1 / 28

M m on Cooling RINGBERG 21-25 July, 2003

M m on Cooling RINGBERG 21-25 July, 2003. Studies at Columbia University/Nevis Labs & MPI Raphael Galea, Allen Caldwell. How to reduce beam Emmittance by 10 6 ?  6D,N = 1.7 10 -10 (  m) 3. Why Muons, why Muon Collider? Muon Cooling, Ionization or Frictional Cooling

hilde
Télécharger la présentation

M m on Cooling RINGBERG 21-25 July, 2003

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mmon CoolingRINGBERG21-25 July, 2003 Studies at Columbia University/Nevis Labs & MPI Raphael Galea, Allen Caldwell How to reduce beam Emmittance by 106? 6D,N = 1.7 10-10 (m)3 • Why Muons, why Muon Collider? • Muon Cooling, Ionization or Frictional Cooling • Frictional Cooling with protons • Conclusions and future work

  2. Why a Muon Collider ? No synchrotron radiation problem (cf electron) P a (E/m)4 Can build a high energy circular accelerator. Collide point particles rather than complex objects P P Ringberg Workshop 21-25 July, 2003

  3. Dimensions of Some Colliders discussed Ringberg Workshop 21-25 July, 2003

  4. Why Cooling? • All Colliding beams have some cooling to reduce the large phase space of initial beam • RADIATIVE • lose the hot particles • STOCHASTIC • sample particles passing cooling system • correct to mean position • ELECTRON • principle of heat exchanger Ringberg Workshop 21-25 July, 2003

  5. From target, stored  = 40000 ee Ringberg Workshop 21-25 July, 2003

  6. HIGH ENERGY MUON COLLIDER PARAMETERS Ringberg Workshop 21-25 July, 2003

  7. p’s in red m’s in green Drift region for  decay  30 m P beam (few MW) Solenoidal Magnets: few T … 20 T Target Simplified emittance estimate: At end of drift, rms x,y,z approx 0.05,0.05,10 m Px,Py,Pz approx 50,50,100 MeV/c Normalized 6D emittance is product divided by (mmc)3 drift6D,N 1.7 10-4 (m)3 Emittance needed for Muon Collider collider6D,N 1.7 10-10(m)3 This reduction of 6 orders of magnitude must be done with reasonable efficiency ! Ringberg Workshop 21-25 July, 2003

  8. Some Difficulties • Muons decay, so are not readily available – need multi MW source. Large starting cost. • Muons decay, so time available for cooling, bunching, acceleration is very limited. Need to develop new techniques, technologies. • Large experimental backgrounds from muon decays (for a collider). Not the usual clean electron collider environment. • High energy colliders with high muon flux will face critical limitation from neutrino induced radiation. Ringberg Workshop 21-25 July, 2003

  9. Muon Cooling Muon Cooling is the signature challenge of a Muon Collider • Cooler beams would allow fewer muons for a given luminosity, thereby • Reducing the experimental background • Reducing the radiation from muon decays • Allowing for smaller apertures in machine elements, and so driving the cost down Ringberg Workshop 21-25 July, 2003

  10. Cooling Ideas : Ionization Cooling RF  beam B Gas cell Ionization cooling (Skrinsky, Neuffer, Palmer, …): muons are maintained at ca. 200 MeV. Transverse cooling of order x20 seems feasible (see -factory feasibility studies 1-2). Longitudinal cooling not solved. Ringberg Workshop 21-25 July, 2003

  11. Longitudinal Cooling via Emittance Exchange Transform longitudinal phase space into transverse (know how to cool transverse) Wedge shaped absorber Bent solenoid produces dispersion Ringberg Workshop 21-25 July, 2003

  12. ‘Balbekov Ring’ There are significant developments in achieving 6D phase space via ionization cooling (R. Palmer, MUTAC03), but still far from 106 cooling factor. Ringberg Workshop 21-25 July, 2003

  13. Ionization stops, muon too slow Frictional Cooling Nuclear scattering, excitation, charge exchange, ionization • Bring muons to a kinetic energy (T) where dE/dx increases with T • Constant E-field applied to muons resulting in equilibrium energy • Big issue – how to maintain efficiency • First studied by Kottmann et al., PSI 1/2 from ionization Ringberg Workshop 21-25 July, 2003

  14. Problems/comments: • large dE/dx @ low kinetic energy  low average density (gas) • Apply E  B to get below the dE/dx peak • m+has the problem of Muonium formation s(Mm) dominates over e-strippingin all gases except He • m-has the problem of Atomic capture s small below electron binding energy, but not known • Slow muons don’t go far before decaying d = 10 cm sqrt(T) T in eV so extract sideways (E  B ) Ringberg Workshop 21-25 July, 2003

