1 / 34

DRYING AND HEAT TRANSFER

DRYING AND HEAT TRANSFER. Yusron Sugiarto, STP, MP, MSc. DRYING PROCESSES. Drying is perhaps the oldest, most common and most diverse of chemical engineering unit operations .

hope
Télécharger la présentation

DRYING AND HEAT TRANSFER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DRYING AND HEAT TRANSFER Yusron Sugiarto, STP, MP, MSc

  2. DRYING PROCESSES • Drying is perhaps the oldest, most common and most diverse of chemical engineering unit operations. • Over four hundred types of dryers have been reported in the literature while over one hundred distinct types are commonly available. • Energy consumption in drying ranges from a low value of under five percent for the chemical process industries to thirty five percent for the papermaking operations.

  3. DRYING PROCESSES • Objective - removal of solvents • Contact solids with fluid not saturated with solvent • Economics • Recover solvent • Avoid shipping solvent • May avoid spoilage

  4. DRYING CURVE

  5. DRYING EQUIPMENT • CATEGORIES • BATCH OR CONTINUOUS • DRYING MECHANISM • THERMAL • VACUUM • FREEZING • MECHANICAL http://www.grecobrothers.com/centrifugal-dryers/K94.jpg http://www.arrowhead-dryers.com/steam-tube-dryers.html

  6. VACUUM DRYERS • SHELF ROTARY CONICAL http://www.mcgillairpressure.com/index.html

  7. SHELF DRYERS • Batch units • Circulate air past trays of fluids • Over (cross-circulation) • And/or perpendicular to (through-circulation) • Can operate under vacuum • Long batch cycles (4 - 48 hours) are common • Primary uses • Plastics • Metals • Chemicals • Pharmaceuticals • Foods http://www.bocedwards.com/index.cfm?ProcessVacuum/pharmaceutical-upgrades.cfm~content

  8. TUNNEL DRYERS • Move material on belt or conveyor through drying zone • Used for a wide range of free-flowing particulates (granular, flake or fibrous) • Used for pastes and filter cakes with even application to belt • Drying times approximately 5 - 120 minutes • Large capacity is practical with these units http://www.dryer.com/Columbia%20Flyer%2005%20.pdf

  9. ROTARY DRYERS • Drop solids through countercurrent flowing hot gases • Can be lined with refractory to allow very high temperature operation • High volume with wide stable operating range • Residence times typically measured in minutes http://www.siko.co.id/images/kiln.jpg

  10. DRUM AND WIPED-FILM DRYERS • Drum dryers • Thin film dryers with indirect heating • Slurry applied to drum and dried solid removed (see fig. 9.2-4) • Wiped film dryers • Inverse of drum dryer with internal wiper to apply film to vertical surface • Material leaving dryer must be free flowing • High thermal efficiency http://www.atlascoffee.com/imgz/1br/1br07.jpg

  11. FREEZE DRYERS • USED FOR BIOLOGICALS • USE SUBLIMATION http://www.niroinc.com/html/chemical/freezedryers.html http://www.pharmaceutical-technology.com/contractors/process_automation/telstar/telstar1.html

  12. FLASH OR SPRAY DRYERS • Contact flow with concurrent flow of hot air • Solids may be entrained • Solids may fall through air • May incorporate cyclone • May incorporate sprayer to produce slurry droplets • May be included on tall tower (prilling) operation http://www.oc-sd.co.jp/english/exampleusage/index01.html

  13. FLUID BED DRYERS • Suspend solids in hot air stream • Gentle processing – no degradation • Uniformity of process conditions • Fed slurry from a centrifuge • Recover fines with either cylcone, filter or esp and re-slurry http://www.niroinc.com/html/drying/fluidbed.html

  14. FLUID BED DRYER EXAMPLE http://www.barr-rosin.com/english/products/fluid-bed-dryer.htm

  15. Heat Transfer • Heat always moves from a warmer place to a cooler place. • Hot objects in a cooler room will cool to room temperature. • Cold objects in a warmer room will heat up to room temperature.

  16. Question • If a cup of coffee and a red popsickle were left on the table in this room what would happen to them? Why? The cup of coffee will cool until it reaches room temperature. The popsickle will melt and then the liquid will warm to room temperature.

