1 / 28

5.1 Exothermic reactions

Topic 5- energetics SL 5.1 Exothermic and endothermic reactions 5.2 Calculation of Energy/Enthalpy Changes 5.3 Hess law 5.4 Bond enthalpy. 5.1 Exothermic reactions. Heat is produced and transferred to surroundings NaOH (s ) + H 2 O  NaOH ( aq ) + heat

jania
Télécharger la présentation

5.1 Exothermic reactions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Topic 5-energetics SL5.1 Exothermic and endothermic reactions5.2Calculation of Energy/Enthalpy Changes5.3 Hess law5.4 Bond enthalpy

  2. 5.1 Exothermic reactions • Heat is produced and transferred to surroundings • NaOH(s) + H2O NaOH(aq) + heat • HCl + NaOHNaCl + H2O + heat Neutralisation • Wood + O2 CO2 + H2O + heat Combustion

  3. Exothermic- compare explosion

  4. Endothermic reactions • Heat is consumed from surroundings- it gets colder or you need to heat • Ba(OH)2(s) + 2 NH4SCN(s) + heat  Ba2+(aq) + 2 SCN-(aq) + 2 H2O(l) + NH3(aq)

  5. Enthalpy, H • H = internal energy. The total chemical energy of a system. Some of the energy is stored in chemical bonds.

  6. DH = enthalpy change • There is no “absolute zero” for enthalpy => enthalpy for a particular state cannot be measured but changes in enthalpy during reactions can be measured. • DH = Hproducts – Hreactants

  7. In the reaction 2 H2 (g) + O2 (g) 2 H2O (g) Hreactants- Enthalpyofreactants Hproducts- Enthalpyofproducts DH= Hproducts- Hreactants= - 486 kJ Enthalpy, H 2 H2 + O2 - 486 kJ EXOTHERMIC 2 H2O

  8. In the reaction 1/2 N2(g) + O2 (g) NO2(g) DH= Hproducts- Hreactants= 33,9 kJ/mol Enthalpy, H NO2 33,9 kJ 1/2 N2 + O2 ENDOTHERMIC

  9. Exothermic reaction CH4 + 2 O2  CO2 + 2H2O + heat Energy rich Energy poor • DH = (Energy poor) – (Energy rich) => negative value => In Exothermic reactions: DH < 0 => Gives more stable products => In Endothermic reactions DH > 0 => Gives more reactive products.

  10. DHo: standard enthalpy change of reaction Standard conditions: p =101.3 kPa, T =298 K Factors affecting DHo • The nature of the reactants and products • The amount • Changing state involves the enthalpy change • The temperature and pressure of the reaction surroundings

  11. DHfo: standard enthalpy of formation (cf. page 8 in Data Booklet) The enthalpy difference for the reaction when the substance is formed from it’s elements under standard conditions.

  12. 5.2 Calculation of Energy/Enthalpy Changes • Measurements: Open calorimeter Bomb calorimeter

  13. Calculation of heat of solution • q = c . M . DT (page 1 in Data Booklet) • q= energy (J) • m = mass (g) • DT = temperature change (K) • c = specific heat capacity, different for all substances • E.g. 4.18 J/g*K for Water

  14. Example • The heat energy required to heat 50 g of water from 20oC to 60oC is: q = 50*4.18*(60-40) = 8364 J = 8.364 kJ Energy and heat are always positive

  15. Enthalpy changes Mg + ½ O2MgODH = -1202 kJ/mol Exothermic • The amount of energy released when 0.6 g of Mg is burnt? Mg m 0.6 g M 24.3 g/mol n 0.025 mol q=1202*0.025 = 30 kJ (energy is always positive)

  16. 5.3 Hess’s law • The principle of conservation of energy states that energy cannot be created or destroyed. • The total change in chemical potential (enthalpy change) must be equal to the energy gained or lost. • The total enthalpy change on converting a given set of reactants to a particular set of products is constant, irrespective of the way in which the change is carried out.

  17. http://www.ausetute.com.au/hesslaw.html C + ½ O2  CO DH1=-283,0 kJ CO +½ O2  CO2 DH2=-110,5 kJ C + O2  CO2 DH3 = DH1+DH2= -393, 5 kJ

  18. http://www.mikeblaber.org/oldwine/chm1045/notes/Energy/HessLaw/Energy04.htmhttp://www.mikeblaber.org/oldwine/chm1045/notes/Energy/HessLaw/Energy04.htm

  19. 5.4 Bond Enthalpies • Break chemical bonds requires energy => Endothermic process • Form chemical bonds => Exothermic process • Approximate enthalpy change, DH, can be calculated by looking at bonds being broken and formed in the reaction.

  20. Average bond enthalpies • gaseous molecule into gaseous atoms (not necessary the normal state) • approx in different molecules • not so precise data, but normally within 10 % • cf. page 7 in Data Booklet

  21. CalculateDH for the reaction: 2 H2 (g) + O2 (g) 2 H2O (g) H-H 436 kJ/mol H-O 464 kJ/mol O=O 498 kJ/mol

  22. Enthalpy 4 H + 2 O + 1370 kJ 2 H2 + O2 The bondsof the reactantsare broken, enthalpy is needed 2 mol H-H = 2* 436= 872 kJ 1 mol O=O = 498 kJ Sum 1370 kJ is spent

  23. Enthalpy 4 H + 2 O + 1370 kJ 2 H2 + O2 - 1856 kJ 2 H2O 2.The free hydrogen and oxygen atoms form bondstocreate the products. The bond enthalpy is released 2*2 mol H-O = 4* 464= 1856 kJ is formed

  24. Enthalpy 4 H + 2 O + 1370 kJ 2 H2 + O2 - 1856 kJ 2 H2O + 486 kJ 3. The enthalpyof the productsare 1856-1370 = 486 kJ lowerthan the reactants The excess enthalpy 486 kJ is releasedto the surroundings. Exothermicreaction, DH= -486 kJ/mol The ”extra” enthalpyneeded (1370 kJ) is called ACTIVATION ENERGy

  25. N2(g) + 3 H2(g)2 NH3 (g) (Enthalpies involved (see data booklet page 7)) N≡N 945kJ/mol H-H 436 kJ/mol N-H 391 kJ/mol DH = (bonds broken) – (bonds formed) = (945 + 3*436) – (2*3*391) = -93 kJ/mol Exothermic (If using other data DHf = -92kJ/mol)

  26. Enthalpy 6 H + 2 N + 2253 kJ N2+ 3 H2 -2346 kJ 2 NH3 + 93 kJ N2 + 3 H2 2 NH3 The enthalpyof the productsare2346-2253 = 93 kJ lowerthan the reactants The excess enthalpy96 kJ is releasedto the surroundings. Exothermicreaction, DH= -93 kJ/mol

  27. 1/2 N2(g) + O2 (g) NO2(g) Enthalpy 2 O + N ENDOTHERMIC -812 kJ + 970,5 kJ The sumof the bondenthalpies NO2 ½ N2+ O2 - 93 kJ The freenitrogen and oxygen atoms form bondstocreate the products. The bond enthalpyis released. 1 mol N-O = 222kJ 1mol N=O = 590 kJ 812 kJ is formed The bondsof the reactantsare broken, enthalpy is needed 1/2 mol N≡N 1/2* 945= 472,5 kJ 1 mol O=O = 498 kJ Sum970,5 kJ is spent The resultingenthalpy, 93 kJ is taken from the surroundings. Endothermicreaction, DH= 93 kJ/mol

More Related