  15. Trajectories in detailed simulation Transverse motion Motion controlled by B field Fluctuations in energy results in emittance Lorentz angle drift, with nuclear scattering Final stages of muon trajectory in gas cell Ringberg Workshop 21-25 July, 2003

  16. Results of simulations to this point Phase rotation sections Cooling cells • Full MARS target simulation, optimized for low energy muon yield: 2 GeV protons on Cu with proton beam transverse to solenoids (capture low energy pion cloud). • He gas is used for m+,H2 for m-. There is a nearly uniform 5T Bz field everywhere, and Ex =5 MeV/m in gas cell region • Electronic energy loss treated as continuous, individual nuclear scattering taken into account since these yield large angles. Not to scale !! Ringberg Workshop 21-25 July, 2003

  17. Yields & Emittance Results as of NUFACT02 Look at muons coming out of 11m cooling cell region after initial reacceleration. Yield: approx 0.002  per 2GeV proton after cooling cell. Need to improve yield by factor 3 or more. Emittance: rms x = 0.015 m y = 0.036 m z = 30 m ( actually ct) Px = 0.18 MeV Py = 0.18 MeV Pz = 4.0 MeV 6D,N = 5.7 10-11 (m)3 6D,N = 1.7 10-10 (m )3 Ringberg Workshop 21-25 July, 2003

  18. RAdiological Research Accelerator Facility • Perform TOF measurements with protons • 2 detectors START/STOP • Thin entrance/exit windows for a gas cell • Some density of He gas • Electric field to establish equilibrium energy • NO B field so low acceptance • Look for a bunching in time • Can we cool protons? Ringberg Workshop 21-25 July, 2003

  19.  4 MeV p Ringberg Workshop 21-25 July, 2003

  20. Contains O(10-100nm) window Accelerating grid Si detector To MCP Proton beam Gas cell Ringberg Workshop 21-25 July, 2003 Vacuum chamber

  21. Assumed initial conditions • 20nm C windows • 700KeV protons • 0.04atm He TOF=T0-(Tsi-TMCP) speed Kinetic energy

  22. Summary of Simulations • Incorporate scattering cross sections into the cooling program • Born Approx. for T>2KeV • Classical Scattering T<2KeV • Include m- capture cross section using calculations of Cohen (Phys. Rev. A. Vol 62 022512-1) • Difference in m+ & m- energy loss rates at dE/dx peak • Due to extra processes charge exchange • Barkas Effectparameterized data from Agnello et. al. (Phys. Rev. Lett. 74 (1995) 371) • Only used for the electronic part of dE/dx • Energy loss in thin windows • For RARAF setup proton transmitted energy spectrum is input from SRIM, simulating protons through Si detector • (J.F. Ziegler http://www.srim.org) Ringberg Workshop 21-25 July, 2003

  23. Cool protons??? MC exp Flat constant Background Background exponential with m>0 Ringberg Workshop 21-25 July, 2003

  24. Conclusions • No clear sign of cooling but this is expected from lack of Magnetic field & geometric MCP acceptance alone • The Monte Carlo simulation can provide a consistent picture under various experimental conditions • Can use the detailed simulations to evaluate Muon Collider based on frictional cooling performance with more confidence….still want to demonstrate the cooling • Work at MPI on further cooling demonstration experiment using an existing 5T Solenoid and develop the m- capture measurement A lot of interesting work and results to come. Ringberg Workshop 21-25 July, 2003

  25. Lab situated at MPI-WHI in Munich Ringberg Workshop 21-25 July, 2003

  26. Problems/Things to investigate… • Extraction of ms through window in gas cell • Must be very thin to pass low energy ms • Must be reasonably gas tight • Can we apply high electric fields in gas cell without breakdown (large number of free electrons, ions) ? Plasma generation  screening of field. • Reacceleration & bunch compression for injection into storage ring • The m- capture cross section depends very sensitively on kinetic energy & falls off sharply for kinetic energies greater than e- binding energy. NO DATA – simulations use theoretical calculation • +… Ringberg Workshop 21-25 July, 2003

  27. Future Plans • Frictional cooling tests at MPI with 5T Solenoid, alpha source • Study gas breakdown in high E,B fields • R&D on thin windows • Beam tests with muons to measure  capture cross section • -+H  H+ e+’s • muon initially captured in n=15 orbit, then cascades down to n=1. Transition n=2n=1 releases 2.2 KeV x-ray. Si drift detector Developed by MPI HLL Ringberg Workshop 21-25 July, 2003

  28. Summary of Frictional Cooling • Works below the Ionization Peak • Detailed simulations • Cooling factors O(106) or more? • Still unanswered questions being worked on but early results are encouraging. Proton cooling test Y(cm) Kinetic Energy(KeV) Time(ns) X(cm)

More Related