1 / 40

LiFi based Communications Networks: Research Challenges and Solutions

LiFi based Communications Networks: Research Challenges and Solutions. Prof. Abhishek Dixit. IIT Delhi. Tuesday, February 5, 2019. Contents. Motivations for VLC Research Challenges and Solutions Project & Research activities at IITD Conclusions. Contents. Motivations for VLC

jankowski
Télécharger la présentation

LiFi based Communications Networks: Research Challenges and Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LiFibasedCommunications Networks: ResearchChallenges and Solutions Prof. Abhishek Dixit IIT Delhi Tuesday, February 5, 2019

  2. Contents • Motivations for VLC • Research Challenges and Solutions • Project & Research activities at IITD • Conclusions Visible Light Communication

  3. Contents • Motivations for VLC • Research Challenges and Solutions • Project & Research activities at IITD • Conclusions Visible Light Communication

  4. Motivation for VLC Visible Light Communication

  5. Standardization ITU-T G.vlc IEEE 802.11bb IEEE 802.15.7 IEEE 802.15.7m IEEE 802.15.13 CP-1222 CP-1223 CP-1221 IEC-62943 Li-Fi Networks

  6. Contents • Motivations for VLC • Research Challenges and Solutions • Channel Modelling • Challenges at the Transmitter • Modulation Schemes • Multiplexing Techniques • Indoor Positioning Systems • Media Access Control • Project & Research activities at IITD • Conclusions Visible Light Communication

  7. Multipath Channel Model for VLC Channel impulse response (CIR)[1] • : CIR after k bounces; : total number of LEDs. • S: surface of all reflectors; : area of reflector; : wall reflectivity, m: Lambertian order of emission • For the ithbounce, path loss, angle of incidence, angle of reflection and path length. Fig: Multipath propagation model of diffuse VLC link. [1] K. Lee et al., Indoor Channel Characteristics for Visible Light Communications, 2011. Visible Light Communication

  8. Channel Characterization Channel Parameters[2] Mean excess delay, RMS delay spread, where, Coherence bandwidth, Fig: Channel impulse response for LoS path and multipath. Tx 5 m Rx 5 m [2] F. Miramirkhaniet al., Channel modeling and characterization for visible light communications, 2015. *results based on research work of Rishu Raj (PhD Scholar) and Sonu Jaiswal (M.Tech. Student) Visible Light Communication

  9. Contents • Motivations for VLC • Research Challenges and Solutions • Channel Modelling • Challenges at the Transmitter • Modulation Schemes • Multiplexing Techniques • Indoor Positioning Systems • Media Access Control • Project & Research activities at IITD • Conclusions Visible Light Communication

  10. Challenges at the Transmitter • Flickering • Dimming support • Optimization of LED semi-angle Flickering Dimming Support Visible Light Communication

  11. Optimization of LED Semi-Angle (b) (a) Fig: Spatial distribution of received optical power for (a) = 70° and (b) = 30° Degree of non-uniformity (DNU) Fig: Effect of changing LED semi-angle on average received power, Pavg and degree of non-uniformity, DNU. [3] K. Saxena, R. Raj and A. Dixit, A novel optimization approach for transmitter semi-angle and multiple transmitter configurations in indoor visible light communication links, ICCCNT 2018. Visible Light Communication

  12. Optimization of LED Semi-Angle (LoS path) Optimization Function, F Fig: Variation in optimal LED semi-angle with different values of exponents αandβ. Fig: F-plot for optimization of semi-angle with four LED panels and α = β = 1. [3] K. Saxena, R. Raj and A. Dixit, A novel optimization approach for transmitter semi-angle and multiple transmitter configurations in indoor visible light communication links, ICCCNT 2018. Visible Light Communication

  13. Contents • Motivations for VLC • Research Challenges and Solutions • Channel Modelling • Challenges at the Transmitter • Modulation Schemes • Multiplexing Techniques • Indoor Positioning Systems • Media Access Control • Project & Research activities at IITD • Conclusions Visible Light Communication

  14. Dimming Based Modulation Schemes Variable On-Off Keying (VOOK) Variable Pulse Position Modulation (VPPM) • Dimming is achieved by filling the non data portion of symbol with filler bits • Maintains constant data rate • Provides dimming by adjusting pulse width. • Duty cycle is proportional to required dimming level Fig: VPPM symbols for bit ‘0’ and bit ‘1’ with (a) 60 % and (b) 20 % dimming Fig: VOOK symbols for (a) 90 %, (b) 70 %, (c) 30 % and (d) 10 % dimming Visible Light Communication

  15. Dimming Based Modulation Schemes Multiple Pulse Position Modulation (MPPM) • The transmitter sends optical pulses during anyw out of n number of slots (1 ≤ w ≤ n) • Number of symbols that can be transmitted for a given n and w is nCw • For a fixed value of n, dimming can be achieved by varying w Overlapping Pulse Position Modulation (OPPM) • Special case of MPPM where the transmitter sends optical pulses during w number of consecutive slots • Number of symbols that can be transmitted for a given n and w is (n – w + 1) • (a) (b) (c) Fig: Sample waveforms for (a) 4-PPM, (b) MPPM {n = 6, w = 3} and (c) OPPM {n = 6, w = 3} Visible Light Communication

  16. Contents • Motivations for VLC • Research Challenges and Solutions • Channel Modelling • Challenges at the Transmitter • Modulation Schemes • Multiplexing Techniques: OFDM and NOMA • Indoor Positioning Systems • Media Access Control • Project & Research activities at IITD • Conclusions Visible Light Communication

