1 / 18

Class Report

Class Report. 馬睿峰 : Multirate Signal Processing Introduction. Multirate Signal Processing. Sampling rate conversion : The process of converting a signal from a given rate to a different rate Multirate Systems : Systems handling more than one sampling rate

joan-gross
Télécharger la présentation

Class Report

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Class Report 馬睿峰 : Multirate Signal Processing Introduction

  2. Multirate Signal Processing • Sampling rate conversion: The process of converting a signal from a given rate to a different rate • Multirate Systems: Systems handling more than one sampling rate • Objective: Minimize the complexity of the signal processing under Nyquist Sampling criterion • Key Operations: Sampling rate conversion for communications -- Decimation: Down sampling at receiver side -- Interpolation: Up sampling at transmission side • DSP Functions: Decimation Filtering Interpolation Filtering

  3. Why and Where to Use Multirate • Multirate systems can reduce required system computation, bandwidth, or storage requirements • Multirate systems are used for converting data between A/D and D/A devices that run at different sampling rates • Common multirate applications: • Sampling systems • Audio/speech encoders • Image/video encoders • Music synthesizers • CAT scan, image systems • Echo cancellers • Modems, data multiplexers

  4. Sampling Rate Conversion • It is often advantages to digitally alter the sampling rate during processing, after the initial A/D conversion has been finished: • High sampling rates (perhaps many times the Nyquist rates) can be used to help remove noise and quantization error • Low sampling rates (near the Nyquist rate) are best for computation speed and memory requirements

  5. Sampling – Time Domain (Multiplication)  Analog to digital conversion process: s(t) xc(t) x[n] xc(t) s(t) x[n] = xc(nt)

  6. Sampling – Frequency Domain (Convolution)  If a continuous signal xc(t) is band limited with |Xc(j)| = 0, for ||  2Fc, then xc(t) can be uniquely reconstructed without error, if Fsam  2Fc, where Fsam= 1/T is the sampling frequency. Xc(j) -2Fc 0 2Fc  S(j) -2F -F 0 F=2F  Xc(j)  S(j) 0 

  7. Aliasing (Under Sampling)  Fourier transform of continuous-time signal -/T /T  Fourier transform of sampled signal -   2 -2 High Frequency noise

  8. Multirate Antialiasing Filter Analog LPF Digital LPF 3 A/D 4

  9. Sampling and Reconstruction Sampling Reconstruction Nyquist sampled Under sampled Nyquist Condition:

  10. Multirate signal processing - Decimation The M-fold decimator : The M-fold decimator which takes an input sequence x(n) and produces the output sequence y[n] = x[Mn] where M is an integer. Only those samples of x[n] which occur at time equal to multiples of M are retained by the decimator . x[n] w[n] y[m] h[n] M F F F’ Over-sampled signal Decimated signal 3 to 1 decimation time time 0 0

  11. Decimation • The decimator is also called as downsampler , subsampler, sampling ratecompressoror merely acompressor • Aliasing can be avoided if x[n] is a lowpass signal bandlimited to the region |  | < /M • In most applications ,the decimator is preceeded by a lowpass filter called the decimation filter . The filter ensures that signal being decimated is bandlimited

  12. Decimation by Integer Factor x[n] w[n] y[m] h[n] M F F F’ Time-domain input-output relation: Frequency-domain input-output relation: Idea frequency response of decimation filter:

  13. Decimation by Integer Factor x[n] w[n] y[m] h[n] M F F F’ |X(ej)| F 0  2 |H(ej)| F 0 /M  2 |W(ej)| F 0 /M  2 |Y(ej’)| F’=F/M 0  2 4 6

  14. Interpolation by Integer Factor Definition: A up-sampler with an up-sampling factor L. The aim is to get a new sequence with with a higher sampling frequency without changing the spectrum. y[m] w[m] x[n] L h[m] F’ F F’ 1 to 3 interpolation time time             0 0

  15. Interpolation by Integer Factor y[m] w[m] x[n] L h[m] F’ = L  F F F’ Time-domain input-output relation: Frequency-domain input-output relation: Idea frequency response of Interpolation filter:

  16. Interpolation by Integer Factor y[m] w[m] x[n] L h[m] F’ = L  F F F’ |X(ej)| 0  2 |W(ej’)| F’ /L  0 2 |Y(ej’)| F’ 0 /L  2

  17. Conversion by Rational Factor M/L Interpolation by L Decimation by M x[n] y(m) s[k] h1(k) L h2(k) M F F’ = (L/M)F F”=LF x[n] y[m] h(k) L M F F”=LF F” F’ = (L/M)F

  18. References of Multirate Signal Processing • Ronald E. Crochiere and Lawrence R. Rabiner, Multirate Digital Signal Processing, Prentice Hall, 1983. • P. P. Vaidyanathan, Multirate Systems and Filter Bank, Prentice Hall, 1993. • P. P. Vaidyanathan, Multirate Digital Filters, Filter Banks, Polyphase Networks and Applications: A Tutorial, IEEE Proceeding, Vol.78, Jan. 1990.

More Related