1 / 16

Inter-Comparisons of AATSR, MERIS and ATSR-2 Calibrations using Desert Targets

Inter-Comparisons of AATSR, MERIS and ATSR-2 Calibrations using Desert Targets. Dave Smith - Rutherford Appleton Laboratory. Objectives.

langer
Télécharger la présentation

Inter-Comparisons of AATSR, MERIS and ATSR-2 Calibrations using Desert Targets

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Inter-Comparisons of AATSR, MERIS and ATSR-2 Calibrations using Desert Targets Dave Smith - Rutherford Appleton Laboratory

  2. Objectives • Use remote desert sites to verify calibrations of AATSR and MERIS by comparison with other instruments (in particular ATSR-2), and in-situ radiometer measurements. • Long-term stability of sites will enable temporal calibration drifts to be determined. • Results can be extended to improve the calibrations of other instruments such as SCIAMACHY and AVHRR. • Crucial to blending of records of geophysical parameters derived from different sensors.

  3. Desert Calibration Targets Sudan - Egypt Sonora - Mexico

  4. Orbit 2136 comparison (MERIS/AATSR)

  5. AATSR AATSR AATSR MERIS MERIS MERIS 870 nm ATSR-MERIS Comparisons

  6. Orbit 2136 comparison (AATSR/ATSR-2) ATSR-2 870nm AATSR 870nm

  7. AATSR Data Processed to Date NOTE: Data before October 1st not used for validation

  8. Example ‘cloud’ test result Sonora, Mexico

  9. METRIC Extractions • METRIC tar files downloaded from MERIS Calibration Site (370 files to date) • No METRIC outputs for SONORA, Dunhuang, Hay, Amburla and Thangoo • HDF Files extracted from tar files and read by IDL routine • TOA reflectances extracted and stored in file for each site • Coincident MERIS and AATSR observations compared (11 match-ups so far) • How do METRIC cloud test results compare with AATSR?

  10. MERIS/AATSR Comparison 560nm RAATSR/RMERIS = 1.041 660nm RAATSR/RMERIS = 1.001 870nm RAATSR/RMERIS = 1.037

  11. ATSR-2 Desert Reflectances Use archive of ATSR-2 TOA Reflectances from 1995 to 2000

  12. AATSR/ATSR-2 Indirect comparisons RAATSR/RATSR-2 =0.945 RAATSR/RATSR-2 =1.081 RAATSR/RATSR-2 =1.132 RAATSR/RATSR-2=1.088

  13. AATSR vs. ATSR-2 Coincident Data

  14. Summary of Previous ATSR-2 Intercomparisons

  15. Summary of results obtained so far • First TOA reflectance extractions performed for selection of Desert targets for October 2002. • AATSR agrees well with MERIS RAATSR/RMERIS = 1.041 (560nm), 1.001 (660nm), 1.037 (870nm) • Significant differences observed between AATSR/MERIS and ATSR-2 RAATSR/RATSR-2 1.132 (560nm), 1.088 (660nm), 1.081 (870nm), 0.945 (1600nm) • Results consistent with other investigations (Haggolle, Govaerts)

  16. Remaining activities • Process remaining sites and coincident ATSR-2 data • MERIS/METRIC products for Sonora, Hay, Amburla, Thangoo and Dunhuang • Greenland Data – need data for period between May and August. • Atmospheric corrections • Walk through from raw data to calibrated radiances – identify possible processing errors • Long Term analysis – • Requires data products delivered on a regular (monthly) basis – preferably on CD-ROM rather than FTP site

More Related