1 / 16

第三章 三角形的解法

第三章 三角形的解法. 3-1 正弦定理 3-2 餘弦定理 3-3 三角形的解法 3-4 三角測量. 回總目次. 3-1  正弦定理. 1. 定理中慣用的表示方法 2. 正弦定理 3. 三角形的面積求法 1 4. 三角形的面積求法 2 5. 三角形的面積求法 3. 在 △ ABC 中,三內角∠ A ,∠ B ,∠ C 的對邊通常以 a , b , c 來表示。 2. R : △ ABC 外接圓半徑。 3. r : △ ABC 內切圓半徑。 4. s : △ ABC 周長的一半,即 s = 。.

kalin
Télécharger la présentation

第三章 三角形的解法

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 第三章 三角形的解法 • 3-1 正弦定理 • 3-2 餘弦定理 • 3-3 三角形的解法 • 3-4 三角測量 回總目次

  2. 3-1 正弦定理 1. 定理中慣用的表示方法 2. 正弦定理 3. 三角形的面積求法1 4. 三角形的面積求法2 5. 三角形的面積求法3

  3. 在△ABC中,三內角∠A,∠B,∠C的對邊通常以a,b,c來表示。在△ABC中,三內角∠A,∠B,∠C的對邊通常以a,b,c來表示。 • 2. R:△ABC外接圓半徑。 • 3. r:△ABC內切圓半徑。 • 4. s :△ABC周長的一半,即 s =。 正弦定理中慣用的表示方法

  4. a,b,c分別表△ABC中,∠A,∠B,∠C的對邊,則a,b,c分別表△ABC中,∠A,∠B,∠C的對邊,則 1. 2R 2. a:b:c = sinA:sinB:sinC 正弦定理

  5. △ABC面積= ab sin C = bc sin A = ca sin B 三角形的面積求法1

  6. △ ABC面積= 由正弦定理 ,再由三角形 的面積求法1得△ ABC面積=ac sin B = ac = 三角形的面積求法2

  7. △ABC面積=rs r為△ABC內切圓的半徑,如圖 △ABC面積= △ABO+ △BCO+ △ACO = cr+ ar+ br = r ( ) = rs 三角形的面積求法3

  8. 3-2 餘弦定理 1. 餘弦定理 2. 海龍(Heron)公式

  9. 餘弦定理 a,b,c分別為△ABC中,∠A,∠B,∠C的對邊,則 a2 = b2 + c2− 2bc cosA b2 = c2 + a2− 2ca cosB c2 = a2 + b2 − 2ab cosC

  10. 已知三角形的三邊為 a,b,c,則 △ABC面積= ,其中s = 海龍(Heron)公式

  11. 3-3 三角形的解法 1. 何謂解三角形? 2. 三角形的解法

  12. 何謂解三角形?   在組成三角形的六個條件中,若已知三個條件(其中至少要有一個邊長),而求其他未知的三個條件,這種過程稱為解三角形。

  13. 三角形的解法 在解三角形的過程中 1. 若已知兩角及一邊(A.A.S.或A.S.A.)    先利用正弦定理。 2. 若已知三邊,或兩邊及其夾角(S.S.S或S.A.S.)    先利用餘弦定理。 3. 若已知兩邊及一對角(S.S.A.),其結果可能二解、 一解或無解。

  14. 3-4 三角測量 1. 測量常用的名詞1 2. 測量常用的名詞2

  15. 測量常用的名詞1 • 鉛垂線:將線的一端固定,另一端繫一重物,讓其自由下垂,則此垂線稱為鉛垂線。 • 水平面:垂直於鉛垂線的平面稱為水平面,水平面一般是指平行於地面的平面。 • 水平線:在水平面上的直線稱為水平線,水平線會平行於地平面。

  16. 測量常用的名詞2 4. 仰角:若目標物在水平線的上方,則目標物和觀測點的連線與水平線的夾角稱為仰角。 5. 俯角:若目標物在水平線的下方,則目標物和觀測點的連線與水平線的夾角稱為俯角。

More Related