1 / 27

AEOLUS STATUS

AEOLUS STATUS. Part 1: Design Overview. Outline of the presentation. Introduction to ALADIN Laser transmitter (TXA) specification Overview on the Laser optical design Overview on the Laser thermo-mechanical design. ALADIN Measurement Geometry.

iniko
Télécharger la présentation

AEOLUS STATUS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AEOLUS STATUS Part 1: Design Overview Working Group on Space-based Lidar Winds

  2. Outline of the presentation • Introduction to ALADIN • Laser transmitter (TXA) specification • Overview on the Laser optical design • Overview on the Laser thermo-mechanical design Working Group on Space-based Lidar Winds

  3. ALADIN Measurement Geometry • Wind measured by Doppler shift of backscattered light • Single line-of-sight of horizontal wind (HLOS) • Sun-synchronous orbit • Random error: < 2 m/s • Zero wind bias < 0.4 m/s Working Group on Space-based Lidar Winds

  4. Doppler shift of backscattered light vs laser pulse Aerosols signal (Mie) predominant at low altitude (< 2kms) Molecules (Rayleigh) predominant at higher altitude (> 2 kms) ALADIN Measurement principle Working Group on Space-based Lidar Winds

  5. ALADIN Optical Functional Diagram RSP principle Working Group on Space-based Lidar Winds

  6. Receiver Equipments Detection Front-end Chopper T/R Optics Rayleigh Spectrometer Working Group on Space-based Lidar Winds

  7. ALADIN Instrument Overview Working Group on Space-based Lidar Winds

  8. Instrument Core Working Group on Space-based Lidar Winds

  9. The ALADIN laser Transmitter (TXA) Working Group on Space-based Lidar Winds

  10. The ALADIN Laser Transmitter (TXA) • The ALADIN Laser transmitter is a Nd:YAG Q-switched Master Oscillator Power Amplifier (MOPA), frequency tripled & Injection-seeded. • It operates in Continuous Mode with a PRF of 50 Hz • The injection-seeding principle is based on the Ramp-Hold-Fire Working Group on Space-based Lidar Winds

  11. The ALADIN TXA Functional Block Diagram Working Group on Space-based Lidar Winds

  12. Injection + Master Oscillator section Rod Polarizer Q-Switch 5 mJ IR energy 1 mm @ 1/e2 Working Group on Space-based Lidar Winds

  13. 2nd pass Output Energy 130 mJ Input Energy 5 mJ 3.4 mm @1/e2 3rd pass Output Energy 350 mJ (IR) 1st pass Output Energy ~50 mJ Amplification Section Working Group on Space-based Lidar Winds

  14. Harmonic section 200 mJ IR + VIS 150 mJ UV Energy 350 mJ IR Energy Working Group on Space-based Lidar Winds

  15. Laser Opto-Thermo-Mechanical Design description Working Group on Space-based Lidar Winds

  16. Reference Laser Head (RLH) • Based on two Non Planar Ring Oscillators (monolithic design ensures high stability) • The Reference Laser is stabilized to a low drift resonator • The beat signal between seeder laser and reference laser is processed by a digital PLL (frequency locking loop) • The seeder beam is injected in a monomode fiber connected to the PLH Working Group on Space-based Lidar Winds

  17. Power Laser Head (PLH) Optomechanical Layout Working Group on Space-based Lidar Winds

  18. Power Laser Head (UOB + LOB) Working Group on Space-based Lidar Winds

  19. Upper Optical Bench (UOB) of the PLH Working Group on Space-based Lidar Winds

  20. Master Oscillator (MO) Rod & RMax • Cavity length is folded by 4 mirrors mounted on an Invar plate • The output coupler, the cavity end mirror (on the rod) and the Invar plate are mounted on the UOB Invar plate The piezo-actuator holds the output coupler Working Group on Space-based Lidar Winds

  21. LD2 LD4 LD6 LD8 LD3 LD5 LD7 LD1 Pump unit (1) • Zig-Zag Nd:YAG slab Laser diode pumped in front of the beam TIR for efficient optical energy extraction • Slab TIR coating LIDT limited @ about 100 MW/cm2 • 1000 W Laser Diodes Stacked Array used @ derated power ( ~700 W) • Typical lifetime 5.109 shots Working Group on Space-based Lidar Winds

  22. Pump Unit (2) • The pump unit (PU) is made in copper • Conductively cooled unit ( with thermal filler to minimize air-vacuum transition effect) • Operated @ 50 Hz • About 200 W average Heat dissipation PU longitudinal cross section Working Group on Space-based Lidar Winds

  23. PUMP UNIT (3) Pre-Amp PU installed on the UOB Working Group on Space-based Lidar Winds

  24. Harmonic Generation • LBO crystals used for SHG (25mm) and THG (35mm) • Type I Phase Matching for SHG, Type II Phase Matching for THG • Heater controlled crystal temperature higher than 30oC Working Group on Space-based Lidar Winds

  25. UOB Power Laser Head (PLH) Working Group on Space-based Lidar Winds

  26. LOB Power Laser Head (PLH) Working Group on Space-based Lidar Winds

  27. Pump Laser Diodes operation The heat current will be adjusted according to the formula: to keep constant the distribution of absorbed pump energy in the Nd:YAG rod and slab (same heat dissipation @ laser diode => same emission wavelength) Working Group on Space-based Lidar Winds

More Related