1 / 9

Examcollection 300-135 Questions Answers

You can find the best study material from Examcollectionvce for 300-135 exam. Examcollectionvce is the leading brand which provides you excellent stuff content and questions answers in PDF & Engine format. <br>We are here to give you 100 % accurate and real Exam questions. We assure you will pass your exam in first attempt. <br>Visit us for further detail and latest exam questions. Get complete file from here<br>http://www.examcollectionvce.com/vce-300-135.html<br><br><br>

jenifer2426
Télécharger la présentation

Examcollection 300-135 Questions Answers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PASS YOUR EXAM IN FIRSTATTEMPT CISCO300-135 http://www.examcollectionvce.com/vce-300-135.html

  2. QUESTION1: When troubleshooting an EIGRP connectivity problem, you notice that two connected EIGRP routers are not becoming EIGRP neighbors. A ping between the two routers was successful. What is the next thing that should bechecked? Verify that the EIGRP hello and hold timers matchexactly. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP peercommand. VerifythatEIGRPbroadcastpacketsarenotbeingdroppedbetweenthetwo routers with the show ip EIGRP trafficcommand. Verify that EIGRP is enabled for the appropriate networks on the local and neighboringrouter. Answer:D QUESTION2: Which IPsec mode will encrypt a GRE tunnel to provide multiprotocol support and reducedoverhead? 3DES multipointGRE tunnel transport Answer:D QUESTION3: Which three features are benefits of using GRE tunnels in conjunction with IPsec for building site-to-site VPNs? (Choosethree.) allows dynamic routing over thetunnel supports multi-protocol (non-IP) traffic over the tunnel reduces IPsec headers overhead since tunnel mode isused simplifies the ACL used in the cryptomap uses Virtual Tunnel Interface (VTI) to simplify the IPsec VPNconfiguration http://www.examcollectionvce.com/vce-300-135.html

  3. Answer: A, B,D QUESTION4: Which statement is true about an IPsec/GREtunnel? The GRE tunnel source and destination addresses are specified within the IPsec transformset. An IPsec/GRE tunnel must use IPsec tunnelmode. GRE encapsulation occurs before the IPsec encryptionprocess. Crypto map ACL is not needed to match which traffic will beprotected. Answer:C QUESTION5: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been operated indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to Isolated the cause of this fault and answer the following questions. On which device is the fault conditionlocated? R1 R2 R3 R4 DSW1 DSW2 ASW1 H.ASW2 Answer:G http://www.examcollectionvce.com/vce-300-135.html

  4. QUESTION6: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to whichtechnology? NTP Switch-to-SwitchConnectivity AccessVlans PortSecurity VLAN ACL / PortACL Switch VirtualInterface Answer:B QUESTION7: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition? R1 R2 R3 R4 DSW1 DSW2 http://www.examcollectionvce.com/vce-300-135.html

  5. ASW1 ASW2 Answer:G QUESTION8: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241address.Usethesupportedcommandstoisolatedthecauseof this fault and answer conditionlocated? R1 R2 R3 R4 DSW1 DSW2 ASW1 ASW2 Answer:A the following questions. On which device is the fault QUESTION9: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241address. http://www.examcollectionvce.com/vce-300-135.html

  6. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to whichtechnology? BGP NTP IPNAT IPv4 OSPFRouting IPv4 OSPFRedistribution IPv6 OSPFRouting IPv4 layer 3security Answer:D QUESTION10: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. On which device is the fault conditionlocated? R1 R2 R3 R4 DSW1 DSW2 ASW1 Answer:A http://www.examcollectionvce.com/vce-300-135.html

  7. Fullcourse coverage 100% Latest examcollection 300-135Dumps PDF & Test Engine 6 MonthsCisco Exam VCE Update 100%passing Guarantee 100% MoneyBack Assurance Answers Verifiedby Experts http://www.examcollectionvce.com/vce-300-135.html

  8. A Complete File From Here “http://www.examcollectionvce.com/vce-300-135.html” http://www.examcollectionvce.com/vce-300-135.html

  9. http://www.examcollectionvce.com/vce-300-135.html

More Related