1 / 13

A combined heat and power solar concentrating collector Joe Coventry

A combined heat and power solar concentrating collector Joe Coventry Centre for Sustainable Energy Systems Australian National University. The CHAPS collector. C ombined H eat A nd P ower S olar Collector

jeanne
Télécharger la présentation

A combined heat and power solar concentrating collector Joe Coventry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A combined heat and power solar concentrating collector Joe Coventry Centre for Sustainable Energy Systems Australian National University

  2. The CHAPS collector • Combined Heat And Power Solar Collector • Generation of DC electricity AND Generation of hot water • Applications: • DHW, HHW and electricity • Commercial buildings • Light industrial buildings • Residential colleges (eg. Bruce Hall 300m2 system)

  3. CHAPS system components • CHAPS troughs • 24 m long x 1.6 m wide rows • 37x geometric concentration ratio • Modular system • Solar cells • 20% efficient under 30suns and 25°C • Low series resistance • Manufactured at ANU

  4. CHAPS system components Receivers • Aluminium extrusion • Series connected solar cells • Finned fluid conduit • Glasswool insulation • Anti-freeze, anti-corrosive heat transfer fluid • Assembled at ANU • Mirrors • Glass-on-metal laminate mirrors • Silver backed mirror • Stamped tab ribs • Manufactured at ANU

  5. Efficiency tests • Measured on a custom built outdoor test rig at ANU with: • 1.25 m wide trough • 27 solar cell receiver • Steady state conditions • Maximum power point electrical load • Range of input temperatures • Constant low flow conditions • Efficiency results include: • Losses due to receiver shading • Losses due to hydraulic connections

  6. Efficiency Results

  7. Flux profile across a cell • Illumination profile • measured using videographic flux mapping techniques • Peaks exceeding 100 suns • Significant temperature variation across cells

  8. Cells & Modules – testing • Range of cell and module tests • UV testing • High temperature testing • Humidity testing • Thermal cycling • On sun! • Challenges • Differential expansion • Corrosion • Water ingress

  9. Receiver design • Domestic system • Mechanical bond • Adhesives • Intermetalic bond • Electroplating • Commercial system • Closed circuit

  10. Attaching the cells • Thermal tape • Alumina based substrates • Anodising • Plasma coating

  11. Interconnections • Tabs • Tab connections • Braid • Shim • Spot welding

  12. Optical system • GOML mirror • Low iron glass • Silicone • Textured cells

  13. Conclusions • Significant work on reliability, longevity • CHAPS systems beginning to be commercialised

More Related