1 / 16

Chapter 2

Chapter 2. Basic laws. Some Basic Concepts. Branch----- A branch represents a single element such as a voltage source or a resistor. {But usually we think a branch as a path flowing the same current. So maybe includes more than one element.}. Some Basic Concepts.

kail
Télécharger la présentation

Chapter 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 2 Basic laws SJTU

  2. Some Basic Concepts • Branch----- A branch represents a single element such as a voltage source or a resistor. {But usually we think a branch as a path flowing the same current. So maybe includes more than one element.} SJTU

  3. Some Basic Concepts • Node-------A node is the point of connection between two or more branches • Loop-------A loop is any closed path in a circuit. • Mesh------A mesh is a loop which does not contain any other loops within it. SJTU

  4. KIRCHHOFF’S LAWS • Kirchhoff’s Current Law (KCL): The algebraic sum of currents entering a node (or a closed boundary) is zero. (Based on the law of conservation of charge) The sum of the currents entering a node = the sum of the currents leaving the node. SJTU

  5. KCL also applies to a closed boundary. Note: 1) KCL is available to every node at anytime. 2) KCL is related only to the currents instead of the elements. 3) Pay attention to the current direction. SJTU

  6. KIRCHHOFF’S LAWS • Kirchhoff’s Voltage Law (KVL): The algebraic sum of all voltages around a closed path (or loop) is zero. (Based on the principle of conservation of energy) To illustrate KVL, consider the circuit : V1-V2-V3+V4-V5=0 or V2+V3+V5=V1+V4 Sum of voltage drops=Sum of voltage rises SJTU

  7. TWO SORTS OF CONSTRAINTS • 1.Topological constraints Determined by the way of connection among the elements. (Such as KCL KVL) 2. Element constraints Determined by the elements. (VAR) Using two sorts of constraints, we can analysis any lumped circuit (solve out all the voltages and currents). SJTU

  8. In a circuit with b branches and n nodes, there are 2b variables should be valued. Then: KCL for n nodes: only n-1 equations are independent. KVL for loops: only b-n+1 equations are independent. (only KVL for meshes) VAR for branches: b equations. So, (n-1)+(b-n+1)+b=2b, 2b equations to value 2b variables. That is called 2b analysis. SJTU

  9. SERIES RESISTORS AND VOLTAGE DIVISION • As we know, Series-connected means that the same current flows in them.   • The equivalent resistance of any number of resistors connected in series is the sum of the individual resistances. See illustration with 2 resistors: R is the equivalent resistance. It can be applied to any number of resistors SJTU

  10. The equivalent power of any number of resistors connected in series is the sum of the individual powers. Concept of Equivalent: Be equivalent to the outside, not the inside. Principle of voltage division:if a voltage divider has N resistors(R1,R2,…RN) in series with the source voltage v, the nth resistor(Rn)will have a voltage drop of SJTU

  11. G PARALLEL RESISTORS AND CURRENT DIVISION • As we know, Parallel-connected means that the same voltage covers over them.  • The equivalent conductance of resistors connected in parallel is the sum of their individual conductances. See illustration with 2 resistors: G G is the equivalent conductance. It can be applied to any number of resistors SJTU

  12. The equivalent power of any number of resistors connected in parallel is the sum of the individual powers. Principle of current division If a current divider has N conductors (G1,G2…GN) in parallel with the source current i, the nth conductor (Gn) will have current SJTU

  13. MIXED CONNECTION AND ITS EQUIVALENT RESISTANCE Examples (we combine resistors in series and in parallel) SJTU

  14. d e WYE-DELTA TRANSFORMATIONS Situations often arise in circuit analysis when the resistors are neither in parallel nor in series. R12=? SJTU

  15. WYE-DELTA TRANSFORMATIONS Y Y   SJTU

  16. 2 1 d e 3 So Can you imagine another way of transformation? SJTU

More Related