1 / 19

The Cooling Airflow of Heavy Trucks - a Parametric Study

The Cooling Airflow of Heavy Trucks - a Parametric Study. Thomas Hällqvist, Scania CV AB. 2008-01-1171. Company Logo. Introduction. Study of the influence on the cooling airflow from various installation parameters on a Heavy duty truck. Analysis performed by means of 3D CFD.

kale
Télécharger la présentation

The Cooling Airflow of Heavy Trucks - a Parametric Study

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Cooling Airflow of Heavy Trucks - a Parametric Study Thomas Hällqvist, Scania CV AB 2008-01-1171 Company Logo

  2. Introduction • Study of the influence on the cooling airflow from various installation parameters on a Heavy duty truck. • Analysis performed by means of 3D CFD. • The focus of the paper is on the system pressure loss, flow distribution and cooling capacity. 2008-01-1171

  3. Physical Model • Complete 2-axle tractor. • Air enters in the front via mesh screens. • Cooling package includes: • Condensor • Oil cooler • EGR cooler • CAC cooler • Radiator Pictures show the surface mesh 2008-01-1171

  4. Physical Model • Fan diameter of 750 mm (default). • Fan placement depends on engine type. • Both V8 and inline six engines are considered. • High level of details in the engine compartment. Pictures show the surface mesh 2008-01-1171

  5. Simulation Technique • 3D isothermal CFD simulation. • LBM solver by EXA corp. • Coupling to 2D heat exchanger calculation. • Fan modeled via MRF. • Heat exchangers and mesh screens modeled as porous media. 2008-01-1171

  6. Model Size and Accuracy • Statistical convergence within <1 %. • Absolute accuracy within 6 % for massflow (rel. MP). • 40-50·106 volume elements. • Simulated on 128 cpu’s Linux cluster. • Total runtime of approx. 22-30 h. data sampling interval 2008-01-1171 MP: Micro Probe measurements

  7. General Boundary Conditions • Virtual windtunnel with moving ground. • Windspeed of 30 km/h. • Ambient temperature of 25°C. • Fan speed of 1700 rpm. L = 170 m W = 60 m H = 45 m outlet inlet 2008-01-1171

  8. Parameter Variations • Front opening area. • Fan-to-radiator spacing. • Fan-to-engine spacing. • Width of cooling module. • Fan diameter. • Fan projection into shroud. 2008-01-1171

  9. Results • Study of the impact from various parameter settings on: • the flow character, • the total pressure loss, • the flow distribution through the radiator, • the cooling capacity. 2008-01-1171

  10. Results: general flow character • The underhood includes different subsystems. • Subsystems installed in serial or in parallel. • The fan shroud has large influence on the pressure loss. • All subsystems, but the HX’s, must be optimized w.r.t dP. • A HX with large dP generally comes with large heat transfer capacity. Fan shroud Cooling pacakge RAD 2008-01-1171

  11. Results: general flow character • Airflow enters via the front. • Static pressure decreases until the fan, where the pressure is build up to Pamb + dPrear underhood. • Three main flow directions below the cab. • Flow also underneath the engine. 2008-01-1171

  12. Results: general flow character Inline-six setup V8 setup Inline-six setup (S6) V8 setup • V8: fan in high position • S6: fan in low position • Fan placement and engine type influences the flow distribution. • V8: Fan on top of crossmember. • S6: Fan in front of crossmember. • Strong influence on dP below the engine. 2008-01-1171

  13. Results: fan-to-radiator spacing V8 setup Inline-six setup Case REF* • Fan shrouds with different depths tested. • Default setup V8 has a deeper shroud. • dx more critical for S6-cases. • At same depth the V8 setup features higher dPtot than S6. 2008-01-1171

  14. Results: fan-to-radiator spacing V8 setup • dx also influences the flow distribution. • So also the shape of the shroud. • Bad uniformity for RAD  higher dPRAD. 2008-01-1171

  15. Results: fan diameter / width of RAD V8 default case setup 20 % larger fan 20 % wider cooling package uniformity = 0.87 (Case NF) uniformity = 0.88 uniformity = 0.91 • The geometrical shape of the fan shroud influences the flow distribution. • A wide cooler gives low flow rates in the outer regions. • A larger fan improves the uniformity. • A larger fan can geometrically be compared to a deeper fan shroud. 2008-01-1171

  16. Results: fan projection into shroud axial fan behavior leak flows • FPiS determines the flow direction behind the fan. • FPiS should be tuned for each specific installation. • Large FPiS  axial fan behavior, high dP for large engine silhouette. • Small FPiS  radial fan behavior, high rates of leak flows. • The smaller fan-tip to fan-ring spacing the smaller FPiS is possible. 2008-01-1171

  17. Results: cooling performance (1/CC) Influence from massflow Influence from flow uniformity • The flow uniformity has some effect on the cooling performance. • The character of the flow distribution is also relevant. non-uniform flow uniform flow • Within the present interval the cooling performance has a linear relation to the massflow. • The non-uniform and the uniform flow show the same trends. 2008-01-1171

  18. Conclusions • The underhood involves several subsystems. • The design of the fan shroud is crucial. • The flow distribution is important w.r.t. to dP. • For the cooling performance the massflow is of main importance, uniformity of less.

  19. Future Work • Additional parameter settings. • Extend the study w.r.t. fan configuration. • Study the effect from fan modeling. • Extend the thermodynamic analysis.

More Related