1 / 10

Gravity Vehicle Science Olympiad 2012

Gravity Vehicle Science Olympiad 2012. Coaches Workshop October 22, 2011. Egg-less Scrambler. Similar to former event “The Scrambler” Come closest to reaching target Scoring based on time and distance Lowest score wins Distance announced after impound Braking mechanism can be employed

kat
Télécharger la présentation

Gravity Vehicle Science Olympiad 2012

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Gravity VehicleScience Olympiad 2012 Coaches Workshop October 22, 2011

  2. Egg-less Scrambler • Similar to former event “The Scrambler” • Come closest to reaching target • Scoring based on time and distance • Lowest score wins • Distance announced after impound • Braking mechanism can be employed • No electrical components • Major Differences: • Propelled only by its own mass (gravitational potential energy) • Teams must build ramp with release mechanism

  3. Construction: The Ramp • Material: smooth to reduce friction (waste energy) • Plastic, metal, wood, plexiglas, etc • Too smooth=bad tracking • Ideally adjustable • Perhaps hinged to adjust slope (i.e. lounge chair) • Shape: Where is mass concentrated? • Flat- simple design, easily adjustable • Curved- maximize PEg

  4. Construction: Vehicle— Chassis • Rigid is good– propulsion will cause stress • Material: plastic, wood, metal, plexiglas, etc • Structure: flat board, box style… • Make sure axles are ‘square’ to direction of travel and parallel to each other • Design idea: • Build car in 2 halves with bolt connecting axles

  5. Construction: Vehicle — Axles • Rigid and straight • Crooked axle = crooked path • Materials: wooden/plastic dowels, metal rods • Axle-Chassis attachment: • 1.) Drill holes in chassis, feed axle through • 2.) Attaches tubes to chassis– straws

  6. Construction: Vehicle — Wheels • Friction is the enemy • Straight and light-weight • Ideas: • CDs- spin well, but need traction • Strips of latex balloon • Hobby airplane wheels • Home-made– only if perfectly circular • How many? 3 or 4? • Thick or thin? • Depends on chassis design

  7. Braking — General Principles • Braking mechanism can’t be used to propel vehicle • Don’t lose contact/normal force • Higher normal force=faster braking • Keep center of mass closer to front axle • Minimize Skidding • Kinetic friction dependent wheel-surface friction instead of braking mechanism • Decreases stability • Fix it by relocating/adding mass- modeling clay • Brake pads for smoother stops • Too much brake=Newton’s 3rd Law • Take tips from Scrambler

  8. Construction:Braking Systems — String Method String from one axle unwinds and wraps around the second axle. Fed through, axles lock, car stops. Distance traveled controlled by the amount of string. • Easy construction • Easy to implement • Easy length adjustment • Poor accuracy • wrapping variation • Backlash • When string goes taut • Skid • Relies on wheel traction

  9. Construction:Braking Systems — Threaded Rod Method Uses a threaded rod for the axle, wing nut on the axle. Rotation of wheels = horizontal motion wing nut. Wing nut reaches a barrier, stops the axle. Distance set by wing nut placement. • High accuracy • Consistency • Easy length adjustment • Little backlash • Harder to build • Axle friction • Skid

  10. General Tips • Test on various surfaces—gym floors, hallway tile • Chart data for each; better idea on race day • Clean floor— dirt/dust affects braking • Calculations– divide race length by wheel circumference to get # of rotations • TEST and TEST AGAIN! • Don’t DQ! Read rules carefully • Dimensions include starting point • Release mechanism- actuated by pencil • No loose pieces • Vehicle mass < 2.500 kg • Have fun! • Event Coordinator: Betsy White– bwhite6@utk.edu

More Related