1 / 5

Jon Cann’s Material Division 7-Thermal and Moisture Protection 07 21 00 – Thermal Insulation

Jon’s Material. Why fiberglass insulation? Controls and slows down heat flow Reduces transfer of sounds through walls Easy to install Cheap Helps save more on heating and cooling bills. Jon Cann’s Material Division 7-Thermal and Moisture Protection 07 21 00 – Thermal Insulation

knut
Télécharger la présentation

Jon Cann’s Material Division 7-Thermal and Moisture Protection 07 21 00 – Thermal Insulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Jon’s Material • Why fiberglass insulation? • Controls and slows down heat flow • Reduces transfer of sounds through walls • Easy to install • Cheap • Helps save more on heating and cooling bills Jon Cann’s Material Division 7-Thermal and Moisture Protection 07 21 00 – Thermal Insulation Fiberglass acoustic blanket insulation

  2. Jon’s Material • Colors • Pink White • Yellow Green Sizes Many sizes with different widths and lengths

  3. Jon’s Material Installation • Tools needed: • Utility knife, pressure sensitive tape gloves, hard hat, safety glasses, mask • Stage of construction • Can install when exterior walls are done and sealed and when all mechanical piping is installed • Detail- Ceiling insulation over entire area extend insulation 48 inches up either side of partions and secure with cleats to structure • Face vapor barrier on heated side for exterior walls • Heights over 96 inches support unfaced mechanically and support faced by taping flanges of insulation to flanges • Two inches away from roof • Three inches from recessed light fixtures • Protect insulation with temporary covering if permanent construction is not installed immediately after • Insulation below grade use waterproofing • Preparation- clear anything harmful to insulation, anything that can puncture vapor barrier or interfere with insulation attachment • Physical Installation- Cut and fit insulation but only use single layer • Use mechanical anchorage for placement • Fasten blanket insulation between metal studs or framing with a continuous pressure sensitive tape along flanged edges

  4. Jon’s Material Cost Analysis Location Fiberglass insulation is located in interior walls and ceilings • Fiberglass Insulation ranges from $0.25 to $0.90 per square foot • For BBH: $0.59 psf for material $0.39 psf for labor Total Cost $0.98 psf Classroom 102 Rendering in classroom 102

  5. Jon’s Material • Storage and Handling • Away from weather and construction operations • Inside away from moisture • Approved Manufacturers • CertainTeed Corporation • Guardian Building Products, Inc. • Johns Manville. • Knauf Insulation. • Owens Corning Warranty One year limited warranty Warranty will cover and defects and problems caused by the production of the company Does not cover any damage that is made after delivery to the site

More Related