1 / 11

EVM-Electronic Voting Machine

EVM-Electronic Voting Machine. EVM-Electronic Voting Machine. Introduction.

juanjohnson
Télécharger la présentation

EVM-Electronic Voting Machine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EVM-Electronic Voting Machine

  2. EVM-Electronic Voting Machine Introduction • The project is designed for eight contestants. Voters can poll their vote to any one of the contestant. In this project, one port is dedicated for 8 push-button switches for eight contestants, and a master switch for polling officer. A simple yet powerful program is written in assembly language and is burnt onto the microcontroller to accept votes and to keep counting the total votes polled. A Polling-officer switch (master) is provided to avoid multiple polling by a single voter. Every voter  gets approval from the polling officer. If the polling officer issues approval with his control switch, then only the voter can poll his vote. http://www.edgefxkits.com/

  3. EVM-Electronic Voting Machine Block Diagram http://www.edgefxkits.com/

  4. EVM-Electronic Voting Machine Hardware Requirements • 8051 series Microcontroller • Push Buttons • Transistors • Transformer • Voltage Regulator • LED • LCD • Resistors • Capacitor • EEPROM • Buzzer http://www.edgefxkits.com/

  5. EVM-Electronic Voting Machine Software Requirements • Keil C compiler • Languages: Embedded C or Assembly http://www.edgefxkits.com/

  6. EVM-Electronic Voting Machine Software Requirements • Keil C compiler • Languages: Embedded C or Assembly http://www.edgefxkits.com/

  7. EVM-Electronic Voting Machine Microcontroller 8051 • Microcontroller 8051 is designed in 1980’s by Intel. • It is a computer on chip type. • It is 40 pin dip type ic. • It is designed for performing special type operation to do specific jobs. http://www.edgefxkits.com/

  8. EVM-Electronic Voting Machine Microcontroller 8051 • It has four sets of i/o pins which can be used both input and output operations. • It contains four ports. • Each port contains 8 pins. • The pin configuration is shown below http://www.edgefxkits.com/

  9. EVM-Electronic Voting Machine Pin diagram of 8051 http://www.edgefxkits.com/

  10. EVM-Electronic Voting Machine Pin diagram of 8051 • Pins 1-8:it is said to be port 1 and it is used for input/output operations. • Pin 9 is a reset pin. • Pins 10-17: it is port 3 is also used for input/output operations but specially it has alternate operations • Pin 10(RXD): - Serial asynchronous communication input or Serial synchronous communication output. http://www.edgefxkits.com/

  11. Interesting, right? This is just a sneak preview of the full presentation. We hope you like it! To see the rest of it, just click here to view it in full on PowerShow.com. Then, if you’d like, you can also log in to PowerShow.com to download the entire presentation for free.

More Related