  17. Basics to heat transfer • Heat (Q) = a form of energy [ J or Btu ] • (2) Rate of heat transfer (q) = amount of heat (J, Btu) • unit time (s ,hr) • *** (J/s = Watts) • (3) Nature of heat flow • “Net heat flow is always • in the direction of • temperature decrease”

  18. (4) Heat flux = rate of heat flow per unit area = q/A = Q [J/s m2] t X A (5) Temperature gradient = changes of temperature with distance, i.e. for x direction = dT/dx [°C/m]

  19. Heat Transfer Methods • Heat transfers in three ways: • Conduction • Convection • Radiation

  20. When you heat a metal strip at one end, the heat travels to the other end. Conduction As you heat the metal, the particles vibrate, these vibrations make the adjacent particles vibrate, and so on and so on, the vibrations are passed along the metal and so is the heat. We call this? Conduction

  21. Metals are different The outer e______ of metal atoms drift, and are free to move. lectrons When the metal is heated, this ‘sea of electrons’ gain k_____ energy and transfer it throughout the metal. inetic Insulators, such as w___ and p____, do not have this ‘sea of electrons’ which is why they do not conduct heat as well as metals. ood lastic

  22. Why does metal feel colder than wood, if they are both at the same temperature? Metal is a conductor, wood is an insulator. Metal conducts the heat away from your hands. Wood does not conduct the heat away from your hands as well as the metal, so the wood feels warmer than the metal.

  23. ……………… ( I ) * Heat Transfer by Conduction • If temperature gradient exists in a continuous substance (solid, fluid and gas), heat can flow without observable motion of matter. • Heat flux is oppositely proportional to the temperature gradient (Fourier’s law) where, q = rate of heat flow in direction normal to surface A = surface area T = temperature x = distance normal to surface k = proportionality constant or thermal conductivity

  24. Convection What happens to the particles in a liquid or a gas when you heat them? The particles spread out and become less dense. This effects fluid movement. What is a fluid? A liquid or gas.

  25. Fluid movement Cooler, more d____, fluids sink through w_____, less dense fluids. ense armer In effect, warmer liquids and gases r___ up. ise Cooler liquids and gases s___. ink

  26. Water movement Cools at the surface Convection current Hot water rises Cooler water sinks

  27. Why is it windy at the seaside?

  28. Cold air sinks Where is the freezer compartment put in a fridge? Freezer compartment It is warmer at the bottom, so this warmer air rises and a convection current is set up. It is put at the top, because cool air sinks, so it cools the food on the way down.

  29. wall Cold fluid q High Temperature * Heat Transfer by Convection • - Flow of heat associated with the movement of fluid • - Convective flux T (Newton’s law of cooling) • where, • Ts = surface temperature • Tf = bulk temperature of fluid, far from surface • h = heat-transfer coefficient ……………….. ( II )

  30. * Heat Transfer by Convection (next) **unlike k, h depends not only on thermal properties of fluid but also flow patterns** convection แบ่งออกเป็น 2 แบบ ดังนี้คือ - Force convection - Natural convection • Temperature gradient in fluid  buoyancy forces flow

  31. The third method of heat transfer How does heat energy get from the Sun to the Earth? There are no particles between the Sun and the Earth so it CANNOT travel by conduction or by convection. RADIATION ?

  32. Radiation Radiation travels in straight lines True/False Radiation can travel through a vacuum True/False Radiation requires particles to travel True/False Radiation travels at the speed of light True/False

  33. Dull metal Shiny black Shiny metal Dull black Absorption experiment Four containers were placed equidistant from a heater. Which container would have the warmest water after ten minutes? dull black The __________ container would be the warmest after ten minutes because its surface absorbs heat _______ the best. The _________ container would be the coolest because it is the poorest at __________ heat radiation. radiation shiny metal absorbing

  34. *Heat Transfer by Radiation • Transfer of energy through space by electromagnetic waves • Through empty space, energy not transformed nor diverted • Through matters, transmitted, reflected, or absorbed • Absorbed energy is in form of heat • Energy emitted by a black body (absolute temp.)4 • where, Wb = rate of radiant energy emission per unit /area  = Stefan-Boltzmann constant T = absolute temperature  = emissivity ……….. (III)

More Related