1 / 27

SEED Down Hill Aerial Transportation Team Design Night Presentation May 4, 2011

SEED Down Hill Aerial Transportation Team Design Night Presentation May 4, 2011. Daniel Sturnick Chris Abbot-Koch Lance Nichols.

ilori
Télécharger la présentation

SEED Down Hill Aerial Transportation Team Design Night Presentation May 4, 2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SEEDDown Hill Aerial Transportation TeamDesign Night PresentationMay 4, 2011 Daniel Sturnick Chris Abbot-Koch Lance Nichols

  2. Our client Mr. Milson needs a safe and reliable means of transportation from his house to his pond. He is no longer able to access his pond under his own power. The pond is located roughly 245 feet in the linear direction and has a 200 foot vertical drop in elevation. There are obstacles such as wetland and rough terrain standing in the way as well. 245 ft

  3. SolutionCable Cart SystemLet’s take a minute to explore the design

  4. Design Process • Early Leading Design: Tracked Tramway • Pros: • Safety – one the ground • Reliability • Affordable • Cons: • Doesn’t account for change in elevation, can’t get all the way • High Maintenance • Design Change => Go over the change in elevation, get up in the air

  5. Design Process • Final Concept: Cable Cart Lift • Customizable • Direct Porch and Pond Landings • Through Cart Fit to Scooter • Engineerability • Design flexibility • Minimize Material Use • Maximize client unique experience while riding and aesthetic appeal

  6. Constructability • Lay out design over field: final measurements • Excavate for concrete: Locations for top/bottom/intermediate footers. • Form concrete  how to get concrete poured (portable mixer vs. chute) • Intermediate pole installation • Install/fix cables • Install drive/control system • Install cart on cables

  7. Design 1 • Length: 5’ • Width: 4’ • Height: 3’ • Door opens to be 29” • wide • Metal frame: 2” thick • Aluminum Square Stock Cart Designs

  8. Length: 4’ • Width: 3’(Handicap • accessible standard) • Height: 3’ • Collapsible front and rear door that turns into on/off ramp • Transparent sides and • bottom Design 2 Cart Designs

  9. Cart Designs Design 3 • 3’ x 4’ x 3’ design • Rollers set at pitch angle of 14o • Stabilizing Cable Rollers set 2’below cart • Transparent Walls and Floor. • Gate deploys into a loading/unloading ramp.

  10. ASME A17.1Safety Code for Elevators and Escalators

  11. Key Requirements for Private Residence Inclined Elevators: • Car must be enclosed on all sides to a height of 42 inches. • The inside net platform area may not exceed 15ft^2 • The fixed cables may not be less then 0.25 inches in diameter, while the hoist cables may not be less then 0.1875 inches in diameter with both having a factor of safety of 8. • The driving motor may not be mounted to the same structure as the fixed cable. • An emergency switch must be located on the car operating panel. • Hand rope operation shall not be used…

  12. Electric Motor With Worm-Gear Drive Mechanism • Large speed reduction ratio • Self-locking, the gear cannot reverse drive the worm • Good for low horsepower applications • Low cost • High output torque in a small package

  13. Electrical SystemsACH550 Practically Solves all of our electrical needs: Ramp Up/Ramp Down Speed Governor Forward/Stop/Reverse Can be connected right to a household circuit breaker.

  14. Electrical Systems • As the cart approaches the upper and lower landing docks, there will be a pair of limit or rocker switches. • As the cart rolls over the first switch, it will send a signal to the variable frequency drive (ACH550) to ramp down the motor. • As the cart rolls over the second switch, it will send a signal to the VFD to stop the motor.

  15. Human Perception of Vibrations There is a range of frequencies that are physically disturbing to the human body. 2.5-10 Hz Outside of these bounds, there is no disturbance to the human body.

  16. Tension Calculations The largest deflection will be when the dead and live load are in the middle of the track. Tension calculations had to be conducted at this point.

  17. Tension Calculations Frequency – F=  (2∏ F)2 m Stiffness – k =  δ =m/k Where: = Live load + Dead load = Deflection of cable at midpoint

  18. Tension Calculation β 2 By making a right triangle, we can solve for β 2 , since we know the angle the tension cable makes with a horizontal ( 14.47o ) β 2 = 180 – 90 – 14.47 = 75.53o Knowing β 2 , we also know µ1. µ1 = 180 – 75.53 = 104.47o µ1

  19. Tension Calculations • Known: δ ,C2, B1 α1 µ1 β 2 C2 B1 δ δ C1 B2 µ2 α2 β1 Lower Tension Angle (µ2 - 90) Upper Tension Angle (90 - µ1)

  20. Tension Calculations • Now knowing C1 , B2 , δ , µ1 , β 2 , we can apply the Law of Sines and Cosines to solve all remaining unknowns. C2= A2 + B2 – 2ABCos(c) Once the tension angles, α1 , α2, the tension can be found by the equation T =

  21. Footer Calculation L L/2 • Sum of the Forces in the X and Y direction and a sum of the moments about point O. T H3 Sf1 H1 Sf2 Point O H2 mg

  22. Footer Calculation Sum of the Forces in the X direction yields Tcos(14.47) – Sf1 – 2Sf2 = 0 Sum of the Forces in the Y direction yields Tsin(14.47) – mg = 0 Sum of the moments about point O yields Tsin(µ)*(3L/8) – Tcos(µ)*(h1 + h3/2) - Sf1 *(h1 / 2) -2Sf2 *(H2 / 2) - W ((2h2mgL + 6h2mgL + L2 h3 + 4hL2 ) / (8h1 L + 8h2 mg +4Lh3 ))

  23. Support Column Footer Calculations T Sum of the Forces in X and Y will give sufficient information to solve for footers. T Sf mg

  24. Safety Features • Emergency Break on Cart • Speed Governor Acts as an Additional Safety Break at motor • Safety Switch at Landings so motor can’t engage with gates open. • Back-up battery for power failure

  25. Future Steps • Get design out there is search of outside funding • Transfer design to Professional Engineer • Sign contractor to project • Install lift for David Millson to get back down to his pond

  26. Any Questions? A special thanks to Professor Eric Hernandez, our mentor on short notice, to David Boehm, with help from Engineering Ventures, and to the excellent clients, the Millson’s for their hospitality and the great design opportunity.

More Related