1 / 6

LBT Q3 2007 Engineering Review

TAL Telescope Alignment. LBT Q3 2007 Engineering Review. Highlights and Progress(Q3/2007). Completed new alignment plans for rigid secondary and LBC Procured alignment telescope accessories and mounting brackets in preparation for Q4 alignment work.

kira
Télécharger la présentation

LBT Q3 2007 Engineering Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TAL Telescope Alignment. LBT Q3 2007 Engineering Review

  2. Highlights and Progress(Q3/2007) Completed new alignment plans for rigid secondary and LBC Procured alignment telescope accessories and mounting brackets in preparation for Q4 alignment work. Assessed Laser Tracker technology; selected vendor, awaiting budget decision. Determined that the blue hub is tilted to between 2 and 4 arc-minutes from September engineering observations. Confirmed that earlier assumptions on plate scale sensitivity to mirror separation were out by a factor of ~40 (in reality much 8 microns instead of 350+ microns). Proposed new single-pass null-test for adaptive secondaries. Supporting Michael Andersen’s efforts in the AGW unit specification document.

  3. Open Issues LBC Blue alignment can be improved. Possible to check hub alignment to GR axis using A-Scope. “Wall-eye” of PMs and other system flexures need to be quantified and checked against available correction ranges of optical elements. Again, the A-Scope set-up for LBC alignment can give some useful measurements of that. AGW support. FPIA sensitivity to focus and other low-order aberrations uncertain. Quantitative investigation underway with Zemax-modelled CCD’s. Awaiting budget decision on laser trackers, otherwise no large optics purchases anticipated for Q4-Q1.

  4. Progress Q2: Finalize LBC alignment procedure and improve image quality to the point that seeing limited images (on good nights) are achievable. • Alignment procedure finalized, alignment of LBC Red currently scheduled for November, possibly some Blue Hub alignment as well. Q2: Procure alignment equipment • Alignment telescope mounts and accessories purchased. Purchase of Laser Tracker in Q1 ‘08 if approved. Q2: Finalize and “publish” up-to-date Zemax models of various LBT modes • Work in progress, have working models of LBC Red, Blue and Gregorian modes. Q2: Continue with investigation of tolerances and compare results to measured system performance • Work in progress.

  5. Progress Q2: Work with software on collimation/pointing etc. • No outstanding software support issues, supporting MA for AGW work.

  6. Planning • Schedule • Alignment of LBC Red currently scheduled for November, possibly some Blue Hub alignment as well. • Purchase of Laser Tracker in Q1 ‘08 if approved. • Alignment of rigid secondary in Q1 ‘08. • Alignment of tertiary mirrors in Q4 ’07 (goal). • Assistance of MA ongoing. • FPIA investigation ongoing. • Publish global coordinate system for LBT (one exists already). • Publish various “final” Zemax models. • Resource • Assistance from Software, Engineering groups as well as various Germans, Italians and John Hill.

More Related