  17. Orthogonal Frequency Division Multiplexing Add DC Bias and/or Clipping P/S and CP addition S/P and Mapping Hermitian Symmetry DAC and LPF Data IFFT LED Transmitter Optical Channel Receiver PD Decoding and P/S CP removal and S/P DC biased optical OFDM (DCO - OFDM ) • DC bias is added, energy inefficient • Better performance when higher spectral efficiency required Asymmetrically clipped optical OFDM (ACO - OFDM) • Negative part of the signal is clipped, energy efficient. • Preferred with low order constellations (low spectral efficiency) Filter and ADC FFT Output Noise Visible Light Communication

  18. Comparison of DCO-OFDM and ACO-OFDM Fig: CCDF plots for comparison of PAPR performance Fig: Comparison of BER performance *results based on research work of Gaurav Pandey (PostDoc Fellow) and MahendraBhadoria (M.Tech. Student) Visible Light Communication

  19. Performance analysis with different orders of M-QAM Fig: BER performance of DCO-OFDM for varying order (M) of M-QAM Fig: BER performance of ACO-OFDM for varying order (M) of M-QAM *results based on research work of Gaurav Pandey (PostDoc Fellow) and MahendraBhadoria (M.Tech. Student) Visible Light Communication

  20. Non-Orthogonal Multiple Access • users are multiplexed in the power domain by assigning distinct power levels to different users depending upon their channel conditions • uses superposition coding at the transmitter and successive interference cancellation (SIC) at the receiver • achieves superior spectral efficiencies • all users can use the entire available bandwidth of the system Fig: Block diagram of basic NOMA scheme with K users.[4] [4] L. Yin et al. , Performance Evaluation of Non-Orthogonal Multiple Access in Visible Light Communication, 2017. Visible Light Communication

  21. Power Allocation Schemes in NOMA Gain Ratio Power Allocation (GRPA)[5] Normalized Gain Difference Power Allocation (NGDPA)[5] where : electrical power allocation for nth user : LOS optical channel gain between LED and nthuser [5] C. Chen et al., On the Performance of MIMO-NOMA-Based Visible Light Communication Systems, 2018. Visible Light Communication

  22. Power Allocation Schemes in NOMA 1 m LED1 LED2 User2 User1 r R = 2 m • Table: System parameters Fig: Achievable sum rate and sum rate gain of NGDPA over GRPA. *results based on research work of Rishu Raj (PhD Scholar) and Vipul Yadav (M.Tech. Student) Visible Light Communication

  23. Performance Evaluation of NOMA Fig: BER performance of VLC system with and without NOMA when r/R = 0.3. *results based on research work of Rishu Raj (PhD Scholar) and Vipul Yadav (M.Tech. Student) Visible Light Communication

  24. Contents • Motivations for VLC • Research Challenges and Solutions • Channel Modelling • Challenges at the Transmitter • Modulation Schemes • Multiplexing Techniques • Media Access Control • Project & Research activities at IITD • Conclusions Visible Light Communication

  25. Contents • Motivations for VLC • Research Challenges and Solutions • Channel Modelling • Challenges at the Transmitter • Modulation Schemes • Multiplexing Techniques • Indoor Positioning Systems • Media Access Control • Project & Research activities at IITD • Conclusions Visible Light Communication

  26. Media Access Control in VLC Problem with VLC MAC • VLC MAC works on CSMA/CA similar to WiFi and • follows distributed approach mainly • is not optimized • has QoS issues • slotted CSMA/CA in standard[6] suggests centralized MAC, but is not preferred/used Solutions • Use centralized based MAC protocols • Better QoS control [6] IEEE Std 802.15.7-2011, Sep. 2011. Li-Fi Networks

  27. Comparison of distributed vs centralized Table : Simulation Parameters Fig: Mean delay vs the normalized load Distributed Centralized

  28. Contents • Motivations for VLC • Research Challenges and Solutions • Project & Research activities at IITD • Conclusions Visible Light Communication

  29. Li-Fi Project (Subproject of 5G TestBed) IIT Delhi Funding: Department of Telecommunication (DoT), Ministry of Communications, Government of India. End Date: March, 2021 Visible Light Communication

  30. Team Structure Li-Fi Networks

  31. Objectives • Goal of the project is to develop a Li-Fi test-bed • Real-time bi-directional communication channel (link length 3.5 m) • Downstream (VLC): at data rate of 500 Mbps • Upstream (Infrared): at data rate of 100 Mbps • Fast handovers to support user mobility of less than 5 km/h. • MAC layer to ensure latency below 100 ms and packet loss rate below 5% for a user density of 1 persons/5m2. Li-Fi Networks

  32. What would be our contribution? Li-Fi Networks

  33. Technical specifications of the project Li-Fi Networks

  34. Test bed setup for Version 0 Light emitting diode and lens assembly Lens, photo-detector and receiver circuit Transmitter circuit Li-Fi Networks

  35. Results Input Waveform (data rate 1 Mbps) Output Waveform Li-Fi Networks

  36. Results (BER Calculation) Li-Fi Networks

  37. Test bed setup for Version 0 Spatial multiplexing 5 cm TRANSMITTER CIRCUIT RECEIVER CIRCUIT Plano-convex lens OSCILLOSCOPE DATA (NRZ) 1.5 m RECEIVER SIDE TRANSMITTER SIDE Li-Fi Networks

  38. Contents • Motivations for VLC • Research Challenges and Solutions • Project & Research activities at IITD • Conclusions Visible Light Communication

  39. Conclusions • VLC is a promising technology – data rates, health safe, cheap • Targets to get up to 500 Mb/s with right modulation and multiplexing solutions • We achieved up to 1 Gb/s with OOK Visible Light Communication

  40. Thank You ! Visible Light Communication

More Related