1 / 15

End Station Personal Safety Shutter TSC Design Presentation

End Station Personal Safety Shutter TSC Design Presentation. ES PSS Assembly. Safety Requirements: Established OP 02-30. History - LBL Engineering note #10450. Different Versions: Proto Original Current - Rev. A (6mm.) - Rev. 1 (22mm.) - Rev. E (0.125”). ES PSS Assembly Design.

henry-roman
Télécharger la présentation

End Station Personal Safety Shutter TSC Design Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. End Station Personal Safety ShutterTSC Design Presentation

  2. ES PSS Assembly Safety Requirements: Established OP 02-30

  3. History - LBL Engineering note #10450 Different Versions: Proto Original Current - Rev. A (6mm.) - Rev. 1 (22mm.) - Rev. E (0.125”)

  4. ES PSS Assembly Design Primary design details: Critical dimensions remain same Design is retro-fitable New switches New switch actuation design New switch access design Meets OP 02-30 procedurecriteria

  5. New Switch Specification Switch Details: “924CE1-S3” Safety Rated High Cycle life Reputable Manufacturer Available

  6. ISO Views

  7. Upper and Lower Switch Actuation

  8. Back Side Access and Top View

  9. General Design Changes • Changes to address Tracking issues: • 1) Documentation via an engineering notes • #10450 - MDC Specific • #10457 - General PSS Assys at ALS • 2) New part number assigned, Old versions obsolete • 3) Shutters need tag for exterior indication • - Name (LBL ALS ES PSS Assy) • - Part number (200863-2002) • - Serial number (unique for ever unit) • 4) Print details • - Fabrication/ Assembly Procedure • - Bill of material / wire diagram • - Reference LBL Engineering note #10450

  10. Specific Mechanical Improvements • Changes to address fabrication and reliability issues: • Bellows leaks -> Usage 30K cycles vs. 100K cycles design • - MDC design changes to increase number of cycles • Limit Switch failures -> New switches and actuation design • Access to switches -> New door style access • Paddle thickness -> Specified as 0.125” minimum • - Changes design requires new assembly • Assembly inconsistencies -> MDC Procedure requirement added • Operational issues -> MDC Testing required. • - Electrical circuit verification. • - Cycle test – at least 100 cycles. • - Paddle thickness measured. • - Documentation to be provided.

  11. Misc. views of assembly

  12. Front Access View

  13. Old Switch Design Old design / issues: Switch not safety rated Low cycle life Improper actuation No adjustability Wire damage

  14. ES PSS Assembly Checklist To be completed after fabrication and delivered with each PSS assembly.

  15. ES PSS Assembly Safety Requirements: Established OP 02-30 Changes have not effected these requirements or have incorporated them.

More Related