1 / 5

RSVP Extension for Muti-Topology Support

RSVP Extension for Muti-Topology Support. draft-zhao-rsvp-multi-topology-extension-00. Quintin Zhao, qzhao@huawei.com Huaimo Chen, Huaimochen@huawei.com Luyuang Fang, lufang@cisco.com Chao Zhou, czhou@cisco.com Lianyuan Li, lilianyuan@chinamobile.com

kueng
Télécharger la présentation

RSVP Extension for Muti-Topology Support

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RSVP Extension for Muti-Topology Support draft-zhao-rsvp-multi-topology-extension-00 Quintin Zhao, qzhao@huawei.com Huaimo Chen, Huaimochen@huawei.com Luyuang Fang, lufang@cisco.com Chao Zhou, czhou@cisco.com Lianyuan Li, lilianyuan@chinamobile.com Xin Huang, huangxin@chinamobile.com

  2. Background: IGP Support MT • IGP is extended to support Multi-Topology • OSPF is extended to support Multi-Topology, RFC 4915 • ISIS is extended to support Multi-Topology, RFC 5120 • Use MT-ID (a 12bit value) to identify logical topologies that overlay one physical topology • IGP (OSPF or IS-IS) computes separate SPF tree for each logical topology

  3. Extensions to RSVP-TE • Add MT Information into SESSION object • Extended P2P SESSION object for IPv4 IPv4 Tunnel End Address Resv MT-ID (12 bits) Tunnel ID Extended Tunnel ID • Extended P2MP SESSION object for IPv4 P2MP ID Resv MT-ID (12 bits) Tunnel ID Extended Tunnel ID

  4. MPLS Forwarding in MT • Option 1: MT is implied by Label • On a LSR, same FEC with different MT-ID are mapped to different Label • Advantages: Nochanges on the forwarding plane • Disadvantages: Label space is limited • Option 2: MT is indicated by stacked Label • One extra label is stacked to indicate a topology • Advantages: Each topology has a full label space • Disadvantages: Forwarding is complicated

  5. Next Step: • Look for suggestions and comments;

More Related