1 / 7

Use of the unit impulse function

Use of the unit impulse function. The dump variation of the Dilution Problem. Problem Description. Remember the following Dilution problem: The inflow concentration c in [kg/m 3 ] of A is time varying The flowrate F [m 3 /s] is constant

kimball
Télécharger la présentation

Use of the unit impulse function

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BAE 3023 Use of the unit impulse function The dump variation of the Dilution Problem

  2. Problem Description BAE 3023 • Remember the following Dilution problem: • The inflow concentration cin [kg/m3] of A is time varying • The flowrate F [m3/s] is constant • The material A in the fluid is not reduced by reaction or other means in the tank • The Tank is well mixed • Find the outflow concentration cout [kg/m3] of A

  3. An Impulse as a rate BAE 3023 How can we deal with the situation where a bucket of component A were dumped into the tank at the inflow point? Where IA is the inflow rate of A and FBCB is the inflow rate of A from the bucket. The bucket of A dumped in would be so many kg of A but can be thought of as a rate of A. The unit impulse function is defined as follows and has a non-zero value only at d(0): and: Note that if d(t) has units of [kg A/s] that the integral of d(t) has units of [kg A]. The magnitude of the impulse is the mass of A.

  4. Impulse Input BAE 3023 For our tank, Md(t) [kgA/s] is the rate of A dumped into the tank from the bucket where M is the Mass of A in the bucket.

  5. Basic Equation BAE 3023 A mass balance for component A can be written Inflow rate of A - Outflow rate of A = Accumulation rate of A Subtracting this from the unsteady state equation above:

  6. Solution BAE 3023 Letting cin be at steady state (Cin=0) and rearranging, we get: Transforming:

  7. Graphical Response BAE 3023

More Related