprotected lithium metal anode (non aqueous electrolyte) Li + ½ O2 ½ Li2O2 Theor. energy density : 11,420 Wh/kg Present Lithium Ion technology (C-LiCoO2: Theor energy density: 420 Wh/kg

  33. The lithium-air battery (organic electrolyte) Unprotected electrode design Organic electrolytes Remaining issues: high voltage hysteresis loop, limited cycle life, stability of the organic electrolytes, reactivity of the lithium metal anode….. Courtesy of Prof O.Yamamoto, Mie University, Japan

  34. Reaction mechanism Oxygen electrochemistry in the polymer electrolyte lithium cell at RT Li / Polymer electrolyte / SP,O2 cell study by PCGA • Y-C. Lu, Z. Xu, H.A. Gasteiger, S. Chen, K. Hamad-Schifferli, Y. Shao-Horn, 2010, JACS, 132, 12170-12171 • Y-C. Lu, H.A. Gasteiger, Y. Shao-Horn, Electrochem Solid State Lett , 2011, 14, A70-A74 Lithium superoxide formation Lithium peroxide formation Lithium oxide formation Very low charge -discharge hysteresis with efficiency approaching 90% ! J. Hassoun, F. Croce, M. Armand & B. Scrosati, Angew. Chem. Int. Ed., 2011, 50, 2999

  35. Oxygen electrochemistry in the polymer electrolyte lithium cell at RT Polymer electrolyte Electrolyte decomposition ! EC:DMC, LiPF6 P.G. Bruce et al., IMLB, Montreal, Canada, June 27-July 2, 2010 P.G. Bruce et al., ECS, Montreal, Canada, May 01-06, 2011 J. Hassoun, F. Croce, M. Armand & B. Scrosati, Angew. Chem. Int. Ed., 2011, 50, 2999

  36. Oxygen electrochemistry in the polymer electrolyte lithium cell at RT Reduction products Li / polymer electrolyte / SP,O2 galvanostatic discharge XRD of the SP electrode

  37. The last concern: are lithium metal reserves sufficient for allowing large electric vehicle production?

  38. Main Lithium Deposits

  39. B.Scrosati, Nature, 473 (2011) 448

  40. LAB-FCT Laboratory structure Principal investigator: Prof Stefania Panero Researchers: Jusef Hassoun Maria Assunta Navarra Priscilla Reale Post Docs: Sergio Brutti Inchul Hong Graduate students: average 3 Visitors : average 2 Master students : average 4 Total : average 15

  41. ACKNOWLEDGEMENT This work was in part performed within the 7th Framework European Project APPLES (Advanced, Performance, Polymer Lithium batteries for Electrochemical Storage )

More Related