1 / 33

Unit 1 Energy Scenario

Unit 1 Energy Scenario. Asst.Prof . Krunal Khiraiya Mechanical engineering department Parul institute of engineering and technology. Energy. Energy defines as “ability to do work” OR “capacity to do work” Energy is one of the major inputs for the economic development of any country.

javan
Télécharger la présentation

Unit 1 Energy Scenario

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Unit 1Energy Scenario Asst.Prof. KrunalKhiraiya Mechanical engineering department Parul institute of engineering and technology

  2. Energy Energy defines as “ability to do work” OR “capacity to do work” Energy is one of the major inputs for the economic development of any country. In the case of the developing countries, the energy sector assumes a critical importance in view of the ever increasing energy needs requiring huge investments to meet them.

  3. Various Units of Energy Jules British Thermal Units(Btu) Kilowatt-hours (Kwh) Calorie Tones of oil equivalent (Toe) l Btu=1055.1 J 1 kWh=3.6 MJ l cal=4.186 J

  4. Sources of Energy Energy can be classified into several types based on the following criteria: • Primary and Secondary energy • Commercial and Non commercial energy • Renewable and Non-Renewable energy Primary energy sources are those that are either found or stored in nature. Common primary energy sources are coal, oil, natural gas Secondary energy source This is an energy source which does not exist in nature but is produced from a primary energy source, such as electricity generated from the burning of fossil fuels.

  5. PRIMARY ENERGY SECONDARY ENERGY Petroleum products, manufactured solid fuels and gases etc. Crude oil, Hard Coal, Natural Gas, Nuclear etc. To consumption Transformation Electricity and heat Waste Bio fuels etc. Biomass, wind, hydro, tide etc.

  6. Commercial energy The energy sources that are available in the market for a definite price are known as commercial energy resources. • Eg: Coal, Petroleum, Electricity, etc. Non Commercial energy The energy resources that are not available in the market for a definite price are called as non commercial energy resources. Eg. Firewood, cattle waste, agricultural waste, etc.

  7. Commercial energy Non Commercial energy • The commercial energy has great economic value. • This energy pollutes the environment badly. • This types of energy are limited in nature. • High capital investment is required in the purification. • It is used in urban as well as rural areas. • Coal, petroleum, natural gas and nuclear energy. • The non-commercial energy is cheaper. • This is pure and keeps the environment clean. • Abundant in nature. • It can be used in raw form. • It is dominantly used in rural areas. • Cow dung, charcoal, firewood and agricultural waste.

  8. Renewable energy is energy obtained from sources that are essentially inexhaustible. Non-renewable energy is the conventional fossil fuels such as coal, oil and gas, which are likely to deplete with time. “Renewable ” (Non-Conventional) Solar ,Wind, Bio gas “Non-Renewable ” (Conventional) Coal, Oil, Gas, Nuclear

  9. World Primary Energy Consumption Data Source: http://www.iea.org/

  10. India-Primary Energy mix

  11. Energy End Uses

  12. India – Installed power capacity

  13. Coal Supply Coal dominates the energy mix in India, contributing to 55% of the total primary energy production. Over the years, there has been a marked increase in the share of natural gas in primary energy production from 10% in 1994 to 13% in 1999. There has been a decline in the share of oil in primary energy production from 20% to 17% during the same period. India has huge coal reserves, at least 84,396 million tonnes of proven recoverable reserves (at the end of 2003). This amounts to almost 8.6% of the world reserves and it may last for about 230 years at the current Reserve to Production (R/P) ratio. In contrast, the world’s proven coal reserves are expected to last only for 192 years at the current R/P ratio.

  14. Coal Supply Reserves/Production (R/P) ratio- If the reserves remaining at the end of the year are divided by the production in that year, the result is the length of time that the remaining reserves would last if production were to continue at that level. India is the fourth largest producer of coal and lignite in the world. Coal production is concentrated in these states (Andhra Pradesh, Uttar Pradesh, Bihar, Madhya Pradesh, Maharashtra, Orissa, Jharkhand, West Bengal).

  15. Oil Supply Oil accounts for about 36 % of India's total energy consumption. India today is one of the top ten oil-guzzling nations in the world and will soon overtake Korea as the third largest consumer of oil in Asia after China and Japan. The country’s annual crude oil production is peaked at about 32 million tonne as against the current peak demand of about 110 million tonne. In the current scenario, India’s oil consumption by end of 2007 is expected to reach 136 million tonne(MT), of which domestic production will be only 34 MT. India will have to pay an oil bill of roughly $50 billion

  16. NaturalGas Supply Natural gas accounts for about 8.9 per cent of energy consumption in the country. The current demand for natural gas is about 96 million cubic metres per day (mcmd) as against availability of 67 mcmd. By 2007, the demand is expected to be around 200 mcmd. Natural gas reserves are estimated at 660 billion cubic meters.

