1 / 10

Compensation of Lorenz detuning 1. Slide-jack tuner (A1, A2, A3)

Compensation of Lorenz detuning 1. Slide-jack tuner (A1, A2, A3) 2. Saclay tuner (C3, C4) 3. Blade tuner (C1) ( C2 & A4 were not tested, yet ). KEK Control system of Piezo Tuner. Piezo control by PC Monitor of detuning frequency. Piezo driver for

lawrence-oneal
Télécharger la présentation

Compensation of Lorenz detuning 1. Slide-jack tuner (A1, A2, A3)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Compensation of Lorenz detuning 1. Slide-jack tuner (A1, A2, A3) 2. Saclay tuner (C3, C4) 3. Blade tuner (C1) (C2 & A4 were not tested, yet) S1-G for TTC meeting Global Design Effort

  2. KEK Control system of Piezo Tuner Piezo control by PC Monitor of detuning frequency Piezo driver for KEK cavities (+1000V) Piezo driver for DESY/FNAL cavities (+200V) S1-G for TTC meeting Global Design Effort

  3. Parameters of Piezo drive pulse Pre-detuning by motor tuner drive frequency (Hz) Piezo drive pulse drive V Eacc control panel dc V D ft Single pulse of inverse cosine waveform Pinput RF Feedback / ON delay time S1-G for TTC meeting Global Design Effort

  4. Compensation of Lorentz detuning (A2) A2/MHI-06 38 MV/m A2/MHI-06 (Slide Jack) 38 MV/m drive f = 200Hz drive V = 400V dc V = 140V FB/on, Piezo/off FB/on, Piezo/on D f at rise time ~ 700Hz pre-det. ~ 600Hz drive f = 315Hz drive V = 400V dc V = 100V drive f = 300Hz drive V = 400V dc V = 35V D f ~ 200Hz 100Hz/div. drive f = 400Hz drive V = 300V dc V = 120V S1-G for TTC meeting Global Design Effort

  5. Compensation of Lorentz detuning (A3) A3/MHI-07 32.5 MV/m A3/MHI-07 (Slide-Jack) 32.5 MV/m drive f = 200Hz drive V = 500V dc V = 30V FB/on, Piezo/off FB/on, Piezo/on pre-det. ~ 500Hz drive f = 250Hz drive V = 400V dc V = 150V D f at rise time ~ 550Hz drive f = 300Hz drive V = 350V dc V = 200V D f ~ 120Hz 100Hz/div. drive f = 400Hz drive V = 250V dc V = 350V S1-G for TTC meeting Global Design Effort

  6. Compensation of Lorentz detuning (A1) A1/MHI-05 20 MV/m A1/MHI-05 (Slide Jack) 20 MV/m drive f = 200Hz drive V = 330V dc V = 30V FB/on, Piezo/off FB/on, Piezo/on pre-det. ~ 250Hz drive f = 250Hz drive V = 300V dc V = 30V D f at rise time ~ 270Hz drive f = 300Hz drive V = 200V dc V = 100V D f ~ 50Hz 50Hz/div. drive f = 400Hz drive V = 200V dc V = 100V S1-G for TTC meeting Global Design Effort

  7. Compensation of Lorentz detuning (C4) C4/Z109 29 MV/m C4/Z109 (Saclay Tuner) 29 MV/m drive f = 200Hz drive V = 130V dc V = 4V FB/on, Piezo/off FB/on, Piezo/on D f at rise time ~ 400Hz pre-det. ~ 180Hz drive f = 250Hz drive V = 120V dc V = 5V drive f = 300Hz drive V = 106V dc V = 16V D f ~ 500Hz 50Hz/div. drive f = 400Hz drive V = 94V dc V = 43V S1-G for TTC meeting Global Design Effort

  8. Compensation of Lorentz detuning (C3) C3/Z108 18 MV/m C3/Z108 (Saclay Tuner) 18 MV/m FB/on, Piezo/off FB/on, Piezo/on drive f = 200Hz drive V = 70V dc V = 4V pre-det. ~ 50Hz drive f = 250Hz drive V = 60V dc V = 30V D f at rise time ~ 150Hz drive f = 300Hz drive V = 56V dc V = 14V D f ~ 250Hz 50Hz/div. drive f = 400Hz drive V = 50V dc V = 24V S1-G for TTC meeting Global Design Effort

  9. Compensation of Lorentz detuning (C1) C1/AES004 25.6 MV/m C1/AES004 (Blade Tuner) 25.6 MV/m drive f = 200Hz drive V = 100V dc V = 2V FB/on, Piezo/off FB/on, Piezo/on pre-det. ~ 180Hz drive f = 250Hz drive V = 100V dc V = 4V D f at rise time ~ 320Hz drive f = 300Hz drive V = 80V dc V = 24V D f ~ 300Hz 50Hz/div. drive f = 400Hz drive V = 70V dc V = 38V S1-G for TTC meeting Global Design Effort

  10. Summary • Compensation of Lorentz force detuning by • KEK piezo tuner control system was • successfully demonstrated in three types of • piezo tuners ( Slide-jack tuner, Saclay tuner • and Blade tuner). S1-G for TTC meeting Global Design Effort

More Related