Institute of Metrology and Quality Assurance Testing

1. ÚMZ Institute of Metrology and Quality Assurance Testing Technická 2896/2 616 69 Brno Czech Republic tel: +420 541 14 2411 fax: +420 541 14 2104 e-mail: vladimir.pata@seznam.cz web: www.umz.fme.vutbr.cz Made by doc.Dr.Ing.Vladimír Pata Secretaryof Institute of Metrology and Quality Assurance Testing

2. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ • Introduction of institute and its department’s classification • Presentation of environment for teaching and research • Crucial teaching procuring by Institute of metrology and quality assurance testing internally and for other Institute of Faculty of mechanical engineering • Short introduction of study’s field • Detailed description of science and research realized by Institute of metrology and quality assurance testing • Introduction of the most important projects resolved by Institute of metrology and quality assurance testing • Well-arranged demonstration of selected projects resolved in Institute of metrology and quality assurance testing (included cooperation with other Institutes of Faculty of mechanical engineering) • Partnership cooperation of Institute of metrology and quality assurance testing and created contacts • Ideas and suggestions for future development of Institute of metrology and quality assurance testing Warp of presentation Symbols for presentation operating Previous page( PgUp) Following page (PgDn) Passage to Info-page

3. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Stall of Institute • Branch of Quality management & • Branch of Metrology and engineering inspection Labs • Teaching laboratory of practical metrology • Laboratory of special and laser metrology • „Floating laboratory" • Laboratory of scaning high speed process (in realization) • Multimedia computerized classroom

4. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Workers • Professor 2 • Senior lecturer5 • Assistant professor / assistant 6 • Technicall staff 4 Students • PhD students 14 • Specialization students cca. 40 in academic year

5. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Laboratory of practical metrology Area for teaching Support fundamental education metologie longitude, angles and temperature. Further verification cogged wheels, thread, calibre,surface texture and statistical process controll. At metering in education is in maximum measurement realized doctrinal progress , it entails cohesion wireless transmission measured data and picture with appropriate programmatic equipment and data projector.

6. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Laboratory of special and laser metrology Area for teaching and research Clinching tutorial and research in the area metrology textures surfaces, optical metrology, metrological lengths by the help of laserinterferometru, tangent and contactless scan vibration (realized in conjunction with Institute of automatization and information science)

7. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ „Floating laboratory equipment by double stage air-conditioning" Area for teaching and research Serve for realization research and special tutorial (in terms of doctor's studies and realization diploma work washing) in the area metrology textures surfaces, deviation recontouring and position etc . contactless measuring textures surfaces is realized in conjunction with Institute of physical engineering.)

8. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Multimedial computer classroom Area for teaching It serves first of all to information of students with modern software as from metrology so from quality management areas. Article of inventory computer schoolroom is mathematic-statistic software (e.g. Minitab) and 3D graphics system SolidWorks.

9. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ • Realized in Institute of metrology and quality assurance testing • Basic courses Mechanical metrology I and II, Computer’s support of metrology, Quality control, Statistical control of production process, Control of security and risk, Certification and technical normalization, European law in industrial practice • Realized by Institute of metrology and quality assurance testing for other Institute of Faculty of mechanical engineering • Institute of mathematics engineering, Institute of physics engineering,Institute of Machine and Industrial Design, Institute of Manufacturing Technology, Institute of Production Machines, Systems and Robotics, Institute of Transport Engineering • Teaching in field of study in Ph.D. study • Possibility of study’s continuation in Ph.D. program “Metrology and quality assurance testing (3920V)“ and obtaining of Ph.D. degree Crucial teaching Branches • Branch of Quality management & • Branch of Metrology and engineering inspection

10. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Branches Metrology and Quality assurance The institute of Metrology and Quality Assurance testing is self-dependent scientific and educational work place.The institute ensures the development of new disciplines in area of metrology. The institute guarantees a high professional standard of bachelors, masters, Ph.D. students and other educational forms study. Quality management Quality is degree to which a set of inherent characteristics fulfils customer requirements. Mission of branch is assertion of philosophy Total quality management also in reliability and safety areas. Branch prepares specialists with new practice requirements developed knowledge. It completes education for specialists from industry. It provides consulting, solving and evaluation of projects for industry companies.

11. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ • Evaluation of the Component Surface Texture • Evaluation of Shape and Bearing Deviations • Evaluation the Residual Stresses in the Surface Layer • Application of laser-interferometry for linear and angular measurement and for dynamic data capture and analysis • Evaluation of verification processes • Scaning high speed process (in realization) • Collaboration with conservation centre of TMB • Major accident selection in industrial area • Systematical hazard identification an operability studies • Enviromental risk assessment for underground water • Consequences Estimation • Certification systems and accreditation condition • Acquis communautaire and its application Science and research

12. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ • European social foundation reg. № CZ.04.1.03/3.2.15.2/0291: Courses of further education for methodic-management authorities in quality management systems, environment management systems and occupational health and safety management systems. Assoc. Prof. Tes. • GAČR reg.no. 101/02/0770: Evaluation of Deformation Behaviour of the Materials During Cutting and Possibilities of its Utilization for Determination the Dynamic Properties of the Materials, doc.Bumbálek • GAČR reg.no.101/02/0802: The Influence of the Cutting Methods on the Residual Stresses in the Surface Layer and their Influence on Fatigue, doc.Bumbálek • GAČR reg.no.101/06/0490: Scanning and Surface Texture Analysis of Emerging Materals for Controlled Highly Precise Technological Methods, doc.Bumbálek The most important resolved projects

13. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Realizované konference a symposia ÚMZ, resp.podílení se na jejich přípravě Doc.Pata • National conference „Konferenčního setkání uživatelů systému SolidWorks“, Brno 2000-2004, ČR • Scientific commettee of international conguess Loss Prevention and Safety promotion in the Process Industries, Prag 2004 • Member of scientific commitee of 42nd International Petroleum Conference, Slovnaft VÚRUP, a.s., Bratislava, SR, 2005 • Member of scientific commetee Reliabiliti in Chemical Industry, Slovnaft VÚRUP, a.s., Bratislava, SR, 2005 • Tutor of internation symposium TD Diagon, 2004 – 2006, Zlín, Czech Republic • Realized professional conferences “Quality and company communication”, Brno, CZ, in years 2000 - 2005 Prof.Babinec Doc.Fiala

14. ÚMZ Institute of Metrology and Quality Assurance Testing Contact Evaluation of the Surface Texture – 2D www.umz.fme.vutbr.cz/ Demonstration of selected resolvedprojects

15. ÚMZ Institute of Metrology and Quality Assurance Testing Non-contact Evaluation of the Surface Texture - 3D www.umz.fme.vutbr.cz/ Ground surface Selected examples of solving projects Buffed surface

16. ÚMZ Institute of Metrology and Quality Assurance Testing Evaluation Roundness and Cylinder Deviations www.umz.fme.vutbr.cz/ Selected examples of solving projects

17. ÚMZ Institute of Metrology and Quality Assurance Testing Evaluation the Residual Stresses in the Surface Layer www.umz.fme.vutbr.cz/ Selected examples of solving projects

18. ÚMZ Institute of Metrology and Quality Assurance Testing Verification of micro-parts of keybord of notebook Acer by digital measuring microscope www.umz.fme.vutbr.cz/ Selected examples of solving projects Verification part Pin-heag for comparision of size

19. ÚMZ Institute of Metrology and Quality Assurance Testing Selecting key proportions parametres of control sheed of mechanical musical box type Manopan www.umz.fme.vutbr.cz/ Selected examples of solving projects The project is solved together with VUT FSI and Technical museum Brno

20. ÚMZ Institute of Metrology and Quality Assurance Testing Kinematic 3D model of cylinder musical box Paillard (Switzerland 1887) www.umz.fme.vutbr.cz/ Selected examples of solving projects Kinematic 3D model was made for information system of Technical museum Brno on graphical platform SolidWorks

21. ÚMZ Institute of Metrology and Quality Assurance Testing Example of scenarios development of unawares matters www.umz.fme.vutbr.cz/ Selected examples of solving projects For playback of video-continuity click on videoarea

22. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ • Fy Renishaw, s.r.o. Exchanging of skills, excursions,calibrations • Fy IMECO, s.r.o. Representative fy Taylor Hobson, Leicester, UK – lecturing • Český metrologický institut Committee on certification industrialists in metrological area • Český normalizační institut Expert´s testimony • Technické muzeum v Brně Collaboration in area renovation of technical mechanisms • Mesing Brno, spol s.r.o. Procucer of measuring instruments – Expert´s testimony • Komutex, spol. s.r.o. Expert´s testimony • TÜV CZ s.r.o. Expert´s testimony • Institut výchovy bezpečnosti práce Brno • Spolupráce s podniky Collaboration with firms (The area of hazard analysis) Lovochemi, a.s., Lovosice Spolana, a.s., Neratovice Slovnaft, a.s., Bratislava LZ Draslovka, a.s.,Kolín Deza, a.s., Valašké Meziříčí Partnership cooperation

23. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ • Loughborough University of Technology, Loughborough, UK • Dublin City University, Dublin, Ireland • Universita della technologia,Pisa, Italia • Technische Universität Wien, Austria • Polytechnika Swietokrzzyska, Institut technologii Maszyn Kielce • Slovenská technická universita v Bratislavě, Strojnická fakulta, Slovakia • Slovenský metrologický ústav Bratislava, Slovakia • MTF STU Trnava Katedra obrábania a montáže, Slovakia • TND Netherlands • TU Delft, Netherlands • VTT Tampere, Finland Contacts with international partners

24. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ Interest in Cooperation • Especially offer to: • Evaluating of metrology lengths, planeness and straightness • Verification of deviation recontouring and position • Evaluation of Surface Texture • Scan of highly fast phenomenon (in realization) • Calibration of gauges • Statistical inspection • I dentification of source diversification and risk rating • Simulation aftermath of unforseen event • Appreciation enviromentalnich impact of unforseen event • Consultancy in the area of prevention weighty breakdowns

25. ÚMZ Institute of Metrology and Quality Assurance Testing www.umz.fme.vutbr.cz/ • It will accurately conformable with „Longtime intention of development FSI" • Pilot imposition of UMZ is ensure satisfy conditions European social fund reg.No .CZ.04.1.03/3.2.15.2/0291 • Cavity roundness and cohesion system metrology, quality, credibility gap and safeness not only in scientific, but and practical areas • Instantaneous publication of research record in prestigious periodical • Laying all the time higher emphasis on independent creative activity student and repair of meaning for computational training and work with external original materials • Support equipment laboratory about new and modern arrangement and their instantaneous utilize in scholarship-pedagogic activities UMZ • Support scholarship-pedagogic growth worker and inceptorinstitution • Strengthening web boosters tutorial Future of Institute