1 / 5

Automation Totalflow Measurement & Control Systems Electrical Classifications

Automation Totalflow Measurement & Control Systems Electrical Classifications. Model 6410 Model 6411 Model 6413 Model 6414. Model 6713 Model 6714 All options included in Div.2 Drawing 2015246 & Div. 1 Drawing 2015267 (Supplied). Electrical Classification.

kalani
Télécharger la présentation

Automation Totalflow Measurement & Control Systems Electrical Classifications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Automation Totalflow Measurement & Control Systems Electrical Classifications

  2. Model 6410 Model 6411 Model 6413 Model 6414 Model 6713 Model 6714 All options included inDiv.2 Drawing 2015246 & Div. 1 Drawing 2015267 (Supplied) Electrical Classification The following models are certified by NRTL/C for both Class 1,Division 1 and 2, Groups C&D

  3. Typical Installation Drawings based on Electrical Classification Safe Area Class 1 Division 1 Location Radio Enclosure with safety Barrier Class 1 Division 2 Location Conduit $$ Radio mounted inside FCU enclosure $

  4. Electrical Parameters • AAI Document 2015246-CD (Div.2) and 2015267-CD are NRTL controlled documents • All approved AAI options are specified within these two documents • Several approved third party devices including radios, samplers and safety barriers are listed

  5. Non-Incendive and Entity Parameters • Our equipment is rated intrinsically safe per ANSI/ISA S12.12 U.S. standard • Nonincendive parameters for all inputs and outputs have been specified Example Voc (Voltage open circuit) Isc (Current short circuit) Ca (Capacitance attached) La (Inductance attached) Vmax (Voltage Maximum) IMax(Current Maximum) Ci (Capacitance internal) Li (Inductance internal) Digital Output Digital Input

More Related