1 / 24

FMT Modulation for Wireless Communication

FMT Modulation for Wireless Communication. Santosh V Jadhav (Advisor: Prof V M Gadre). Multicarrier System:. Spectral partitioning: -s inc(f) overlapping (OFDM) -Non-overlapping (FMT) OFDM: FMT :. Spectral characteristics:OFDM. Spectral characteristics:FMT.

imaran
Télécharger la présentation

FMT Modulation for Wireless Communication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FMT Modulation for Wireless Communication Santosh V Jadhav (Advisor: Prof V M Gadre)

  2. Multicarrier System: Spectral partitioning: -sinc(f) overlapping (OFDM) -Non-overlapping (FMT) OFDM: FMT :

  3. Spectral characteristics:OFDM

  4. Spectral characteristics:FMT

  5. OFDM Communication System

  6. OFDM v/s FMT: OFDM: -perfect detection(zero ISI, zero ICI) under ideal channel and absence of noise. -simple equalization scheme with cyclic prefix -high spectral overlap. FMT: -nearly rectangular frequency-domain amplitude characteristic -High spectral containment, negligible ICI -The absence of the cyclic prefix, together with the reduced no of virtual carriers -Equalizer is required even under ideal channel condition and absence of noise

  7. Why to prefer FMT over OFDM? -Cyclic Extension in OFDM -> Loss of transmission efficiency -High spectral overlap in OFDM -> Frequency offset sensitivity -In OFDM side lobes are just 13dB lower than the main lobe -> Significant power leakage into adjacent band

  8. FMT System: Direct implementation

  9. Efficient implementation: DFT based FMT system - FMT Transmitter-

  10. Contd…FMT Receiver-

  11. Prototype Design: Prototype filter h(n) completely defines the system. Allows tradeoff between- - No. of subcarriers - Level of spectral containment - Complexity of implementation and latency Can be designed by any standard FIR filter design method. Typical design parameters are- - fcutoff : determines the ISI per subchannel - Stopband energy : determines ICI introduced by adjacent subchannels, so should as low as possible

  12. Contd…e.g. - Blackman Window =14, fcutoff = 0.3/T Hamming Window =14, fcutoff = 0.38/T

  13. Equalization in FMT System: Due to negligible ICI, each subchannel will be independent of adjacent channel(s) as shown - Simplified subchannel model is –

  14. Contd… Subchannel impulse response ( = 14): So, ISI and per subchannel equalization is must.

  15. Conventional Schemes and FMT specific equalizer design -Channel is equalized by one-tap equalizer -ISI due to transmit and receive filter need to be compensated. Linear equalizer DFE equalizer

  16. Contd… Here estimated error – Optimality criterias – - Zero forcing(ZF) - MMSE

  17. Simulation results with MMSE QPSK, M=64, =14:

  18. Contd… 8-PSK, TCM encoder, M=64, =14

  19. Problems with conventional method and solution Problems- The process of making hard decisions on the channel symbols actually destroys information pertaining to how likely each of the possible channel symbols might have been. Solution- 1. Additional soft information can be converted into probabilities that each of the received symbol takes on and can be exploited by a BER optimal decoding algorithm. 2. Let decoder generate its own soft information based on the soft information received from equalizer and use it in the process of equalization. So let soft information flow in both direction between decoder and equalizer for no of iteration -> Turbo Equalizer.

  20. Turbo FMT System Model:

  21. Contd… Turbo Equalizer- -Channel equalized by 1-tap filter -SISI equalizer neutralizes the effect of transmit and receive filters.

  22. Performance of Turbo equalization based schemes MMSE-DFE(BPSK, Hamming, =10):

  23. Contd… MMSE-LE(BPSK, Hamming, =10):

  24. Future Scope: -Turbo equalization based scheme to be extended to other higher order constellations (like QPSK, QAM) -Turbo equalizer for STBC-FMT -Multi-user detection in FMT Systems -Adapting the System if flat fading assumption fails

More Related