1 / 8

QCD Triggers

E. f. h. QCD Triggers. Andrew Brandt, U. Texas at Arlington. Trigger Workshop April 10, 2003 Fermilab. Keepers. JT_45TT, JT_65TT medium E T will NOT be changed Zero_bias_GAP* monitors will NOT be changed JT_25TT_NG low E T will NOT be changed, but can

jed
Télécharger la présentation

QCD Triggers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. E f h QCD Triggers Andrew Brandt, U. Texas at Arlington Trigger Workshop April 10, 2003 Fermilab

  2. Keepers JT_45TT, JT_65TT medium ET will NOT be changed Zero_bias_GAP* monitors will NOT be changed JT_25TT_NG low ET will NOT be changed, but can get bandwidth somewhat reduced to accommodate new triggers if necessary JT_95TT will NOT be changed before summer…

  3. JT_95TT Main unprescaled High ET, single jet trigger CJT(4,5) L2JET(1,30) L3JET(1,95) 40E30: L1=52 Hz L2= 39 Hz L3=0.22 Recent L2 change increased L2rej from 1.06 to 1.33 Expansion to ||<3.2 increased L1 from 44 to 52 Hz but did not increase rate to tape* 60E30: L2=59 Hz; 80E30: L2=78 Hz Would like to add new version with CJT(3,5) and higher L2: CJT(3,5) L1=156 Hz, L2=?, Keep current version through summer shutdown (exact L2 threshold still needs study) *In general L1 increased by 20%, but L3 by 0-10% for all QCD triggers, must understand

  4. JT_125TT Backup trigger (complete subset of JT_95TT) just in case super high luminosity happens CJT(4,7) L3JET(1,125) 40E30 L1=11Hz L2= 11 Hz L3=0.04 CJT(7) may disappear. Ideally would change to CJT(3,5), but need to verify that L2(60?) is okay. Could go to CJT(4,5). Needs study. QCD group not interested in CJT_OR, problem is controlling L2, not L1 efficiency in middle of cross section

  5. QCD Special Run-Low ET Studied new minbias+L3 jet monitor triggers (Tamsin Edwards, Pavel Demine) http://www-clued0.fnal.gov/~demine/special_run_analysis_20030409.pdf At first glance jets look suspect, so more study needed. Also looked at CJT(2,3) L3JET(1,15) has ~same L1 rate as JT_8TT (CJT(1,5), but 4x lower L3 rate, will provide good stable lower ET trigger for physics and for measuring efficiency. Request addition of JT_15TT: CJT(2,3) L3JET(1,15) (0.5 Hz at 20E30, 0.2 Hz at 40E30)

  6. QCD Low ET Turn-on Curves http://www-hep.uta.edu/QCD/jet_turnon.pdf (Greg Davis) JT_45TT seems to turn on around 70 GeV, why so late? Needs more study Ultra-prelimary plots from special run show turn on of JT_25TT_NG around 35, why so early? Why 70%? Why don’t we re-bin this plot? Clearly JT_15TT will be useful addition, other plots show that jets are healthy for this trigger

  7. QCD Special Run-Gap Currently JT_25TT_GAPN,S,SN Ex.: CJT(2,5) L3JET(1,25) GAPN 40E30 pre=2 L1=3 L2=3 L3=0.6 CJT(2,5) L3JET(1,45) GAPN gives x5 rejection at L3 allows addition of CJT(2,3) L3JET(1,15) x9 higher L1 x4 higher L3 (than 25 trigger) 40E30 CJT(2,3) L3JET(1,15) Pre=14 L1/L2=4.3 L3=0.34 CJT(2,5) L3JET(1,45) Pre=1 L1/L2=6 L3=0.24 60E30 CJT(2,5) L3JET(1,45) Pre=1 L1/L2=9 L3=0.36 Request addition of JT_15TT_GAPN,S,SN: CJT(2,3) L3J(1,15)+GAP Request modification of JT_25TT_GAPN,S,SN: L3J(25)->L3J(45) (L3 bandwidth unchanged, few more Hz of L2)

  8. QCD Summary Need L2 studies on CJT(3,5) trigger for setting thresholds for JT_95TT and JT_125TT, plan to add duplicate of JT_95TT and replace JT_125TT (not a big hurry) Continue study of Minbias+L3 triggers At some point might add L3 vertex tool Add JT_15TT with CJT(2,3) Change current gap triggers from 25 to 45, add low ET gap triggers (CJT(2,3) L3J(1,15)+GAP) FPD triggers still in future

More Related