1 / 3

Main news

Main news. DAQ test bench running in Geneva 2 LDCs connected to 2 different PCs, 1 GDCs DAQ trigger distributed using MICE Trigger receiver (V977) Particle trigger given by scintillator signal discriminated by LS 4415 and using logic unit 4516 Network test with the Nortel 5510-24T switch

idalee
Télécharger la présentation

Main news

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Main news • DAQ test bench running in Geneva • 2 LDCs connected to 2 different PCs, 1 GDCs • DAQ trigger distributed using MICE Trigger receiver (V977) • Particle trigger given by scintillator signal discriminated by LS 4415 and using logic unit 4516 • Network test with the Nortel 5510-24T switch • Unpacking software progressing • EventDump code exists based on DATE distribution but in C++ • Decoding of TDC data is done • Shipping equipment to RAL • A first batch has been sent today 1 PC + monitor, 2 VME Crates, 1 NIM Crate, 1 Network switch ,1 VME-PCI interface and 1 Trigger receiver • The rest will be transported by car 1 PC, 1 NIM crate, VME boards, NIM boards • Shaper design reviewed and production started in Sofia • Splitter design reviewed and production started in Geneva Jean-Sébastien Graulich

  2. First GDC has been delivered 8 hot swap 500 GB disks 2 hot swap PS 2 Ethernet cards 3 TB of space in RAID 6 SLC4 Linux and DATE installed Has to be tested for disk access time It’s also heavy and noisy…

  3. DAQ Workshop • July 23-25 at RAL • Focus on Tracker readout control and data unpacking • There will be hands on training with DATE • How to install, configure, run, etc • Everybody is busy and has little time to write the agenda … Apologies • If interested, register to mailing list mice-dcm or visit http://indico.cern.ch/conferenceDisplay.py?confId=18417 Jean-Sébastien Graulich

More Related