  17. India - Fossil Fuel reserves Data Source Plg Comm IEPC, 2006

  18. Energy Consumption and Air Pollution SO2 NOx CO SPM CO2 CFC Modification of Atmospheric properties/processes Photochemical Smog Precipitation Acidity Visibility Corrosion Potential Radiation Balance Alteration Ultraviolet energy absorption

  19. Need for Alternatives Fossil fuel reserves limited India - 17% of World population, 4% of primary energy Present pattern – predominantly fossil based (87% comm., 64% total) 52% of households un electrified Linkage between energy services and quality of life

  20. Energy Conservation Objective Broadly energy conservation program initiated at micro or macro level will have the following objectives of manufactured goods (either lower process or increased) availability and profitability, and in consequence raise the standard of living both of the workers in industry and of those who buy the products. a) To reduce imports of energy and reduce the drain on foreign exchange. b) To improve exports of manufactured goods (either lower process or increased availability helping sales) or of energy, or both. c) To reduce environmental pollution per unit of industrial output - as carbon dioxide, smoke, sulphur dioxide, dust, grit or as coal mine discard for example. d) Thus reducing the costs that pollution incurs either directly as damage, or as needing, special measures to combat it once pollutants are produced. e) Generally to relieve shortage and improve development

  21. Energy Conservation Energy Conservation and Energy Efficiency are separate, but related concepts. Energy conservation is achieved when growth of energy consumption is reduced, measured in physical terms. Energy Conservation can, therefore, be the result of several processes or developments, such as productivity increase or technological progress. Energy efficiency is achieved when energy intensity in a specific product, process or area of production or consumption is reduced without affecting output, consumption or comfort levels.

  22. Promotion of energy efficiency will contribute to energy conservation and is therefore an integral part of energy conservation promotional policies. Energy efficiency is often viewed as a resource option like coal, oil or natural gas. It provides additional economic value by preserving the resource base and reducing pollution. For example, replacing traditional light bulbs with Compact Fluorescent Lamps (CFLs) means you will use only 1/4th of the energy to light a room. Pollution levels also reduce by the same amount Energy efficiency means using less energy to perform the same function.

  23. Principles of energy conservation Some general principles of energy conservation are explained below Recycling of energy from waste Waste heat utilization Modernization of technology Total energy cogeneration Training of man power Proper operation and maintenance Judicial use of proper types of energy and fuel

  24. Recycling of energy from waste Discarded, rejected, scrapped, waste material contains valuable and useful materials. The same can be separated and reused in economical manner. Recycling is a process of recovering usable material from waste, processing it to required acceptable specification and reintroduce in the economy for use. The advantages of recycling are as: The problem of waste disposal and environmental degradation due to discarded material is minimized economically. Saving of energy as the energy spent in recycling is only a fraction of the energy needed in extraction of fresh material from new source. Conventional resources of new material are saved. Example, recycling of waste papers into new papers saves precious trees which form raw material for paper production.

  25. Waste heat utilization Various industrial processes require heat of different grades. Waste heat from one process can serve the need of another, which requires heat at a lower grade. Modernization of technology The energy consumption can be reduced by adoption energy efficient modern technology. Developed countries have been able to reduce the energy consumption significantly compared to be developing countries by adopting energy efficient modern technology.

  26. Energy Strategy for the Future The energy strategy for the future could be classified into immediate, medium-term and long-term strategy. The various components of these strategies are listed below: Immediate term strategy Medium-term strategy Long-term strategy

  27. Immediate-term strategy Rationalizing the tariff structure of various energy products. Optimum utilization of existing assets Efficiency in production systems and reduction in distribution losses, including those in traditional energy sources. Promoting R&D, transfer and use of technologies and practices for environmentally sound energy systems, including new and renewable energy sources.

  28. Long-term strategy Efficient generation of energy resources • Efficient production of coal, oil and natural gas • Reduction of natural gas flaring Improving energy infrastructure • Building new refineries • Creation of urban gas transmission and distribution network • Maximizing efficiency of rail transport of coal production. • Building new coal and gas fired power stations.

  29. Long-term strategy Enhancing energy efficiency • Improving energy efficiency in accordance with national, socio-economic, and environmental priorities • Promoting of energy efficiency and emission standards • Labeling programmes for products and adoption of energy efficient technologies in large industries Deregulation and privatization of energy sector • Reducing cross subsidies on oil products and electricity tariffs • Decontrolling coal prices and making natural gas prices competitive • Privatization of oil, coal and power sectors for improved efficiency. Investment legislation to attract foreign investments. • Streamlining approval process for attracting private sector participation in power generation, transmission and distribution .

  30. Medium-term strategy Demand management through greater conservation of energy, optimum fuel mix, structural changes in the economy, an appropriate model mix in the transport sector, i.e. Greater dependence on rail than on road for the movement of goods and passengers and a shift away from private modes to public modes for passenger transport; changes in design of different products to reduce the material intensity of those products, recycling, etc. • There is need to shift to less energy-intensive modes of transport. This would include measures to improve the transport infrastructure viz. roads, better design of vehicles, use of compressed natural gas (CNG) and synthetic fuel, etc. Similarly, better urban planning would also reduce the demand for energy use in the transport sector. • There is need to move away from non-renewable to renewable energy sources viz. solar, wind, biomass energy, etc.

More Related