1 / 27

Electroactive Polymers

Electroactive Polymers. Electroactive Polymers Aaron Lubiszewski Jesse Gwynne Engr-45 Ataiiyan December 4, 2003. Introduction.

kpitre
Télécharger la présentation

Electroactive Polymers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electroactive Polymers • Electroactive Polymers • Aaron Lubiszewski • Jesse Gwynne • Engr-45 Ataiiyan • December 4, 2003

  2. Introduction Smaller, lighter, cheaper…these are three major concerns one must keep in mind when attempting to make improvements on existing technology. Electroactive polymers (EAPs) achieve all of these goals.

  3. Natural Polymers Wood Silk Cotton Wool Leather Rubber

  4. Hydrocarbons Hydrogen and Carbon Covalent Bonding Intermolecular Bonding hydrogen bonding van der wall forces

  5. Synthetic Polymers Plastics Rubber Fibers

  6. Structures Repeating structures called mers Comes from Greek work “meros” meaning part many mers = polymer Polymers are thousand or mer units long Can have elements other than Carbon and Hyrdogen….Fl, Cl, side groups

  7. Polymer Vocabulary All-the-same-mers = homopolymer a-couple-different-mers = copolymers two-ways-to-function-mers = bifunctional (chains) three-ways-to-function-mers = trifunctional (matrix)

  8. Fabrication of Polymers Chemical Reactions Catalyst Don’t have to be straight

  9. Types of Polymers Linear Branched Crosslinked Network

  10. Mechanical Properties Similar to metals Modulus of Elasticity…7 Mpa to 4Gpa Tensile strength…generally less than metals Percent Elongation…up to 1000% Most have yield strengths

  11. Stress vs. Strain for Polymers

  12. EAPs • A type of polymer that is affected by an applied electric field. • This affect may be in the form of deformation, movement, bending, or actuation . • Scientists and engineers envision using EAPs to replace a wide range of heavy, expensive, and power hungry equipment. • Existing EAPs fall into two main categories • electronic • ionic • Function similar to… • Piezoelectric materials • Shape memory alloys (SMAs)

  13. Ionic Polymers- Creation Polymers...Nafion, Flemion Infused conductive electrodes…Pt, Au Flow of ions create bending and swelling Positive ions attracted to negative electrode and visa versa Water creates medium for ion movement

  14. Ionic Polymer Types Ionic Polymer Gel (IPG) ions created from acidic environment Ionomeric Polymer-Metal Composite (IPMC) (+) “counter ions” and negative fixed ions are imbedded in matrix Conductive Polymers (CP) redox reactions exchange ions with electrolyte Carbon Nanotubes (CNT) ions change bond length to create movement

  15. Polarization of an Ionic EAP

  16. Ionic Polymer- Advantages Low voltages required1- 10 V Large bending displacements greater than 90 degrees

  17. Ionic Polymer-Disadvantages Don’t hold strain under DC current Relatively low actuation forces Relatively slow reaction times Hard to produce consistent materials Must be kept moist

  18. Ionic Polymer-Performance Moisture Deflection Voltage Reaction Rate Voltage Force/Lift Frequency Deflection

  19. Electric EAPs Stimulated by an applied electric field. Types: • Dielectric EAP • A dielectric material is placed between two electrodes. • To allow for movement of the EAP, the electrodes must be flexible. • Electrodes are a thin, conductive film, only a few nanometers thick, is deposited onto the surface of the EAP. • EAP is distorted when a voltage is applied. • Can be deformed by up to 400 percent of their original size. • Ferroelectric EAP • Become polarized when an electric field is applied to them. • Ability to transfer electrical energy to mechanical energy, and visa versa.

  20. Applications • Grippers • EAP fingers hold and release objects depending on sign of charge • Hand Gripper

  21. Applications • Generators • When a ferroelectric EAP is deformed, a voltage difference is created across it. • EAP generators on the ocean floor. • Boot heel generator.

  22. Applications • NASA is extremely interested in the progression of EAPs. • They envision EAPs replacing a wide range of heavy, expensive, and power hungry equipment. • The first application NASA has found for EAPs is as a wiper that would use small EAP fingers to clean dust and debris from sensitive equipment and lenses.

  23. Other Applications • EAP motivated Creatures • Snakes, aquatic animals, bugs, and airborne robots • Speakers • Pumps and Valves

  24. Summary of advantages • Inexpensive to manufacture • Large deformation • Ability to hold deformation • Rapid response time • Light weight

  25. Outlook for EAPs The ultimate goal for scientists and engineers is to create EAPs that mimic human muscles.

  26. Works Cited • Ashley, Steven. “Artificial Muscles.” Scientific American October, 2003. • Bar-Cohen, Yoseph Dr. “Electroactive Polymers – EAPs.” http://www.azom.com, April, 2003. • Bar-Cohen, Yoseph Dr. “Miniature Electroactive-Polymer Rakes.” http://www.nasatech.com/Briefs/Oct01/NPO20613.html, October, 2001. • Callister, William D. Materials Science and Engineering: An Introduction 6th Ed. New York: John Wiley & Sons, Inc. 2003 • ElectorActive Polymers- EAP’s. Azom.com. November 2003. <http://www.azom.com/details.asp?ArticleID=885#_Ionic_EAPs> • The International Society for Optical Engineering. “Low-Mass Muscle Actuatiors Act almost like the real thing.” http://www.spieweb.com, September 1998. • Staff. “Battery in a Boot.” http://www.techtv.com, March 13, 2002.

More Related