1 / 15

4-bit Full-Adder With Ripple Carry

4-bit Full-Adder With Ripple Carry . Adrian Corona Tuessia Ly Ali N. Warriach Advisor: Dave Parent Dec. 6, 2004. Agenda. Abstract Introduction Why Simple Theory Back Ground information (Lit Review) Summary of Results Project (Experimental) Details Results Cost Analysis Conclusions.

jaden
Télécharger la présentation

4-bit Full-Adder With Ripple Carry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 4-bit Full-Adder With Ripple Carry Adrian Corona Tuessia Ly Ali N. Warriach Advisor: Dave Parent Dec. 6, 2004

  2. Agenda • Abstract • Introduction • Why • Simple Theory • Back Ground information (Lit Review) • Summary of Results • Project (Experimental) Details • Results • Cost Analysis • Conclusions

  3. Abstract • We attempted to design a 4-bit Full Adder with Ripple carry that operated at 200 MHz and uses less than 23W/cm2 of Power and occupied an area of 295x68mm2

  4. Introduction • Ripple Carry Full Adders are foundation for other logics. • It serves as a basic tool for Carry Look Ahead adders which are used for MSI adders and ALUs.

  5. Project Details • Hand Calculations • Cell based technique - Built and created each layout of 1-bit separately and tested LVS. • Final Schematic • Final Layout • Final Simulation

  6. Longest Path Calculations

  7. Schematic

  8. Layout

  9. Layout w/o FF

  10. Verification

  11. Simulations

  12. Cost Analysis • Time spent on each phase of the project • Verifying logic = 3 hours • Verifying timing = 12 hours • Layout = 20 hours • Post extracted timing = 4 hours

  13. Lessons Learned • Get extremely familiar with the Cadence tool. • Plan ahead and stay on schedule. • Get professor’s advice more often.

  14. Summary • Our design of 4-bit Full Adder with Ripple Carry is a building block for Carry Look Ahead adder which can further be used for MSI adders and ALUs. • We were successful in proving that our design works without the Flip Flops. • In future we think its better to work with the Carry Look Ahead adder instead.

  15. Acknowledgements • Thanks to our significant others for bearing our time away from home. • Thanks to Cadence Design Systems for the VLSI lab • Thanks to Synopsys for Software donation • Thanks to Dr. Parent for his patience and valuable lessons.

More Related